DOI QR코드

DOI QR Code

Performance Evaluation of Steel Moment Resisting Frames with Seismic Retrofit Using Fragility Contour Method

내진 보강된 철골모멘트골조의 취약성 등고선을 통한 성능평가

  • Kim, Su Dong (Department of Architectural Engineering, Sejong University) ;
  • Lee, Kihak (Department of Architectural Engineering, Sejong University) ;
  • Jeong, Seong-Hoon (Department of Architectural Engineering, Inha University) ;
  • Kim, Do Hyun (Disaster Prevention Research Team, Daewoo E&C Co. Ltd.)
  • Received : 2012.06.22
  • Accepted : 2012.12.05
  • Published : 2013.01.02

Abstract

Due to a high level of system ductility, steel moment resisting frames have been widely used for lateral force resisting structural systems in high seismic zones. Earthquake field investigations after Northridge earthquake in 1994 and Kobe earthquake in 1995 have reported that many steel moment resisting frames designed before 1990's had suffered significant damages and structural collapse. In this research, seismic performance assessment of steel moment resisting frames designed in accordance with the previous seismic provisions before 1990's was performed. Buckling-restrained braces and shear walls are considered for seismic retrofit of the reference buildings. Increasing stiffness and strength of the buildings using buckling-restrained braces and shear walls are considered as options to rehabilitate the damaged buildings. Probabilistic seismic performance assessment using fragility analysis results is used for the criteria for determining an appropriate seismic retrofit strategy. The fragility contour method can be used to provide an intial guideline to structural engineers when various structural retrofit options for the damaged buildings are available.

Keywords

References

  1. Lee J. Experimental and Analytical Study for Buckling Restrained Bracing Systems using Channel Sections. Sejong University Master's Degree Thesis, 2009.
  2. Kim JG, Park JH, Lee K, Lee J. Seismic performance of Buckling Restrained Braces Using Steel Plates and Channel Sections. Journal of Architectural Institute of Korea. 2007;Vol(10):19-26.
  3. UBC, Uniform Building Code. International Conference of Building Officials, Whittier, CA. 1997.
  4. Lee K, Foutch DA. Performance evaluation of new steel frame buildings for seismic load. Earthquake Eng. Struct. Dyn., 2002;31(3):653-670. https://doi.org/10.1002/eqe.147
  5. Somerville P, Smith N, Puntamurthula S, Sun J. Development of ground motion time histories for phase 2 of the FEMA/SAC steel project. SAC Background Document SAC/BD-97/04, SAC Joint Venture, Richmond, CA, 1997.
  6. Shin JW. Evaluation of Seismic Performance and R-Factor of Steel MRF Building Before and After Repair. Sejong University Master's Degree Thesis, 2010.
  7. Park DJ, Joo YG, Kim MH, Kim DH, Kim SD. Evaluation of Hysteretic Behaviors of the Buckling Restrained Braces According to the Unconstrained Length. Journal of Architectural Institute of Korea. 2006;22(12):37-46.
  8. Kebeyasawa T, Shiohara H, Otani, S. US-Japan Cooperative research on R/C Full-scale building test, Part 5:Discussion on dynamic response system. 8th World Conference on Earthquake Engineering, Vol. 6, San Francisco, California. 1984;627-634.
  9. Vulcano A, Bertero V.V, Colotti V. Analytical modeling of R/C structural walls. Report No. UCB.EERC-88/17, EERC. University of Califormia, Berkeley, California. 1988.
  10. Linde P, Numerical modeling and capacity design of earthquakeresistant reinforced concrete walls. Report No. 200. Institute of Structural Engineering. Swiss Federal Institute of Technology (ETH). Zurich, Birkh auser, Basel. 1993.
  11. Kim TW, Foutch DA, LaFave JM. A Practical Model for Seismic Analysis of Reinforced Concrete Shear Wall Buildings. Journal of Earthquake Engineering. 2005;9(3):393-417.
  12. Kutay Orakcal and John W. Wallace. Flexural Modeling of Reinforced Concrete Walls-Experimental Verification. ACI, 196-205.
  13. Jeong SH, Elnashai AS. Probabilistic Fragility Analysis Parameterized by Fundamental Response Quantities. Engineering Structures. 2007;29(6):1238-1251. https://doi.org/10.1016/j.engstruct.2006.06.026
  14. ATC-40. Seismic Evaluation and Retrofit of Concrete Buildings, Applied Technology Council, Redwood City, California. 1996.
  15. FEMA-273. NEHRP Guidelines for the Seismic Rehabilitation of Buildings. Washington, DC. 1997.
  16. Saiidi M, Sozen MA. Simple nonlinear seismic analysis of RC structures Journal of Structural Engineering. ASCE. 1981;107(5): 937-953.
  17. Fajfar P, Fischinger M. N2 - A method for non-linear seismic analysis of regular structures. Proceedings from the 9th World Conference on Earthquake Engineering. Tokyo-Kyoto, Japan, 1988;111-116.
  18. Qi X, Moehle JP. Displacement design approach for reinforced concrete structures subjected to earthquakes. EERC Report 91/02, Earthquake Engineering Research Center, Berkeley, California. 1991.
  19. ASCE, Seismic Rehabilitation of Existing Buildings (ASCE/SEI 41-06). American Society of Civil Engineers, Reston, Virginia. 2007.
  20. Jeong SH, Lee K, Lee DH. Fragility Contour Method for the Seismic Performance Assessment of Generic Structures. Journal of Earthquake Engineering Society of Korea. 2011;15(3):65-72. https://doi.org/10.5000/EESK.2011.15.3.065
  21. Shin JW, Lee K, Jeong SH. Seismic Performance Evaluation of Steel moment Resisting Frame with Various Hysteresis Connection Models. Journal of Architectural Institute of Korea. 2009;25(11):19-27.