References
- H.L. Eiselstein : Metallurgy of Columbium-Hardened Nickel-Chromium-Iron Alloy, Advances in the Technology of Stainless Steels and Related Alloys, STP 369, ASTM (1965)
- D.D. Krueger : The Development of Direct Age 718 for Gas Turbine Engine Disk Applications, Proc. Conf. Superalloy 718-Metallurgy and Applications, E.A. Loria, ed., TMS, Warrendale, PA, (1989) 279-296
- D.G. Ahn and K.W. Byun : Investigation of Cutting Characteristics in the Sharp Corner for the Case of Cutting of Inconel 718 Superalloy Sheet using High-power CW Nd:YAG Laser, Journal of KWJS, 26 (2008) 90-96 (in Korean)
- J.F. Radavich : The Physical Metallurgy of Cast and Wrought Alloy 718, Proc. Conf. Superalloy 718- Metallurgy and Applications, E.A. Loria, ed., TMS, Warrendale, PA, (1989) 229-240
- M. Sundararaman, P. Mukhopadhyay and S. Banerjee : Some Aspects of the Precipitation of Metastable Intermetallic Phases in Inconel 718, Metall. Trans. A, 23A (1992) 2015-2018
- S.T. Wlodek and R.D. Field : The Effects of Long Time Exposure on Alloy 718, Proc. Conf. Superalloy 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, (1994) 659-670
- K. Sivaprasad and S. Ganesh Sundara Raman : Influence of Weld Cooling Rate on Microstructure and Mechanical Properties of Alloy 718 Weldments, Metall. Mater. Trans. A, 39A (2008) 2115-2127
- G.A. Knorovsky, M.J. Cieslak, T.J. Headley, A.D. Romig, Jr. and W.F. Hammetter : Inconel 718: A Solidification Diagram, Metall. Trans. A, 20A (1989) 2149-2158
- A.K. Abdul Jawwad, M. Strangwood and C.L. Davis : Microstructural Modification in Full Penetration and Partial Penetration Electron Beam Welds in Inconel 718 (IN 718) and Its Effect on Fatigue Crack Initiation, Metall. Mater. Trans. A, 36A (2005) 1237-1247
- A. Ulas and E. Boysan : Numerical Analysis of Regenerative Cooling in Liquid Propellant Rocket Engines, Aerospace Sci. Tech., 24 (2013) 187-197 https://doi.org/10.1016/j.ast.2011.11.006
- Y. Nakao and C.Y. Kang : Welding and Bonding of Superalloys, Journal of KWJS, 8 (1990) 8-19 (in Korean)
- A. Odabasi, N. Unlu, G. Goller na d M.N. Eruslu : A Study on Laser Beam Welding (LBW) Technique: Effect of Heat Input on the Microstructural Evolution of Superalloy Inconel 718, Metall. Mater. Trans. A, 41A (2010) 2357-2365
- G.D. Janaki Ram, A. Venugopal Reddy, K. Prasad Rao, G.M. Reddy and J.K. Sarin Sundar : Microstructure and Tensile Properties of Inconel 718 Pulsed Nd-YAG Laser Welds, J. Mater. Process. Technol. 167 (2005) 73-82 https://doi.org/10.1016/j.jmatprotec.2004.09.081
- J.K. Hong, J.H. Park, N.K. Park, I.S. Eom, M.B. Kim and C.Y. Kang : Microstructures and Mechanical Properties of Inconel 718 Welds by CO2 Laser Welding, J. Mater. Process. Technol. 201 (2008) 515-520 https://doi.org/10.1016/j.jmatprotec.2007.11.224
- W.A. Baeslack III, S.L. West and T.J. Kelly : Weld Cracking in Ta-Modified Cast Inconel 718, Scripta Metall. 22 (1988) 729-734 https://doi.org/10.1016/S0036-9748(88)80191-1
- N.L. Richards, X. Huang and M.C. Chaturvedi : Heat Affected Zone Cracking in Cast Inconel 718, Mater. Charact. 28 (1992) 179-187 https://doi.org/10.1016/1044-5803(92)90080-2
- I.S. Woo and K. Nishimoto : Metallurgical Factors Contributing to HAZ Cracking Susceptibility in Cast Alloy 718 Welds and Its Improvement by Cerium Addition, Met. Mater. Int. 7 (2001) 241-249 https://doi.org/10.1007/BF03026982
- C.I. Garcia, A.K. Lis, E.A. Loria and A.J. Deardo : Thermomechanical Processing and Continuous Cooling Transformation Behavior of IN 718, Proc. Conf. Superalloys 1992, S.D. Antolovich et al., ed., TMS, Warrendale, PA, (1992) 527-536
- J.J. Pepe and W.F. Savage : Effects of Constitutional Liquation in 18Ni Maraging Steel Weldments, Weld. J., 46 (1967) 411s-422s
- R. Nakkalil, N.L. Richards and M.C. Chaturvedi : Grain Boundary Liquid Film Migration During Welding of Incoloy 903, Scripta Metall. Mater., 26 (1992), 1599-1604 https://doi.org/10.1016/0956-716X(92)90263-E
- O.A. Ojo and M.C. Chaturvedi : Liquation Microfissuring in the Weld Heat-Affected Zone of an Overaged Precipitation-Hardened Nickel-Base Superalloy, Metall. Mater. Trans. A, 38 (2007), 356-369 https://doi.org/10.1007/s11661-006-9025-1
- H.M. Wang, J.H. Zhang, Y.J. Tang and Z.Q. Hu : Rapidly Solidified MC Carbide Morphologies of a Laser-Glazed Single-Crystal Nickel-Base Superalloy, Mater. Sci. Eng. A, 156 (1992) 109-116 https://doi.org/10.1016/0921-5093(92)90421-V