DOI QR코드

DOI QR Code

Effect of the Kind and Content of Raw Materials on Mechanical Performances of Hybrid Composite Boards Composed of Green Tea, Charcoals and Wood Fiber

녹차-숯-목재섬유 복합보드의 역학적 성능에 미치는 구성원료의 종류 및 배합비율의 영향

  • Park, Han-Min (Faculty of Forest Science, Institute of Agriculture & Life Science, Gyeongsang National University) ;
  • Heo, Hwang-Sun (Faculty of Forest Science, Institute of Agriculture & Life Science, Gyeongsang National University) ;
  • Sung, Eun-Jong (Faculty of Forest Science, Institute of Agriculture & Life Science, Gyeongsang National University) ;
  • Nam, Kyeong-Hwan (Faculty of Forest Science, Institute of Agriculture & Life Science, Gyeongsang National University) ;
  • Lim, Jae-Seop (Faculty of Forest Science, Institute of Agriculture & Life Science, Gyeongsang National University)
  • 박한민 (경상대학교 환경산림과학부, 농업생명과학연구원) ;
  • 허황선 (경상대학교 환경산림과학부, 농업생명과학연구원) ;
  • 성은종 (경상대학교 환경산림과학부, 농업생명과학연구원) ;
  • 남경한 (경상대학교 환경산림과학부, 농업생명과학연구원) ;
  • 임재섭 (경상대학교 환경산림과학부, 농업생명과학연구원)
  • Received : 2012.10.19
  • Accepted : 2013.01.21
  • Published : 2013.01.25

Abstract

In this study, eco-friendly hybrid composite boards were manufactured from green tea, three kinds of charcoals and wood fiber for developing interior materials to reinforce the strength performances and the functionalities in addition to performances of the green tea-wood fiber hybrid boards. The effects for the kind and the component ratio of raw materials on mechanical properties were investigated. Bending strength performances of hybrid composite boards were highest in the hybrid composite boards composed of green tea, fine charcoal and wood fiber on average. However, the difference caused by the kind of charcoals was not large. These values were was markedly improved than those of green tea - wood fiber hybrid composite boards reported in previous researches. And it was found that the bending strength performance decreased with increasing component ratios of green tea and charcoals. The difference between urea resins used as the binder showed the higher value in hybrid composite boards using $E_1$ grade urea resin than in those using $E_0$ grade urea resin, but the difference between hybrid composite boards manufactured by both resins decreased markedly than the green tea - wood fiber hybrid composite boards reported in previous research. The internal bond strength of hybrid composite boards was in the order of hybrid composite boards with fine charcoal, activated charcoal and black charcoal, and it was found that the hybrid composite boards with fine charcoal had a similar values to control boards composed of only wood fiber.

이 연구에서는 녹차-목재섬유 복합보드의 강도성능과 기능성을 보강한 건축내장재를 개발하기 위하여, 목재섬유에 녹차와 흑탄, 백탄, 활성탄 등 3종류의 숯을 혼합한 녹차-숯-목재섬유 복합보드를 제작하였고, 구성원료의 종류 및 그 배합비율이 복합보드의 정역학적 성능에 미치는 영향을 조사하였다. 녹차-숯-목재섬유 복합보드의 휨 강도성능은 백탄함유 복합보드에서 평균적으로 가장 높은 값을 나타내었으나, 숯의 종류에 따른 휨 강도성능의 차이는 크지 않았다. 그러나 그 값은 선행연구의 녹차-목재섬유 복합보드보다 현저한 휨 강도성능의 향상을 나타내었고, 녹차와 숯의 배합비율이 증가할수록 휨 강도성능의 감소가 확인되었다. 바인더로 사용된 요소수지의 종류에 따른 차이는 $E_1$급 요소수지를 사용한 복합보드가 $E_0$급 요소수지를 사용한 그것보다 높은 휨 강도성능을 나타냈지만, 양 수지간의 차이는 선행연구의 녹차-목재섬유 복합보드에 비해 현저히 감소하였다. 복합보드의 박리강도는 백탄 $$\geq_-$$ 활성탄 > 흑탄함유 복합보드의 순이었고, 백탄함유 복합보드에서는 목재섬유로만 구성된 대조보드와 거의 비슷한 값을 나타내는 것이 확인되었다.

