References
- C. S. Jung, 2011, "Status and Future Trend of Alternative fuel for Petroleum", K Petro magazine, Vol. 101, pp. 38-45.
- S. H. Choi and Y. T. Oh, 2007, "An Experimental Study on Simultaneous Reduction of Smoke and NOx with Biodiesel Fuel in a CRDI Type Diesel Engine", KSAE, Vol. 15, No. 3, pp. 35-40.
- K. S. Jeong et al., 2011, "Combustion and Emission Characteristics of Biodiesel Blended Fuel by EGR Rate in a 4-cylinder CRDI Diesel Engin", KSAE, Vol. 19, No. 4, pp. 130-136.
- K. H. Kim et al., 2011, "Combustion Characteristics of Biodiesel Blended Fuel by Fuel Injection Timing and Pressure in a CRDI Diesel Engine", KSPSE, 2011, KSPSE Fall Conference, pp. 3-6.
- S. Saravanan, G. Nagarajan and S. Sampath, 2010, "Multi response optimization of NOx emission of a stationary diesel engine" Fuel, Vol. 89, Issue 11, pp. 3235-3240. https://doi.org/10.1016/j.fuel.2010.05.015
- S. H. Park, 2009, "Modern Design of Experiments", Min Young Sa, Soeul, pp. 63-76, 417-420.
- B. C. Yoon, 2002, "Statistical Analysis of Life", Books Hill, Soeul, pp. 203-218.
- K. T. Kim and Y. S. Kim, 2009, "Process Optimization for Thermal-sprayed Ni-based Hard Coating by Design of Experiments", KSPSE, Vol 13, No. 5, pp. 89-94.
- K. T. Kim, J. D. Kim and Y. S. Kim, 2011, "Effect of Process Parameters on the Hardness and Wear Rate of Thermal Sprayed Ni-based Coatings", KSPSE, Vol 15, No. 1, pp. 51-56. https://doi.org/10.9726/kspse.2011.15.1.051
- K. T. Kim and Y. S. Kim, 2012, "Optimization for Thermal spray Process by Taguchi Method", KSPSE, Vol 16, No. 2, pp. 54-59. https://doi.org/10.9726/kspse.2012.16.2.054
- Y. K. Lim et al., 2009, "Determination of Fuel Properties for Blended Biodiesel from Various Vegetable Oils", Korean Chem. Eng. Res., Vol. 47, No. 2, pp. 237-242.
- J. D. Kim et al., 2011, "An Experimental Study on Spray Characteristics of Diesel and Bio-diesel Fuel", KSME, Vol. 35, No. 1, pp. 53-59. https://doi.org/10.5916/jkosme.2011.35.1.053
Cited by
- Selection of Factors for Performance Optimization on Non-esterified Bio-diesel Fuel Using Fractional Factorial Design vol.39, pp.1, 2015, https://doi.org/10.5916/jkosme.2015.39.1.8
- Study of the Adsorption Possibility of SOx and NOx Using Porous Diatomite Ceramic vol.25, pp.1, 2013, https://doi.org/10.9726/kspse.2021.25.1.005