References
- S.-S. Choi and H.-S. Chung, "Influence of filler and cure systems on whitening of EPDM composites by formation of metal salt", Elast. Compos., 47, 210 (2012). https://doi.org/10.7473/EC.2012.47.3.210
- Q. Zhao, X. Li, and J. Gao, "Aging behavior and mechanism of ethylene-propylene-diene monomer (EPDM) rubber in fluorescent UV/condensation weathering environment", Polym. Degrad. Stab., 94, 339 (2009). https://doi.org/10.1016/j.polymdegradstab.2008.12.007
- Q. Zhao, X. Li, J. Gao, and Z. Jia, "Evaluation of ethylene-propylene-diene monomer(EPDM) aging in UV/condensation environment by principal component analysis (PCA)", Mater. Lett., 63, 1647 (2009). https://doi.org/10.1016/j.matlet.2009.03.039
- H. Yu, G. Xu, X. Shen, X. Yan, C. Hu, and Y. Wang, "Corrosion resistance and infrared emissivity properties of EPDM (EPDM-g-MAH) film on low infrared emissivity PU/Cu coating" Electrochim. Acta., 55, 1843 (2010). https://doi.org/10.1016/j.electacta.2009.10.077
- Y.-W Chang, J. K. Mishra, S.-K Kim, and D.-K Kim, "Effect of supramolecular hydrogen bonded network on the properties of maleated ethylene propylene diene rubber/maleated high density polyethylene blend based thermoplasticelastomer", Mater Lett., 60, 3118 (2006). https://doi.org/10.1016/j.matlet.2006.02.055
- S. Saikrasun and T. Amornsakchai, "Self-reinforcing elastomer composites based on polyolefinic thermoplastic elastomer and thermotropic liquid crystalline polymer", J. Appl. Polym. Sci., 107, 2375 (2008). https://doi.org/10.1002/app.27092
- C. Yi, Z. Peng, H. Wang, M. Li, and C. Wang, "Synthesis and characteristics of thermoplastic elastomer based on polyamide-6", Polym. Int., 60, 1728 (2011). https://doi.org/10.1002/pi.3140
- J. Markarian, "Thermoplastic elastomer compounds continue upward trend", Plast., Addti. Compound., 10, 38 (2008).
- D. Yamaguchi, M. Cloitre, P. Panine, and L. Leibler, "Phase behavior and viscoelastic properties of thermoplastic elastomer gels based on ABC triblock copolymers", Macromolecules, 38, 7798 (2005). https://doi.org/10.1021/ma050294e
- P. Pasbakhsh, H. Ismail, M. N. Ahmad Fauzi, and A. Abu Bakar, "Influence of maleic anhydride grafted ethylene propylene diene monomer (MAH-g-EPDM) on the properties of EPDM nanocomposites reinforced by halloysite nanotubes", Polym. Test., 28, 548 (2009). https://doi.org/10.1016/j.polymertesting.2009.04.004
- G. M. O. Barra, J. S. Crespo, J. R. Bertolino, V. Soldi, and A. T. Nunes Pires, "Maleic anhydride grafting on EPDM : Qualitative and quantitative determination", J. Braz. Chem. Soc., 10, 31 (1999). https://doi.org/10.1590/S0103-50531999000100006
- C. Shao, G. Xu, X. Shen, H. Yu, and X. Yan, " Infrared emissivity and corrosion-resistant property of maleic anhydride grafted ethylene-propylene-diene terpolymer (EPDM-g-MAH)/Cu coatings", Surf. Coat. Technol., 204, 4075 (2010). https://doi.org/10.1016/j.surfcoat.2010.05.036
- W. S. Chow, A. A. Bakar, Z. A. Mohd Ishak, J. Karger-Kocsis, and U. S. Ishiaku, "Effect of maleic anhydride-grafted ethylene-propylene rubber on the mechanical, rheological and morphological properties of organoclay reinforced polyamide 6/polypropylene nanocomposites" Eur. Polym., 41, 687 (2005). https://doi.org/10.1016/j.eurpolymj.2004.10.041
- O. Grigoryeva and J. Karger-Kocsis, "Melt grafting of maleic anhydride onto an ethylene-propylene-iene terpolymer (EPDM)", Eur. Polym., 36, 1419 (2000). https://doi.org/10.1016/S0014-3057(99)00205-0
- C. D. Silva, B. Haidar, A. Vidal, J. M. Brendle, R. L. Dred, and L. Vidal, "Preparation of EPDM/synthetic montmorillonite nanocomposites by direct compounding", J. Mater. Sci., 40, 1813 (2005). https://doi.org/10.1007/s10853-005-0701-0
- S.-S Choi and S.-H Ha, "Water swelling behaviors of silica-reinforecd NBR composites in deionized water and salt solution", Ind. Eng. Chem., 16, 238 (2010). https://doi.org/10.1016/j.jiec.2010.01.052
- Y. K. Chae, W. Y. Kang, J.-H. Jang, and S.-S. Choi, "A simple NMR method to measure crosslink density of natural rubber composite", Polym. Test., 29, 953 (2010). https://doi.org/10.1016/j.polymertesting.2010.08.003
- M. E. Ries, M. G. Brereton, P. G. Klein, and P. Dounis, "A proton NMR investigation of crosslinks and entanglements in polyethylene networks and star polymers", Polym. Gel. Net., 5, 285 (1997). https://doi.org/10.1016/S0966-7822(97)00004-X
-
J. Sohma, C. Qun, W. Yuanshen, X.-W. Qu, and M. Shiotani, "Solid-state high-resolution
$^{13}C$ -NMR study of crosslinks in heavily gamma-irradiated polyethylene original research Article", Rad. Phys. Chem., 37, 47 (1991). - H.-M Kwon and S.-S Choi "Swelling behaviors of maleic anhydride-grafted EPDM by treatment with dichloroacetic acid", Elast. Compos., 48, 55 (2013). https://doi.org/10.7473/EC.2013.48.1.55
- B. Guo, F. Chen, Y. Lei, X. Liu, J. Wan, and D. Jia, "Styrene-butadiene rubber/halloysite nanotubes nanocomposites modified by sorbic acid", Appl. Surf. Sci., 255, 7329 (2009). https://doi.org/10.1016/j.apsusc.2009.03.092
- Z. Hrnjak-Murgic, J. Jelencic, M. Bravar, and M. Marovic, "Influence of the network on the interaction parameter in system EPDM vulcanizate-Solvent", J. Appl. Polym. Sci., 65. 991 (1997). https://doi.org/10.1002/(SICI)1097-4628(19970801)65:5<991::AID-APP17>3.0.CO;2-V
Cited by
- Effects of ZnO content on microstructure and properties of maleated EPDM/zinc oxide composites vol.72, pp.5, 2015, https://doi.org/10.1007/s00289-015-1330-7