Keywords

References

  1. 한국산업표준규격. 2011. KS F 3200. 섬유판.
  2. 강춘원, 박희준, 전순식. 2012. 억새파티클보드의 흡음 성능과 휨강도성능. 목재공학 40(1): 38-43.
  3. 공석우, 김병로. 2002. 국산 주요 수종 및 목질재료 탄화물의 흡착 특성. 목재공학 30(4): 33-40.
  4. 박상범 2006. 은행나무 잎을 혼합하여 제조한 파티클 보드의 물리․기계적 성질과 포름알데히드 저감효과. 임산에너지 25(2): 28-33.
  5. 박상범, 박주생. 2012. 대나무 숯 성형보드의 연소특성. 목재공학 40(1): 19-25.
  6. 박수경, 서문배, 이필우. 1976. 톱밥혼합률이 파티클보드재질에 미치는 영향. 목재공업 4(1): 33-37.
  7. 박한민, 강동현, 임나래, 이수경, 정강원, 김종철, 조경환 2010. 녹차와 목재섬유복합보드의 정적 휨 강도성능에 미치는 녹차배합비율의 영향. 농업생명과학연구 44(5): 1-8.
  8. 박한민, 이수경, 석지훈, 최남경, 권창배, 허황선, 변희섭, 양재경, 김종철 2011a. 녹차-목재섬유복합보드의 동적 탄성률에 미치는 녹차배합비율의 영향 및 휨 진동법에 의한 정적 휨 강도성능 예측. 목재공학 39(6): 538-547. https://doi.org/10.5658/WOOD.2011.39.6.538
  9. 박한민, 이수경, 석지훈, 최남경, 권창배, 허황선, 김종철 2011b. 목재섬유, 톱밥 및 녹차 이종복합보드의 정적 휨 강도성능에 미치는 녹차 및 톱밥 배합비율의 영향. 농업생명과학연구 45(6): 41-46.
  10. 박한민, 이수경, 석지훈, 최남경, 권창배, 허황선, 변희섭, 양재경, 김종철 2012. 이종복합보드의 동적탄성률에 미치는 녹차와 톱밥배합비율의 영향 및 정적 휨 강도성능의 예측. 농업생명과학연구 46(2): 9-17.
  11. 박한민, 허황선, 남경한, 임재섭 2012. 녹차-숯-목재섬유 복합보드의 물리적 특성. 목재공학 투고중.
  12. 안병준, 조태수, 이성숙, 백기현, 김선익 2009. 목탄을 이용한 친환경 건축자재 이용기술 (I)-목탄으로 제조된 건축자재의 특성평가-. 목재공학 37(6): 537-545.
  13. 오승원, 박희준. 2010. 톱밥과 왕겨 혼합보드로 제조된 세라믹의 표면온도변화-수지함침률 및 탄화온도의 영향-. 목재공학 38(1): 43-48. https://doi.org/10.5658/WOOD.2010.38.1.43
  14. 이원희, 변희섭, 배현미. 1998. 폐타이어를 이용한 목질 고무 복합패널의 물성에 관한 연구-원료혼합비율에 따른 복합패널의 재질변화-. 목재공학 26(1): 70-75.
  15. 이필우, 윤형운, 김대준, 손정일. 1993. 슬러지-파티클보드의 제조가능성 및 구성비율에 관한 기초연구. 목재공학 21(2): 57-65.
  16. 전 양. 1985. 마섬유 첨가로 인한 하드보드 재질변화. 목재공학 13(6): 36-39.
  17. 이세나, 이병호, 김현중, 김수민, 엄영근. 2009. 대나무 분말의 함량 및 입자크기에 따른 바이오 복합재의 물성평가. 목재공학 37(4): 310-319.
  18. 이오규, 최원준, 조태수, 백기현 2007. 목탄계 건축자재에 의한 포름알데히드 흡착. 목재공학 35(3): 61-69.
  19. 한태형, 신랑호, 권진헌. 2005. 목재파티클과 재생폴리 프로필렌을 이용한 복합패널제조 및 물성에 관한 연구. 목재공학 33(6): 46-54.
  20. 井出 勇, 石原 茂久, 川井秀一, 吉田 弥寿郎, 中路 誠, 高松 敦久. 1991. 耐火性炭素複合材料の製造と開發(第1報) - グラファイトフェノールフォルムアルデ ヒド樹脂熱硬化性オーバーレイしたパーティクルボー ドの耐火性能と物性. 木材學會誌 37(11): 1026-1033.
  21. 井出 勇, 石原 茂久, 樋口 尙登, 西川 昌信, 1994. 竹炭からの機能性炭素複合材料素材の開發. 材料 43(485): 152-157.