References
- AASHTO. (2010). AASHTO LRFD bridge design specifications (5th ed.). Washington, DC: American Association of State Highway and Transportation Officials.
- ACI Committee 318. (2011). ACI 318-11 building code requirements for reinforced concrete and commentary. Farmington Hills, MI: American Concrete Institute.
- Bischoff, P. H. (2005). Reevaluation of deflection prediction for concrete beams reinforced with steel and fiber reinforced polymer bars. Journal of Structural Engineering, ASCE, 131(5), 752-767. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:5(752)
- Bischoff, P. H. (2007). Rational model for calculating deflection of reinforced concrete beams and slabs. Canadian Journal of Civil Engineering, 34, 992-1002. https://doi.org/10.1139/l07-020
- Bischoff, P. H., & Paixao, R. (2004). Tension stiffening and cracking of concrete reinforced with glass fiber reinforced polymer (GFRP) bars. Canadian Journal of Civil Engineering, 31, 579-588. https://doi.org/10.1139/l04-025
- Broms, B. B. (1965a). Technique for investigation of internal cracks in reinforced concrete members. In ACI Journal, Proceedings (Vol. 62, No. 1, pp. 35-44). Jan. 1965.
- Broms, B. B. (1965b) Crack width and crack spacing in reinforced concrete members. In ACI Journal, Proceedings (Vol. 62, No. 10, pp. 1237-1256), Oct. 1965.
- CEB-FIP Model Code. (1990). In Comite Euro-International du Beton, June 1991.
- CEB-FIP, Model Code for Concrete Structures. (1978). CEBFIP international recommendations (3rd ed., p. 348). Paris, France: Comite Euro-International du Beton.
- Chowdhury, S. H., & Loo, Y. C. (2001). A new formula for prediction of crack widths in reinforced and partially prestressed concrete beam. Advances in Structural Engineering, 4(2), 101-109. https://doi.org/10.1260/1369433011502390
- Frosch, R. J. (1999). Another look at cracking and crack control in reinforced concrete. ACI Structural Journal, 96(3), 437-442.
- Frosch, R. J. (2001). Flexural crack control in reinforced concrete, design and construction practices to mitigate cracking SP 204 (pp. 135-154). Farmington Hills, MI: American Concrete Institute.
- Kwak, H. G. & Filippou F. C. (1990), Finite element analysis of reinforced concrete structures under monotonic loads, A report No. UCB/SEMM-90/14. University of California, Berkeley, CA.
- Nawy, E. G. (1968). Crack control in reinforced concrete structures. In Journal of the American Concrete Institute, Proc. (Vol. 65, pp. 825-838). Farmington Hills, MI, October 1968.
- Ng, P. L., Lam, J. Y. K., & Kwan, A. K. H. (2010). Tension stiffening in concrete beams. Part 1: FE analysis. Proceedings of the ICE-Structures and Buildings, 163(1), 19-28. https://doi.org/10.1680/stbu.2009.163.1.19
- Odman, S. T. A. (1962). Stresses in axially reinforced concrete prisms subjected to tension and exposed to drying. Stockholm: Swedish Cement and Concrete Research Institute at the Royal Institute of Technology, NR34.
- Reis, E. E. Jr., Mozer, J. D., Bianchini, A. C. and Kesler, C. E. (1964). Causes and control of cracking in concrete reinforced with high strength steel Bars-A review of research, T. & A. M. Report No. 261, University of Illinois, IL.
- Shahrooz, B. M., Miller, R. A., Harries, K. A. & Russell, H. G. (2011). Design of Concrete Structures Using High-Strength Steel Reinforcement, NCHRP Report 679, Transportation Research Board, 83 pp + appendices.
- Thomas, F. G. (1936). Cracking in reinforced concrete. The Structural Engineer, 14, 298-320.
Cited by
- Automated Surface Wave Measurements for Evaluating the Depth of Surface-Breaking Cracks in Concrete vol.9, pp.3, 2015, https://doi.org/10.1007/s40069-015-0110-y
- Evaluation of Bond Properties of Reinforced Concrete with Corroded Reinforcement by Uniaxial Tension Testing vol.10, pp.3, 2013, https://doi.org/10.1007/s40069-016-0152-9
- Shear Crack Control for High Strength Reinforced Concrete Beams Considering the Effect of Shear-Span to Depth Ratio of Member vol.10, pp.4, 2013, https://doi.org/10.1007/s40069-016-0161-8
- Seismic performance of RC bridge piers reinforced with varying yield strength steel vol.12, pp.2, 2017, https://doi.org/10.12989/eas.2017.12.2.201
- Field-Observed Cracking of Paired Lightweight and Normalweight Concrete Bridge Decks vol.11, pp.1, 2013, https://doi.org/10.1007/s40069-016-0176-1
- Corrosion Deterioration of Steel in Cracked SHCC vol.11, pp.3, 2013, https://doi.org/10.1007/s40069-017-0205-8
- Evaluation of the Compatibility of Repair Materials for Concrete Structures vol.11, pp.3, 2013, https://doi.org/10.1007/s40069-017-0208-5
- Confinement Effect on Material Properties of RC Beams Under Flexure vol.98, pp.4, 2017, https://doi.org/10.1007/s40030-017-0221-3
- Experimental Study on Shear Behavior of Steel Fiber Reinforced Concrete Beams with High-Strength Reinforcement vol.11, pp.9, 2013, https://doi.org/10.3390/ma11091682
- Influence of the Loading Speed on the Ductility Properties of Corroded Reinforcing Bars in Concrete vol.12, pp.6, 2013, https://doi.org/10.3390/ma12060965
- A Prediction Model for Concrete Cracks due to Chloride-Induced Corrosion vol.2020, pp.None, 2013, https://doi.org/10.1155/2020/1049258
- Stochastic characteristics of reinforcement corrosion in concrete beams under sustained loads vol.25, pp.5, 2020, https://doi.org/10.12989/cac.2020.25.5.447
- High-Strength Steel Reinforcement (ASTM A1035/A1035M Grade 690): State-of-the-Art Review vol.146, pp.8, 2013, https://doi.org/10.1061/(asce)st.1943-541x.0002720
- Ductility and durability enhancement of concrete EPS by new reinforcement arrangements and polypropylene FRC utilization vol.48, pp.4, 2013, https://doi.org/10.1139/cjce-2019-0195