Journal of Korean Society of Environmental Engineers (대한환경공학회지)

Korean Society of Environmental Engineers (대한환경공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Cellulosic Fiber Filter Using Replacement Liquid in Water-Swollen Fiber with Non-Polar Solvent

Non-Polar 물질 수분치환에 의한 종이필터 개발

  • 김광수 (한국건설기술연구원 환경연구실) ;
  • 안광호 (한국건설기술연구원 환경연구실) ;
  • 박재로 (한국건설기술연구원 환경연구실) ;
  • 김현정 (한국건설기술연구원 환경연구실)
  • Received : 2013.10.11
  • Accepted : 2013.10.30
  • Published : 2013.10.30
Download PDF
⟨ Previous Next ⟩

Abstract

The purposes of this study are to prepare Hanji fiber-filter sheets using replacement liquid in water-swollen fiber with non-polar solvent such as ethanol, methanol and pentane. The experiments were studied on the selection of optimal non-polar solvent and the optimal drying method for wetted fiber and then were to know physicochemical characteristics of prepared Hanji fiber-filter sheet. The Ethanol as liquid changer in water-swollen fiber was excellent solvent and the optimal drying method for them was freeze drying served with vacuum pump. The bulk density and porosity of prepared fiber sheet from freeze dryer were 0.11-0.13 g/mL, half of natural dried fiber sheet, and 90%, respectively. The results of SEM observation for the fiber sheet prepared with natural drying or heating drying were shown very close structure of fiber wall in dry state. However, the freeze drying sheet were shown the open structure. So, the head loss of freeze drying sheet was very lower than natural drying and heating drying sheets. From the results of BTEX removal experiments, the sheets dried at water wetted condition was shown more higher efficiency than the fiber sheets dried at solvent wetted condition.

본 연구의 목적은 수분이 함유된 한지의 수분을 에탄올, 메탄올, 펜탄 등과 같은 비극성물질로 치환하여 한지 여과지를 만드는데 있다. 실험은 적정 비극성물질의 선택 및 적정 건조방법 그리고 제조된 한지여과지의 물리화학적 특성을 알아보기 위하여 수행되었다. 한지 종이필터를 제조하기 위하여 한지에 함유된 수분을 치환하기 위한 최적 물질은 에탄올이었으며 적정한 건조방법은 냉동 후 진공에 의해 수분을 건조하는 냉동건조방법이었다. 냉동건조에 의해 제조된 필터의 겉보기 밀도는 0.11-0.13 g/mL 으로 자연건조방법의 절반 이었으며 공극율은 약 90%로서 다공성을 나타내었다. 전자현미경 관찰결과 자연건조 및 열건조에 의해 제조된 여과지의 섬유는 섬유끼리 매우 가깝게 밀착되어 있었으나 냉동건조에 의해 제조된 섬유는 섬유간에 간격이 이격되어 있었다. 제조된 여과지의 압력손실은 자연건조 및 열건조 여과지보다 냉동건조에 의해 제조된 한지가 매우 낮았으며 BTEX제거효율은 한지의 수분을 비극성 물질에 의해 치환한 것보다 자연건조시킨 한지가 우수하였다.

Keywords

References

  1. Lee, H. L. and Kim, Y. J., "Source Apportionment of PM2.5 Mass for Different Air Mass Pathway Conditions during Asian Dust and Biomass Burning Episodic Periods in 2001," 2004 KEER Spring conference, p. 635(2004).
  2. Chai, M., Lu, M. Keener, T., Khang, S. J., Chaiwatpongsakorn, C. and Tisch J., "Using an improved electrostatic precipitator for poultry dust removal," J. Electrostat., 67(6), 870-875(2009). https://doi.org/10.1016/j.elstat.2009.07.006
  3. Wang, Y., Gui, K., Shi, M. and Li, C., "Removal of dust from flue gas in magnetically stabilized fluidized bed," Particuol., 6(2), 116-119(2008). https://doi.org/10.1016/j.partic.2007.09.001
  4. JeonJu paper-Jeon Ju mil (2013), JeonJu Mumeum Digital Brochure.
  5. Brinchi, L., Cotana, F., Fortunati, E. and Kenny, J. M., "Production of anocrystalline cellulose from lignocellulosic biomass: Technology and applications," Carbohydrate Polym., 94(1), 154-169(2013). https://doi.org/10.1016/j.carbpol.2013.01.033
  6. Lavoine, N., Desloges, I., Dufresne, A. and Bras, J., "Microfibrillated cellulose-Its barrier properties and applications in cellulosic materials: A review," Carbohydrate Polym., 90(2), 735-764(2012). https://doi.org/10.1016/j.carbpol.2012.05.026
  7. Svenssona, A., Larssona, P. T., Salazar-Alvareza, G. and Wagberga, L., "Preparation of dry ultra-porous cellulosic fibres: Characterization and possible initial uses," Carbohydrate Polym., 92(1), 775-783(2013). https://doi.org/10.1016/j.carbpol.2012.09.090