Abstract
The requirement for the aerodynamic hub drag, allocated from the system requirement of development of a bearingless rotor hub, was analyzed and embodied to be substantiated by the methodology assigned from the requirement. Drag prediction for the initial hub configuration was carried out by hand calculation using aerodynamic drag coefficients and the design change about the sectional shape of torque tube was suggested to satisfy the requirement. Finally, drag prediction was performed for the changed hub configuration by using unstructured overset mesh technique and parallel computation and the calculated result satisfied the requirement of the aerodynamic hub drag. It was found that the drag of final hub configuration was also within the range of drag inferred from the trendline of developed helicopter.
무베어링 로터 허브시스템 개발에서 할당된 공기역학적 허브 항력 요구도를 분석하여, 요구도에서 제시된 방법으로 입증 가능하도록 요구도를 구체화 시켰다. 초기 허브 형상에 대해 공력계수에 기반하여 항력 예측을 수행하였으며, 요구도 충족을 위한 설계 변경안을 제시하였다. 최종 형상에 대해 전산유체기법을 사용하여 항력 예측을 수행하였으며, 그 결과 구체화된 요구도를 만족시킴을 확인할 수 있었다. 또한 기 개발된 헬리콥터의 추세선으로부터 유추할 수 있는 허브 항력의 범위 내에 있음을 확인할 수 있다.