References
- Chandra, Jeya, and Schall, Susan. 1988. "The Use of Repeated Measurements to Reduce the Effect of Measurement Errors." IIE Transactions 20:83-7. https://doi.org/10.1080/07408178808966154
- Chen, Shieh-Liang, and Chung, Kun-Jen. 1996. "Selection of the Optimal Precision Level and Target Value for a Production Process: The Lower-Specification-Limit Case." IIE Transactions 28:979-85. https://doi.org/10.1080/15458830.1996.11770752
- Drezner, Zvi, and Wesolowsky, George O. 1990. "On the Computation of the Bivariate Normal Integral." Journal of Statistical Computation and Simulation 35:101-7. https://doi.org/10.1080/00949659008811236
- Grubbs, Frank A., and Coon, Helen J. 1954. "On Setting Test Limits Relative To Specification Limits." Industrial Quality Control 10:15-20.
- Hooke, Robert, and Jeeves, T. A. 1966. "Direct Search of Numerical and Statistical Problems." Journal of ACM 8:212-29.
- Jeong, Seong Hoon, Kongsuwan, Pauline, Truong, Nguyen Khoa Viet, and Shin, Sangmum. 2013. "Optimal Tolerance Design and Optimization for a Pharmaceutical Quality Characteristics." Mathematical Problems in Engineering. doi: 10.1155/2013/706962.
- Kim, Young Jin, Cho, Byung-Rae, and Kim, Nam Ki. 2007. "Economic Design of Inspection Procedures Using Guard Band When Measurement Errors Are Present." Applied Mathematical Modelling 31:805-16. https://doi.org/10.1016/j.apm.2005.12.008
- Lin, Chih-Young, Hong, Chien-Long, and Lai, Jiing-Yih. 1997. "Improvement of a Dimensional Measurement Process Using Taguchi Robust Designs." Quality Engineering 9:561-73. https://doi.org/10.1080/08982119708919078
- Mader, Douglas P., Prins, Jack, and Lampe, Rod E. 1999. "The Economic Impact of Measurement Error." Quality Engineering 11:563-74. https://doi.org/10.1080/08982119908919276
- Park, Young-Hyun. 1998. "A Study of Quality Costs in a Multicomponent and Low Volume Products Automated Manufacturing System." Quality Improvement Through Statistical Methods (ed. B. Abraham) 405-14.
- Rishi, Swanand. 2012. "Guard-Banding Methods - An Overview." Proceedings of AdMET 2012 (Paper No. UM001). London: UK.
- Tang, Kwei, and Schneider, Helmut. 1988. "Selection of the Optimal Inspection Precision Level for a Complete Inspection Plan." Journal of Quality Technology 20:153-6. https://doi.org/10.1080/00224065.1988.11979100