Earthquakes and Structures

  • 제5권6호
  • /
  • Pages.753-779
  • /
  • 2013
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic collapse propagation in 6-story RC regular and irregular buildings

  • Karimiyan, Somayyeh (International Institute of Earthquake Engineering and Seismology (IIEES)) ;
  • Moghadam, Abdolreza S. (International Institute of Earthquake Engineering and Seismology (IIEES)) ;
  • Karimiyan, Morteza (Applied Science and Technology University) ;
  • Kashan, Ali Husseinzadeh (Department of Industrial Engineering, Faculty of Engineering, Tarbiat Modares University)
  • 투고 : 2013.06.12
  • 심사 : 2013.09.13
  • 발행 : 2013.12.20
⟨ 이전 논문 다음 논문 ⟩

초록

One of the most important issues in progressive collapse mechanism of the buildings is evaluation of the collapse distribution in presence of the earthquake loads. Here, collapse propagation is investigated by tracking down the location and type of the collapsed beam and column elements, from the first element to the entire buildings. 6-story reinforced concrete ordinary moment resisting frame buildings with one directional mass eccentricity of 0%, 5%, 15% and 25% are studied to investigate differences among the progressive collapse mechanism of the regular and irregular buildings. According to the results of the nonlinear time history analyses, there are some patterns to predict progressive collapse scenarios in beam and column elements of the similar regular and irregular buildings. Results also show that collapse distribution patterns are approximately independent of the earthquake records.

