DOI QR코드

DOI QR Code

Adsorption Characteristics of BTEX on Dust Collecting Electrode Coated with Activated Carbon

활성탄으로 코팅된 집진전극의 BTEX 흡착특성

  • Nam, Sangchul (Water Resource and Environment Research Department, Korea Institute of Construction Technology) ;
  • Kim, Hyun Jung (Water Resource and Environment Research Department, Korea Institute of Construction Technology) ;
  • Kim, Kwang Soo (Water Resource and Environment Research Department, Korea Institute of Construction Technology)
  • 남상철 (한국건설기술연구원 수자원환경본부) ;
  • 김현정 (한국건설기술연구원 수자원환경본부) ;
  • 김광수 (한국건설기술연구원 수자원환경본부)
  • Received : 2013.10.21
  • Accepted : 2013.11.11
  • Published : 2013.12.31

Abstract

This study was performed to provide the basic data for the function of BTEX removal for compact electrostatic precipitator which are applicable to indoor environment (or closed spaces). For this purpose, the adsorption equilibrium test was conducted for BTEX of activated carbon sheet (ACS) and activated carbon (AC), and the adsorption characteristics of AC and ACS were evaluated using the Langmuir constant which was obtained from the adsorption characteristics, adsorption capacity and regression calculation. The surface area and adsorption pore volume of ACS reduced by 70% and 86%, respectively, as compared to those of AC, and the adsorption capacities of BTEX also showed a similar level. Thus, it is considered that ACS applied electrostatic precipitator is able to remove dust and BTEX simultaneously.

Keywords

References

  1. Ahmad, A., A. Idris, and D. Mahmoud (2011) Equilibrium, kinetic and thermodynamic studies on the adsorption of basic dye by lowcost adsorbent, J. Adv. Sci. Eng. Res., 1(4), 200-229.
  2. Ataka, Y., S. Kato, S. Murakami, Q. Zhu, K. Ito, and T. Yokota (2004) Study of effect of adsorptive building material on formaldehyde concentrations: development of measuring methods and modeling of adsorption phenomena, Indoor Air, 14(8), 51-64.
  3. Chang, C.L. and H. Bai (1999) An experimental study on the performance of a single discharge wire-plate electrostatic precipitator with back corona, J. Aerosol Sci., 30(3), 325-340. https://doi.org/10.1016/S0021-8502(98)00064-0
  4. Daifullah, A.A.M. and B.S. Girgis (2003) Impact of surface characteristics of activated carbon on adsorption of BTEX, Colloids and Surfaces A: Physicochem. Eng. Aspects, 214, 181-193. https://doi.org/10.1016/S0927-7757(02)00392-8
  5. EPA (1987) Total Exposure Assessment Methodology (TEAM) Study, U.S. EPA, 600/S6-87/002.
  6. Gupta, V.K., A. Mittal, and V. Gajbe (2005) Adsorption and desorption studies of a water soluble dye, quinoline yellow, using materials, J. Colloid Interface Sci., 284(1), 89-98. https://doi.org/10.1016/j.jcis.2004.09.055
  7. Jeon, B.H., Y.K. Hwang, H.A. Kim, S.H. Lee, K.D. Ahn, and Y. Heo (2008) Indoor air concentration of particulate matter and endotoxin in public facilities, J. Korean Soc. Occup. Environ. Hyg., 18(4), 262-270.
  8. Jeong, S.H. and S.S. Kim (1998) A study on the electrohydrodynamic flow in a rectangular impactor with positive corona discharge, Aerosol Sci. Tech., 29(1), 1-16.
  9. Jeppu, G.P. and T.P. Clement (2012) A modified Langmuir-Freundlich isotherm model for simulating pH-dependent adsorption effects, J. Contaminant Hydrology, 129-130, 46-53. https://doi.org/10.1016/j.jconhyd.2011.12.001
  10. Kim, Y.J., W.S. Hong, H.O. Choi, B.H. Ham, C.S. Min, and K.S. Yu (1994) Experimental and Finite Difference Method (FDM) analysis on collection characteristics of electrostatic precipitator, J. Korean Soc. Atmos. Environ., 10(1), 49-56. (in Korean with English abstract)
  11. Korea Institute of Construction Technology (2012) Technology development of noise and dust reduction for road environmental improvement, KICT 2012-149.
  12. Langmuir, I. (1918) The adsorption of gases on plane surface of glass, mica and platinum, J. Am. Chem. Soc., 40(9), 1361-1403. https://doi.org/10.1021/ja02242a004
  13. Lee, J.J., J. Cho, and H.T. Kim (2011) Adsorption kinetic and thermodynamic studies of tricyclazole on granular activated carbon, Environ. Eng. Research, 33, 623-629.
  14. Namkoong, W., J.S. Park, K. Kim, and Y.J. Park (2000) Removal characteristics of a compost as filling material in biofiltering BTEX gases, J. Korean Organ. Res. Recycl., 8(2), 53-59.
  15. No, S.Y., K.H. Kim, J.H. Choi, S.D. Han, I.S. Kil, D.H. Kim, and Y.W. Rhee (2008) Adsorption characteristics of VOCs in activated carbon beds, J. Korean Soc. Atmos. Environ., 24(4), 455-469. (in Korean with English abstract) https://doi.org/10.5572/KOSAE.2008.24.4.455
  16. Park, S.H. and C.Y. Park (2000) Effects of the block distance of collecting plate and particle size on the particle deposition efficiency in the two-stage electrostatic precipitator, J. Korean Soc. Atmos. Environ., 16(2), 165-177. (in Korean with English abstract)
  17. Seo, J.M., M.S. Jung, B.K. Jeon, K.C. Choi, J.W. Park, and J.H. Park (2006) A device performance measurement a small size electric precipitator for a indoor air purification, Proceeding of the 43th Meeting of KOSAE(2006).
  18. Shin, W.H., W.S. Hong, and D.K. Song (2010) Relationship between ICAC EP-7 and %RMS, standards for gas flow uniformity inside electrostatic precipitators, J. Korean Soc. Atmos. Envron., 26(2), 234-240. https://doi.org/10.5572/KOSAE.2010.26.2.234
  19. Song, D.K., S.H. Jung, W.S. Hong, W.H. Shin, S.H. Shim, B.M. Han, H.J. Kim, and Y.J. Kim (2009) Removal efficiency of $PM_{2.5}$ using electrostatic precipitators, Proceeding of the 49th Meeting of KOSAE (2009).
  20. Yang, J.Y., H.H. Kim, D.C. Shin, Y.S. Kim, J.R. Sohn, J.H. Kim, and Y.W. Lim (2008) Health risk assessment of occupants in the small scale public facilities for aldehydes and VOCs, J. Environ. Sci., 17(1), 45-56.