한국표면공학회지 (Journal of Surface Science and Engineering)

  • 제46권6호
  • /
  • Pages.242-247
  • /
  • 2013
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지
DOI QR코드

DOI QR Code

하이브리드 코팅 시스템에 의해 합성된 Zr-Al-N 박막의 미세구조와 기계적 특성, 산화 특성, 부식특성

Microstructure, Mechanical, Oxidation and Corrosion Properties of Zr-Al-N Coatings Synthesized by the Hybrid Coating System

  • Choi, Hasong (School of Materials Science and Engineering, Pusan National University) ;
  • Jang, Jaeho (Korea Institute of Industrial Technology (KITECH)) ;
  • An, Eunsol (Korea Institute of Industrial Technology (KITECH)) ;
  • Kim, Kwang Ho (School of Materials Science and Engineering, Pusan National University)
  • 투고 : 2013.12.02
  • 심사 : 2013.12.20
  • 발행 : 2013.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Zr-Al-N coatings were synthesized by the hybrid coating system combining arc ion plating and DC magnetron sputtering from a Zr and an Al target in argon-nitrogen atmosphere, respectively. By changing the power applied on the Al cathodes, the Zr-Al-N coatings with various Al contents were deposited. The microstructure and chemical compositions of the Zr-Al-N coatings were studied by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM). With increasing of Al content in the coatings, the solid solution (Zr, Al)N crystallites were observed in the Zr-Al-N coatings. The nanohardness of the Zr-Al-N coatings exhibited a maximum value of 42 GPa for the Zr-Al (7.9 at.%)-N, and decreased with further increase in Al content in the coatings. The oxidation and corrosion behavior of the Zr-Al-N coatings revealed better properties compared than those of ZrN coatings due to the formation of a solid solution.

키워드

참고문헌

  1. D. Jianxin, L. Jianhua, Z. Jinlong, S. Wenlong, N. Ming, Wear, 264 (2008) 298. https://doi.org/10.1016/j.wear.2007.03.014
  2. A. Fragiel, M. H. Staia, J. M. Saldana, E. S. P. Cabrera, C. C. Escobedo, L. Cota, Surf. Coat. Technol., 202 (2008) 3653. https://doi.org/10.1016/j.surfcoat.2008.01.001
  3. D. Roman, J. Bernardi, C. L. G. Amorim, F. S. Souza, A. Spinelli, C. Giacomelli, C. A. Figueroa, I. J. R. Baumvol, R. L. O. Basso, Mater. Chem. Phys., 130 (2011) 147. https://doi.org/10.1016/j.matchemphys.2011.06.013
  4. M. A. Auger, J. J. Araiza, C. Falcony, O. Sanchez, J. M. Albella, Vacuum, 81 (2007) 1462. https://doi.org/10.1016/j.vacuum.2007.04.009
  5. L. Krusin-Elbaum, M. Wittmer, Thin Solid Films, 107(1) (1983) 111. https://doi.org/10.1016/0040-6090(83)90013-5
  6. D. McIntyre, J. E. Greene, G. Hakansson, J.-E. Sundgren, W.-D. Munz, J. Appl. Phys., 67(3) (1990) 1542. https://doi.org/10.1063/1.345664
  7. S. PalDey, S. C. Deevi, Mat. Sci. Engin. A, 58 (2003) 342.
  8. W.-D. Munz, J. Vac. Sci. Technol. A, 4(6) (1986) 2717. https://doi.org/10.1116/1.573713
  9. O. Knotek, M. Bohmer, T. Leyendecker, J. Vac. Sci. Technol. A, 4(6) (1986) 2695. https://doi.org/10.1116/1.573708
  10. S. Inoue, H. Uchida, Y. Yoshinaga, K. Koterazawa, Thin Solid Films, 171 (1997) 300.
  11. C. W. Kim, K. H. Kim, Thin Solid Films, 307 (1997) 113. https://doi.org/10.1016/S0040-6090(97)00212-5
  12. P. Panjan, B. Navinsek, M. Cekada, A. Zalar, Vaccum 53 (1999) 127. https://doi.org/10.1016/S0042-207X(98)00407-2
  13. H. Klostermann, F. Fietzke, T. Modes, O. Zywitzki, Rev. Adv. Mater. Sci., 15 (2007) 33.
  14. R. Sanjines, C. S. Sandu, R. Lamni, F. Levy, Surf. Coat. Technol., 200 (2006) 6308. https://doi.org/10.1016/j.surfcoat.2005.11.113
  15. Y. Makino, M. Mori, S. Miyake, K. Saito, K. Asami, Surf. Coat. Technol., 193 (2005) 219. https://doi.org/10.1016/j.surfcoat.2004.07.036
  16. J.-L. Ruan, J.-L. Huang, J. S. Chen, D.-F. Lii, Surf. Coat. Technol., 200 (2005) 1652. https://doi.org/10.1016/j.surfcoat.2005.08.106
  17. R. Lamni, R. Sanjines, F. Levy, Thin Solid Films, 478 (2005) 170. https://doi.org/10.1016/j.tsf.2004.10.049
  18. J. J. Araiza, O. Sanchez, J. Phys. D: Appl. Phys., 42 (2009) 115422. https://doi.org/10.1088/0022-3727/42/11/115422
  19. H. Hasegawa, M. Kawate, T. Suzuki, Surf. Coat. Technol., 200 (2005) 2409. https://doi.org/10.1016/j.surfcoat.2004.08.208
  20. D. Holec, R, Rachbauer, L. Chen, L. Wang, D. Luef, P. H. Mayrhofer, Surf. Coat. Technol., 206 (2011) 1698. https://doi.org/10.1016/j.surfcoat.2011.09.019
  21. A. Lasalmoni, J. L. Strudel, J. Mater. Sci., 21 (1986) 1837. https://doi.org/10.1007/BF00547918
  22. Y. G. Ko, K. M. Lee, K. R. Shin, D. H. Shin, J. Kor. Inst. Met. Mater., 48 (2010) 8. https://doi.org/10.3365/KJMM.2010.48.01.008
  23. H. C. Barshilia, N. Selvakumar, B. Deepthi, K. S. Rajam, Surf. Coat. Technol., 201 (2006) 2193. https://doi.org/10.1016/j.surfcoat.2006.03.037

피인용 문헌

  1. Laser Surface Treatment of Magnesium Alloy using ZrO2for Corrosion Resistance vol.15, pp.4, 2016, https://doi.org/10.14775/ksmpe.2016.15.4.093