대한치과기공학회지 (Journal of Technologic Dentistry)

  • 제35권4호
  • /
  • Pages.343-352
  • /
  • 2013
  • /
  • 1229-3954(pISSN)
  • /
  • 2288-5218(eISSN)
대한치과기공학회 (Korean Academy of Dental Technology)
권호 표지
DOI QR코드

DOI QR Code

ZrN 코팅된 치과 주조용 Co-Cr 합금의 부식거동

Corrosion Behaviors of ZrN Coated on Dental Co-Cr Alloys

  • 투고 : 2013.10.11
  • 심사 : 2013.12.23
  • 발행 : 2013.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Purpose: The purpose of this study was to investigate to effect of the ZrN coated on corrosion resistance and physical property of dental Co-Cr alloys using various instruments. Methods: The specimens were used, respectively, for experiment, Arc Ion plating was carried out for dental casting alloys using ZrN coated materials with nitrogen gas. ZrN coated surface of each specimen was observed with field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), vickers hardness tester, and electrochemical tester. Results: The current density of ZrN coated specimen was smaller than that of non-coated specimen in 0.9% NaCl solution. Pit nucleated at scratch of specimen. The pitting corrosion resistant |$E_{max}-E_{rep}$| increased in order of ZrN coated (110 mV), and non-coated wire (100 mV). Conclusion: The corrosion potential of the ZrN coated specimen was comparatively high. the surface of ZrN coated specimen was more smooth than that of other kinds of non-coated specimen. ZrN coated surface showed higher hardness than that of non-coated surface.

키워드

참고문헌

  1. Santhanam AT. Effects of TiN and ZrN Coating on Surface Characteristics, US Patent, 5, 257-367, 1993.
  2. Ramalho A, Viera MT, Miranda AS. Effects of TiN and ZrN Coating on Surface Characteristics of Orthodontic Wire. Edited by Mihaly Kosma, 3, 309, 1993.
  3. Breme E, Einsenbarth H, Hilerbrand. Biomimetic Implant coating, Biomol Eng, 24, 27-32, 2007. https://doi.org/10.1016/j.bioeng.2006.05.016
  4. Brunette D, Tengvall MP, Textor M, Thomsen P. Production of Microfabricated S urfaces and Their Effects on Cell Behavior. Titanium in medicine, 1, 343-373, 2001.
  5. Erturk E, Heuvel HJ. Adhesion and structure of TiN arc coatings. Thin Solid Films, 153, 135- 147, 1989.
  6. Choe HC. Interface activation and surface characteristics of Ti/TiN/HA coated sintered stainless steels. Surf Coat Tech, 112, 299- 309, 1999. https://doi.org/10.1016/S0257-8972(98)00773-7
  7. Earnshaw R. Microstruct Lire and Physical Properties of Alloys for Partial Denture Castings. J Brit Dent, 67, 101, 1956.
  8. Craig R, brien OWJ, power JM. Effect of Polishing Systems on the Surface Roughness of Microhybrid Composites. Restorative Dental materials, 2, 201, 1979.
  9. Civilian S, Hugut EF, Errhard WL, Vaccaro GJ. Multiple Arteriosclerotic Arterial Aneurysms. J pros Dent, 28, 77, 1972. https://doi.org/10.1016/0022-3913(72)90157-6