참고문헌
- Park, J. S., Kim, H. K., Kim, C. U., Hwang, T. K., Hong, C. S. and Kim, C. G., 2001, "Behavior Analysis and Strain Measurement of the Filament Wound Composite Tank Part I. Finite Element Analysis of the Filament Wound Tank," The Korean Society for Aeronautical & Space Sciences, Vol. 29, No. 7, pp. 49-55.
- Zickel, J., 1962, "Isotensoid Pressure Vessel," ARS Journal, Vol. 32, No. 6, pp. 950-951.
- Doh, Y. D. and Hong, C. S., 1995, "Progressive Failure Analysis for Filament Wound Pressure Vessel," Journal of Reinforced Plastics and Composites, Vol. 14, No. 12, pp. 1278-1306. https://doi.org/10.1177/073168449501401203
- Hartung, R. F., 1963, "Planar-wound Filamentary Pressure Vessels," AIAA Journal, Vol. 1, No. 12, pp. 2842-2844. https://doi.org/10.2514/3.2181
- Lee, Y. S., Cho, W. M., Lee, B. E. and Koo, S. H., 1993, "Nonlinear Stress Analysis of Pressure Vessel for Various Dome Shape and Thickness," Trans. Korean Soc. Mech. Eng. A, Vol. 17, No. 10, pp. 2634-2645.
- Choi, Y. G., Shin, K. B. and Kim, W. H., 2010, "A Study on Size Optimization of Rocket Motor Case using the Modified 2D Axisymmetric Finite Element Model," International Journal of Precision Engineering and Manufacturing, Vol. 11, No. 6, pp. 901-907. https://doi.org/10.1007/s12541-010-0109-x
- Hwang, T. K., Park, J. B., Kim, H. G., Doh, Y. D. and Moon, S. I., 2007, "Dome Shape Design and Performance Evaluation of Composite Pressure Vessel," Journal of Korean Society for Composite Materials, Vol. 20, No. 4, pp. 31-41.
- Liang, C. C., Chen, H. W. and Wang, C. H., 2002, "Optimum Design of Dome Contour for Filament Wound Composite Pressure Vessels based on a Shape Factor," Composite Structures, Vol. 58, No. 4, pp. 469-482. https://doi.org/10.1016/S0263-8223(02)00136-8
- Filament Wound Composite Pressure Vessels based on a Shape Factor," Composite Structures, Vol. 58, No. 4, pp. 469-482.
- Yurko, A. A. and Esslinger, J. R., 2005, "Affordable High Performance Composite Case Rocket Motor Manufacturing," 41st AIAA/ASME/ SAE/ASEE Joint Propulsion Conference.
- Mard, F., 1993, "Design, Manufacture and Test of the Composite Case for ERINT-1 Solid Rocket Motor," 29th AIAA/ASME/SAE/ASEE Joint Propulsion Conference.
- Kim, C. U., Park, J. S., Hong, C. S. and Kim, C. G., 2000, "Analysis of Filament Wound Pressure Tank Considering Winding Angle Variation In Thickness Direction," Journal of Korean Society for Composite Materials, Vol. 13, No. 2, pp. 51-59.
- ANSYS Training Manual 12.0, 2009.
피인용 문헌
- Numerical Evaluation of Backward Extrusion and Head Nosing for Producing a 6.75L Small Seamless AA6061 Liner vol.22, pp.4, 2013, https://doi.org/10.5228/KSTP.2013.22.4.204
- Predictions of the Cooling Performance on an Air-Cooled EV Battery System According to the Air Flow Passage Shape vol.40, pp.12, 2016, https://doi.org/10.3795/KSME-B.2016.40.12.801