References
- Lee, G.P., Park, Y.T., Choi, S.W., Chang, S.H., Bae, G.J., Kang, T.S., Lee, J.S. (2012), "An experimental study on mechanical behavior of shield segment with high-strength concrete and high-tension rebar", Journal of the Korean Tunnelling Association, Vol. 14, No. 3, pp. 215-230. https://doi.org/10.9711/KTAJ.2012.14.3.215
- Albert, de la F., Pablo, P., Ana, B., Antonio, A. (2012), "Experiences in barcelona with the use of fibres in segmental linings", Tunnelling and Underground Space Technology, Vol. 27, Issue 1, pp. 60-71. https://doi.org/10.1016/j.tust.2011.07.001
- Moon, D.Y., Lee, G.P., Chang, S.H., Bae, G.J. (2011), "Effect of steel fibers on surface resistivity of steel fiber reinforced concrete for shield segment", Journal of the Korean Tunnelling Association, Vol. 13, No. 6, pp. 557-569.
- Kim, B.K., Lee, J.S., Lee, G.P., Chang, S.H., Bae, G.J. (2011), "Mechanical characteristics of high-performance concrete shield segment containing ground granulated blast furnace slag and their improvement by steam curing", Journal of the Korean Tunnelling Association, Vol. 13, No. 3, pp. 233-242.
- Angelo, C., Alberto, M., Zila, R., Paolo, R. (2011), "Structural behaviour of precast tunnel segments in fiber reinforced concrete", Tunnelling and Underground Space Technology, Vol. 26, Issue 2, pp. 284-291. https://doi.org/10.1016/j.tust.2010.10.003
- Shin, J.H., Shin, Y.S., Park, D.I., Chae, S.E., Choi, K.H. (2009), "A study on hydraulic behaviour and leakage control of segment linings using the numerical methods", Journal of the Korean Tunnelling Association, Vol. 11, No. 2, pp. 131-140.
- Bernardino, C., Alessandro, P.F., Paolo, V. (2009), "Combining fiber-reinforced concrete with traditional reinforcement in tunnel linings", Engineering Structures, Vol. 31, Issue 7, pp. 1600-1606. https://doi.org/10.1016/j.engstruct.2009.02.037
- Jeon, J.K., Jeon, C.K., Kim, N.Y., Kim, S.M., Lee, J.E. (2006), "A study on controllong of cracks occurred at crown of tunnel concrete lining using model test", Journal of the Korean Tunnelling Association, Vol. 8, No. 3, pp. 227-235.
- Oh, B.H. (1991), "A theoretical and experimental investigation on the flexural behavior of reinforced concrete members containing steel fibers", Journal of the Korea Concrete Institute, Vol. 3, No. 3, pp. 129-139.
- Lee, G.P., Park, Y.T., Choi, S.W., Chang, S.H., Bae, G.J., Lee, J.S., Kang, T.S. (2012), "Evaluation of high-performance segment by full scale bending test", Proceeding of the 13th KTA international symposium on mechanized tunnelling technology, pp. 93-102.
- Seo, S.Y., Ha, H.S., Lee, S.P. (2011), "Use of steel fiber, macro synthetic fiber and glass fiber in a segmental lining", Proceeding of the 12th KTA international symposium on mechanized tunnelling technology, pp. 123-128.
- Gettu, R., Barragan, B., Garcia, T., Ramos, G., Fernandez C., Oliver, R. (2004), "Steel fiber reinforced concrete for the Barcelona Metro Ling 9 tunnel lining", Proc. of the 6th RILEM Symposium on FRC, Varenna, Italy, RILEM PRO 39, pp. 141-156.
Cited by
- Electromagnetic wave shielding effectiveness of steel fiber reinforced concrete vol.17, pp.2, 2015, https://doi.org/10.9711/KTAJ.2015.17.2.107
- Influence of the joint stiffness on the segment design vol.16, pp.1, 2014, https://doi.org/10.9711/KTAJ.2014.16.1.063
- Design procedure and experimental study on fibre reinforced concrete segmental rings for vertical shafts vol.92, 2016, https://doi.org/10.1016/j.matdes.2015.12.061
- Analysis of segment lining cracking load considering axial force by varying boundary condition vol.16, pp.2, 2014, https://doi.org/10.9711/KTAJ.2014.16.2.173