DOI QR코드

DOI QR Code

Evaluation of a FPGA controlled distributed PV system under partial shading condition

  • Chao, Ru-Min (Department of Systems and Naval Mechatronics Engineering, National Cheng Kung University) ;
  • Ko, Shih-Hung (Department of Systems and Naval Mechatronics Engineering, National Cheng Kung University) ;
  • Chen, Po-Lung (Department of Systems and Naval Mechatronics Engineering, National Cheng Kung University)
  • 투고 : 2013.05.08
  • 심사 : 2013.07.02
  • 발행 : 2013.06.25

초록

This study designs and tests a photovoltaic system with distributed maximum power point tracking (DMPPT) methodology using a field programmable gate array (FPGA) controller. Each solar panel in the distributed PV system is equipped with a newly designed DC/DC converter and the panel's voltage output is regulated by a FPGA controller using PI control. Power from each solar panel on the system is optimized by another controller where the quadratic maximization MPPT algorithm is used to ensure the panel's output power is always maximized. Experiments are carried out at atmospheric insolation with partial shading conditions using 4 amorphous silicon thin film solar panels of 2 different grades fabricated by Chi-Mei Energy. It is found that distributed MPPT requires only 100ms to find the maximum power point of the system. Compared with the traditional centralized PV (CPV) system, the distributed PV (DPV) system harvests more than 4% of solar energy in atmospheric weather condition, and 22% in average under 19% partial shading of one solar panel in the system. Test results for a 1.84 kW rated system composed by 8 poly-Si PV panels using another DC/DC converter design also confirm that the proposed system can be easily implemented into a larger PV power system. Additionally, the use of NI sbRIO-9642 FPGA-based controller is capable of controlling over 16 sets of PV modules, and a number of controllers can cooperate via the network if needed.

키워드

과제정보

연구 과제 주관 기관 : National Science Council

참고문헌

  1. Chao, R.M., Ko, S.H., Pai, F.S., Lin, I.H. and Chang, C.C. (2009), "Evaluation of a photovoltaic energy mechatronics system with built in quadratic maximum power point tracking algorithm", Sol. Energy, 83(12), 2177-2185. https://doi.org/10.1016/j.solener.2009.08.011
  2. Chowdhury, S.R. and Saha, H. (2010), "Maximum power point tracking of partially shaded solar photovoltaic arrays", Sol. Energ. Mat. Sol. C, 94(9), 1441-1447. https://doi.org/10.1016/j.solmat.2010.04.011
  3. Ko, S.H. and Chao, R.M. (2012), "Photovoltaic dynamic MPPT on a moving vehicle", Sol. Energy, 86(6), 1750-1760. https://doi.org/10.1016/j.solener.2012.03.013
  4. Linares, L., Erickson, R.W., MacAlpine, S. and Brandemuehl, M. (2009), "Improved energy capture in series string photovoltaics via smart distributed power electronics", Proceedings of the IEEE Applied Power Electronics Conference and Exposition, Washington D.C., USA, February.
  5. Kouchaki, A., ImanEini, H. and Asaei, B. (2013), "A new maximum power point tracking strategy for PV arrays under uniform and non-uniform insolation conditions", Sol. Energy, 91, 221-232. https://doi.org/10.1016/j.solener.2013.01.009
  6. Maki, A., Valkealahti, S. and Leppaaho, J. (2012), "Operation of series-connected silicon-based photovoltaic modules under partial shading conditions", Prog. Photovoitanics, 20(3), 298-309. https://doi.org/10.1002/pip.1138
  7. MartinezMoreno, F., Munoz, J. and Lorenzo, E. (2010), "Experimental model to estimate shading losses on PV arrays", Sol. Energ. Mat. Sol. C, 94(12), 2298-2303. https://doi.org/10.1016/j.solmat.2010.07.029
  8. Pai, F.S. and Chao, R.M. (2010), "A new algorithm to photovoltaic power point tracking problems with quadratic maximization", IEEE T. Energy Conver., 25(1), 262-264. https://doi.org/10.1109/TEC.2009.2032575
  9. Paraskevadaki, E.V. and Papathanassiou, S.A. (2011), "Evaluation of MPP voltage and power of mc-Si PV modules in partial shading conditions", IEEE T. Energy Conver., 26(3), 923-932. https://doi.org/10.1109/TEC.2011.2126021
  10. Petrone, G., Spagnuolo, G. and Vitelli, M. (2007), "Analytical model of mismatched photovoltaic fields by means of Lambert W-function", Sol. Energ. Mat. Sol. C, 91(18), 1652-1657. https://doi.org/10.1016/j.solmat.2007.05.021
  11. Petrone, G., Spagnuolo, G. and Vitelli, M. (2010), "A new technique for distributed maximum power point tracking PV applications", Proceedings of the IEEE International Conference on Ind. Technology
  12. Roman, E., Alonso, R., Ibanez, P., Elorduizapatarietxe, S. and Goitia, D. (2006), "Intelligent PV module for grid-connected PV systems", IEEE T. Ind. Electron., 53(4), 1066-1073. https://doi.org/10.1109/TIE.2006.878327
  13. Roman, E., Martinez, V., Jimeno, J.C., Ibanez, P. and Elorduizapatarietxe, S. (2008), "Experimental results of controlled PV module for building integrated PV systems", Sol. Energy, 82(5), 471-480. https://doi.org/10.1016/j.solener.2007.09.004
  14. Walker, G.R. and Sernia, P.C. (2004), "Cascaded DC-DC converter connection of photovoltaic modules", IEEE T. Power Electr., 19(4), 1130-1139. https://doi.org/10.1109/TPEL.2004.830090
  15. Woyte, A. Nijs, J. and Belmans, R. (2003), "Partial shadowing of photovoltaic arrays with different system configurations: literature review and field test results", Sol. Energy, 74(3), 217-233. https://doi.org/10.1016/S0038-092X(03)00155-5
  16. Xiao, W., Ozog, N. and Dunford, W.G. (2007), "Topology study of photovoltaic interface for maximum power point tracking", IEEE T. Ind. Electron., 54(3), 1696-1704.

피인용 문헌

  1. Multicore PSO Operation for Maximum Power Point Tracking of a Distributed Photovoltaic System under Partially Shading Condition vol.2016, 2016, https://doi.org/10.1155/2016/9754514
  2. Evaluation of a Distributed Photovoltaic System in Grid-Connected and Standalone Applications by Different MPPT Algorithms vol.11, pp.6, 2018, https://doi.org/10.3390/en11061484
  3. A wireless monitoring system for monocrystalline PV system vol.7, pp.2, 2020, https://doi.org/10.12989/eri.2020.7.2.123