키워드

참고문헌

  1. Alashker, Y., Li, H. and EL-Tawil, S. (2011), "Approximations in progressive collapse modeling", J. Struct. Eng., 137, 914-924. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000452
  2. Bao, Y., Kunnath, S.K., El-Tawil, S. and Lew, H.S. (2012), "Macromodel-based simulation of progressive collapse: RC frame structures", Struct. Eng., 134(7), 1079-1091.
  3. Bazant, Z.P. and Verdure, M. (2007), "Mechanics of progressive collapse: learning from world trade center and building demolitions", J. Eng. Mech. - ASCE, 133 (3), 308-319. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:3(308)
  4. Biskinis, D. and Fardis, M.N. (2009), "Deformations of concrete members at yielding and ultimate under monotonic or cyclic loading (including repaired and retrofitted members)", Report Series in Structural and Earthquake Engineering, Report No. SEE 2009-01.
  5. Burnett, E.F.P. (1975a), "Abnormal loading and building safety", American Concrete Institute, Int. Concrete Res. Inform. Portal, SP 48, 141-190.
  6. Ellingwood, B. (2006), "Mitigating risk from abnormal loads and progressive collapse", J. Perform. Constr. Facil. 20, Special Issue: Mitigating the Potential for Progressive Disproportionate Structural Collapse, 315-323. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(315)
  7. El-Tawil, S., Khandelwal, K., Kunnath, S. and Lew, H.S. (2007), "Macro models for progressive collapse analysis of steel moment frame buildings", Proc. Structures Congress 2007, Long Beach, CA.
  8. Eslami, A. and Ronagh, H.R. (2012), "Effect of elaborate plastic hinge definition on the pushover analysis of reinforced concrete buildings", Struct. Des.Tall Sp., doi: 10.1002/tal.1035.
  9. Ettouney, M., Smilowitz, R., Tang, M. and Hapij, A. (2012), "Global system considerations for progressive collapse with extensions to other natural and man-made hazards." J. Perform. Constr. Facil. 20, 403-417.
  10. FEMA P695 (2009), Quantification of building seismic performance factors, Prepared by Applied Technology Council, www.ATCouncil.org.
  11. Filippou, F.C. (1999), "Analysis platform and member models for performance-based earthquake engineering", U.S.-Japan Workshop on Performance-Based Earthquake Engineering Methodology for Reinforced Concrete Building Structures, PEER Report 1999/10, Pacific Earthquake Engineering Research Center, University of California, Berkeley, California, 95-106.
  12. Gurley, C. (2012), "Progressive collapse and earthquake resistance", Pract. Period. Struct. Des. Constr.- ASCE, 13(1), 19-23.
  13. Hafez, I., Khalil, A. and Mourad, S.A. (2013), "Alternate path method analysis of RC structures using applied element method", Int. J. Protect. Struct., Multi-Science Publishing, 4(1), 45-64. https://doi.org/10.1260/2041-4196.4.1.45
  14. Hajirasouliha, I. and Moghaddam, H. (2009), "New lateral force distribution for seismic design of structures", J. Struct. Eng., 135(8), 906-915. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:8(906)
  15. Haselton, C.B. and Deierlein, G.G. (2007), "Assessment seismic collapse safety of modern reinforced concrete moment frame building", John A. Blume Earthquake Engineering Center Technical Report No. 156, Stanford, California.
  16. Haselton, C.B., Liel, A.B., Lange, S.T. and Deierlein, G.G. (2007), "Beam-column element model calibrated for predicting flexural response leading to global collapse of RC frame buildings", PEER Report 2007/03, Pacific Earthquake Engineering Research Center, College of Engineering University of California,Berkeley.
  17. Haselton, C.B., Liel, A.B. and Deierlein, G.G. (2008), "Simulating structural collapse due to earthquakes: model idealization, model calibration, and numerical solution algorithms", COMPDYN2009, ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Greece.
  18. Hayes, Jr.J.R., Woodson, S.C., Pekelnicky, R.G., Poland, C.D., Corley, W.G. and Sozen, M. (2012), "Can strengthening for earthquake improve blast and progressive collapse resistance?", J. Struct. Eng. - ASCE, 131(8), 1157-1177.
  19. Helmy, H., Salem, H. and Mourad, S. (2012), "Progressive collapse assessment of framed reinforced concrete structures according to UFC guidelines for alternative path method", Eng.Struct., 42, 127-141. https://doi.org/10.1016/j.engstruct.2012.03.058
  20. Hosseini, M. and Khoshahmadi, A. (2008), "A more realistic lateral load pattern for design of reinforced conceret buildings with moment frames and shear walls", 2008 Seismic Engineering Conference Commemorating the 1908 Messina and Reggio Calabria Earthquake. 2008 American Institute of Physics, 1,955-962.
  21. Ibarra, L.F. and Krawinkler, H. (2004), "Global collapse of deteriorating MDOF systems", Proc.13thWorld Conference on Earthquake Engineering, Vancouver, B.C., Canada, August 1-6, Paper No. 116.
  22. Ibarra, L.F. (2005), "Global collapse of frame structures under seismic excitations", Ph.D. thesis, Stanford Univ.
  23. Ibarra, L.F., Medina, R.A. and Krawinkler, H. (2005), "Hysteretic models that incorporate strength and stiffness deterioration", Earthq. Eng. Struct. Dyn, 34, 1489-1511. https://doi.org/10.1002/eqe.495
  24. Kaewkulchai, G. and Williamson, E.B. (2003), "Beam element formulation and solution procedure for dynamic progressive collapse analysis", Comp. Struct., 82(7-8), 639-651.
  25. Karbassi, A. and Nollet, M.J. (2013), "Performance-based seismic vulnerability evaluation of masonry buildings using applied element method in a nonlinear dynamic-based analytical procedure", Earthq. Spectra, 29(2), 399-426. https://doi.org/10.1193/1.4000148
  26. Karimiyan, S., Moghadam, A.S. and Vetr, M.G. (2013), "Seismic progressive collapse assessment of 3-story RC moment resisting buildings with different levels of eccentricity in plan", Earthq. Struct., 5(3), 277-296. https://doi.org/10.12989/eas.2013.5.3.277
