International Journal of Ocean System Engineering

  • 제3권4호
  • /
  • Pages.225-230
  • /
  • 2013
  • /
  • 2233-6478(pISSN)
  • /
  • 2233-7059(eISSN)
한국해양공학회 (Korean Society of Ocean Engineers)
권호 표지
DOI QR코드

DOI QR Code

Comparison of Sloshing Pressures in 2D and 3D Tanks

  • Kim, Yonghwan (Department of Naval Architecture and Ocean Engineering, Seoul National University) ;
  • Kim, Sang-Yeob (Department of Naval Architecture and Ocean Engineering, Seoul National University) ;
  • Kim, Jieung (Department of Naval Architecture and Ocean Engineering, Seoul National University) ;
  • Lee, Jae-Hoon (Department of Naval Architecture and Ocean Engineering, Seoul National University)
  • 투고 : 2013.09.08
  • 심사 : 2013.11.11
  • 발행 : 2013.11.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper introduces the experimental results of sloshing model tests carried out at Seoul National University. Two 1/50-scale tanks, i.e., 2D and 3D models with the same shape, were manufactured for the comparative study. Particular interest was taken in the differences in impact pressures between the 2D and 3D models. Regular motion tests were conducted for different filling depths. For each filling depth, 500 cycles of regular excitation were imposed at each frequency. To observe the characteristics and severity of sloshing from the acquired pressure data, statistical analyses were performed, not only for the peak pressure, but also for the area-concept indices, which represented the amount of impulse.

키워드

참고문헌

  1. Det Norske Veritas, Sloshing Analysis of LNG Membrane Tanks, Classification Notes, No. 30.9, (2006).
  2. Lloyd's Register, Sloshing Assessment Guid-ance Document for Membrane Tank LNG Operations, Guidance Document, (2009).
  3. Bureau Veritas, Design Sloshing Loads for LNG Membrane Tanks, Guidance Note, (2011).
  4. Bunnik T., Huijsmans R., Largescale LNG Sloshing Model Test, International Journal of Offshore and Polar Engineering, 19 (1) (2009) 8-14.
  5. Wemmenhove R., Luppes R., Veldman A., Bunnik T., Numerical simulation of sloshing in LNG tanks with a compressible two-phase model, Proceedings of 26th International Conference on Offshore Mechanics and Arctic Engineering, San Diego, California, USA, June 10-15, (2007).
  6. Loysel T., Chollet S., Gervaise E., Brosset L., De Seze PE., Results of the First Sloshing Model Test Benchmark. Proceedings of the 22nd International Offshore and Polar Engi-neering Conference, Rhodes, Greece, June 17-22, (2012).
  7. Ahn Y., Kim K.H., Kim S.Y., Lee S.W., Kim Y., Lee J.H., Experimental Study on the Effects of Pressure Sensors and Time Window in Violent Sloshing Pressure Measurement. Proceedings of the 23rd International Offshore and Polar Engineering Conference, Alaska, USA, June 30-July 5, (2013).
  8. Faltinsen O.M., Timokha A.N., Sloshing, Cambridge University Press, (2009).
  9. Kim Y., Kim S.Y., Yoo W.J., Statistical Evalu-ation of Local Impact Pressures in Sloshing, Proceedings of the 20th International Offshore and Polar Engineering Conference, Beijing, China, June 20-25, (2010).

피인용 문헌

  1. A set of canonical problems in sloshing. Part 2: Influence of tank width on impact pressure statistics in regular forced angular motion vol.105, 2015, https://doi.org/10.1016/j.oceaneng.2015.06.016