  27. Khandelwala, K., El-Tawila, S. and Sadekb, F. (2009), "Progressive collapse analysis of seismically designed steel braced frames", Constr. Steel Res., 65(3), 699-708. https://doi.org/10.1016/j.jcsr.2008.02.007
  28. Khandelwal, K., El-Tawil, S., Kunnath, S. and Lew, H.S. (2012), "Macromodel-based simulation of progressive collapse: steel frame structures", Struct. Eng., 134(7), 1070-1078.
  29. Kim, J. and Hong, S. (2011), "Progressive collapse performance of irregular buildings", Struct. Des. Tall Sp., 20(6), 721-734. https://doi.org/10.1002/tal.575
  30. Kim, J., Choi, H. and Min, K.W. (2011), "Use of rotational friction dampers to enhance seismic and progressive collapse resisting capacity of structures", Struct. Des. Tall Sp., 20(4), 515-537. https://doi.org/10.1002/tal.563
  31. Krawinkler, H., Zareian, F., Lignos, D.G. and Ibarra, L.F. (2009), "Prediction of collapse of structures under earthquake excitations", COMPDYN 2009, ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Greece.
  32. Lew, H.S. (2003), Best practices guidelines for mitigation of building progressive collapse, National Institute of Standards and Technology, Gaithersburg, Maryland, U.S.A, 20899-8611, hsl@nist.gov.
  33. Li, Y., Lu, X.Z., Guan, H. and Ye, L.P. (2011), "An improved tie force method for progressive collapse resistance design of reinforced concrete frame structures", Eng. Struct., 33(10), 2931-2942. https://doi.org/10.1016/j.engstruct.2011.06.017
  34. Lignos, D.G., Zareian, F. and Krawinkler, H. (2008), "Reliability of a 4-story steel moment-resisting frame against collapse due to seismic excitations", ASCE Structures Congress, 1-10.
  35. Lignos, D. and Krawinkler, H. (2012), "Sidesway collapse of deteriorating structural systems under seismic excitations", The John A. Blume Earthquake Engineering Center, Stanford University.
  36. Lignos, D. and Krawinkler, H. (2013), "Development and utilization of structural component databases for performance-based earthquake engineering", J. Struct. Eng., 139, Special Issue: Nees 2: Advances in Earthquake Engineering, 1382-1394. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000646
  37. Lu, X.Z., Lin, X., Ma, Y., Li, Y. and Ye, L. (2008), "Numerical simulation for the progressive collapse of concrete building due to earthquake", Proc. the 14th World Conference on Earthquake Engineering, Beijing, China.
  38. Lu, X.Z., Li, Y., Ye, L.P., Ma, Y.F. and Liang, Y. (2008), "Study on the design methods to resist progressive collapse for building structures", Proc. Tenth Int. Symp. On Structural Engineering for Young Experts, 478-483.
  39. Lu, X., Lu, X., Guan, H. and Ye, L. (2013), "Collapse simulation of RC high-rise building induced by extreme earthquakes", Earthq. Eng. Struct. Dyn., 42(5), 705-723. https://doi.org/10.1002/eqe.2240
  40. Li, Y., Lu, X.Z. and Ye, L.P. (2011), "Study on the progressive collapse mechanism of RC frame structures", Build. Sci., 27(5), 12-18.
  41. Masoero, E., Wittel, F., Herrmann, H. and Chiaia, B. (2010), "Progressive collapse mechanisms of brittle and ductile framed structures", J. Eng. Mech., 136(8), 987-995. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000143
  42. Nateghi-A, F. and Parsaeifard, N. (2013), "Studying the effect of initial damage on failure probability of one story steel buildings", Iran. J. Energ. Environ., 4(3), 258-264.
  43. Orton, S. and Kirby, J. (2013), "Dynamic response of a RC frame under column removal", J. Perform. Constr. Facil., 10.1061/(ASCE)CF.1943-5509.0000464.
  44. Panagiotakos, T.B. and Fardis, M.N. (2009), "Deformations of reinforced concrete members at yielding and ultimate", Struct. J., 98(2), 135-148.
  45. Pekau, O.A. and Cui, Y. (2005), "Progressive collapse simulation of precast panel shear walls during earthquakes", Comput. Struct., 84(5-6), 400-412.
  46. Sasani, M., Bazan, M. and Sagiroglu, S. (2007), "Experimental and analytical progressive collapse evaluation of an actual RC structure", Struct. J., 104(6), 731-739.
  47. Sasani, M. and Kropelnicki, J. (2008), "Progressive collapse analysis of an RC structure", Struct. Des. Tall Sp., 17(4), 757-771. https://doi.org/10.1002/tal.375
  48. Sasani, M. and Sagiroglu, S. (2008), "Progressive collapse resistance of hotel San Diego", J. Struct. Eng., 134(3), 478-488. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:3(478)
  49. Sasani, M. and Sagiroglu, S. (2008), "Progressive collapse of RC structures: a multihazard perspective", Struct. J., 105(1), 96-103.
  50. Somes, N.F. (1973), "Abnormal loading on buildings and progressive collapse", in Building Practices for Disaster Mitigation (Wright, Kramer and Culver, eds.), Build. Sci., Series No. 46, National Bureau of Standards, Washington, DC.
  51. Stinger, S. and Orton, S. (2013), "Experimental evaluation of disproportionate collapse resistance in RC frames", ACI Struct. J., 110(3), 521.
  52. Talaat, M. and Mosalam, K.M. (2009), "Modeling progressive collapse in reinforced concrete buildings using direct element removal", Earthq. Eng. Struct. Dyn., 38, 609-634. https://doi.org/10.1002/eqe.898
  53. Tsai,M.H. and Lin, B.H. (2008),"Investigation of progressive collapse resistance and inelastic response for an earthquake-resistant RC building subjected to column failure", J. Eng. Struct., 30(12), 3619-3628. https://doi.org/10.1016/j.engstruct.2008.05.031
  54. Zareian, F., Lignos, D.G. and Krawinkler, H. (2009), "Quantification of modeling uncertainties for collapse assessment of structural systems under seismic excitations", COMPDYN 2009, ECCOMAS Thematic Conference on, Computational Methods in Structural Dynamics and Earthquake Engineering, Greece.
  55. Zareian, F. and Medina, R.A. (2010), "A practical method for proper modeling of structural damping in inelastic plane structural systems", J. Comput. Struct., 88, 45-53. https://doi.org/10.1016/j.compstruc.2009.08.001

피인용 문헌

  1. Ratio of Torsion (ROT): An index for assessing the global induced torsion in plan irregular buildings vol.9, pp.1, 2015, https://doi.org/10.12989/eas.2015.9.1.145
  2. Effect of base isolation systems on increasing the resistance of structures subjected to progressive collapse vol.9, pp.3, 2015, https://doi.org/10.12989/eas.2015.9.3.639
  3. Earthquake induced torsion in buildings: critical review and state of the art vol.8, pp.2, 2015, https://doi.org/10.12989/eas.2015.8.2.305
  4. Progressive collapse vulnerability in 6-Story RC symmetric and asymmetric buildings under earthquake loads vol.6, pp.5, 2014, https://doi.org/10.12989/eas.2014.6.5.473
  5. Evaluation of Collapse Distribution in Three-Story RC Moment-Resisting Asymmetric Buildings due to Earthquake Loads vol.15, pp.5, 2017, https://doi.org/10.1007/s40999-017-0197-4
  6. Seismic Behavior of Horizontally Irregular Structures: Current Wisdom and Challenges Ahead vol.68, pp.6, 2016, https://doi.org/10.1115/1.4034725
  7. Comparison of seismic progressive collapse distribution in low and mid rise RC buildings due to corner and edge columns removal vol.18, pp.5, 2013, https://doi.org/10.12989/eas.2020.18.5.649
  8. Comparison of seismic progressive collapse distribution in low and mid rise RC buildings due to corner and edge columns removal vol.18, pp.6, 2013, https://doi.org/10.12989/eas.2020.18.6.691
  9. Seismic Performance Assessment of an Existing RC Wall Building with Irregular Geometry: A Case-Study of a Hospital in Croatia vol.10, pp.16, 2013, https://doi.org/10.3390/app10165578
  10. Seismic Behavior of Plan and Vertically Irregular Structures: State of Art and Future Challenges vol.22, pp.2, 2013, https://doi.org/10.1061/(asce)nh.1527-6996.0000440