References
- Cao, S., Peng, G. and Yu, Z., 2005, "Hydrodynamic Design of Rotodynamic Pump Impeller for Multiphase Pumping by Combined Approach of Inverse Design and CFD Analysis," ASME J. Fluids Eng., Vol. 127, No. 2, pp. 330-338. https://doi.org/10.1115/1.1881697
- Ding, H., Visser, F. C. and Jiang, Y., 2011, "Demonstration and Validation of a 3D CFD Simulation Tool Predicting Pump Performance and Cavitation for Industrial Applications," ASME J. Fluids Eng., Vol. 133, No. 1, pp. 011101(1-14). https://doi.org/10.1115/1.4003196
- Stepanoff, A.J., 1957, Centrifugal and Axial Flow Pumps, John Wiley.
- Neumann, B., 1991, The Interaction between Geometry and Performance of a Centrifugal Pump, Mechanical Engineering Publications Ltd.
- Kumaresan, T. and Joshi, J. B., 2006, "Effect of Impeller Design on the Flow Pattern and Mixing in Stirred Tanks," Comput. Fluids, Vol. 115, No. 3, pp. 173-193.
- Anagnostopoulos, J. S., 2009, "A Fast Numerical Method for Flow Analysis and Blade Design in Centrifugal Pump Impellers," Comput. Fluids, Vol. 38, No. 2, pp. 284-289. https://doi.org/10.1016/j.compfluid.2008.02.010
- Lee, Y. B., Lee, H. J., Kim, M. S. and Choi, D. H., 2005, "Sequential Approximate Optimization Based on a Pure Quadratic Response Surface Method with Noise Filtering," Trans. of the KSME (A), Vol. 29, No. 6, pp. 842-851. https://doi.org/10.3795/KSME-A.2005.29.6.842
- Baek, S. H., Kim, K. M., Cho, S. S., Jang, D. Y. and Joo, W. S., 2009, "A Sequential Optimization Algorithm Using Metamodel-Based Multilevel Analysis," Trans. of the KSME (A), Vol. 33, No. 9, pp. 892-902. https://doi.org/10.3795/KSME-A.2009.33.9.892
- Queipo, N. V., Verde, A., Pintos, S. and Haftka, R. T., 2009, "Assessing the Value of Another Cycle in Gaussian Process Surrogate-based Optimization," Struct. Multidisc. Optim., Vol. 39, No. 4, pp. 459-475 https://doi.org/10.1007/s00158-008-0346-0
- Yu, Q, Koizumi, N., Yajima, H. and Shiratori, M., 2001, "Optimum Design of Vehicle Frontal Structure and Occupant Restraint System for Crashworthiness (A Multilevel Approach Using SDSS)," JSME Int. J. Ser A, Solid Mech Mater Eng, Vol. 44, No. 4, pp. 594-601. https://doi.org/10.1299/jsmea.44.594
- Baek, S. H., Cho, S. S., Kim, H. S. and Joo, W. S., 2006, "Tarde-off Analysis in Multi-objective Optimization Using Chebyshev Orthogonal Polynomials," J. Mech. Sci. Technol., Vol. 20, No. 3, pp. 366-375. https://doi.org/10.1007/BF02917519
- Baek, S. H., Cho, S. S. and Joo, W. S., 2009, "Response Surface Approximation for Fatigue Life Prediction and Its Application to Multi-Criteria Optimization With a Priori Preference Information," Trans. of the KSME (A), Vol. 33, No. 2, pp. 114-126. https://doi.org/10.3795/KSME-A.2009.33.2.114
- Baek, S.H., Hong, S.H., Cho, S.S., Jang, D.Y. and Joo, W.S., 2010, "Optimization of Process Parameters for Recycling of Mill Scale Using Taguchi Experimental Design," J. Mech. Sci. Technol., Vol. 24, No. 10, pp.2127-2134. https://doi.org/10.1007/s12206-010-0714-8
- ANSYS CFX-12.0, 2010, ANSYS CFX-Solver Theory Guide, ANSYS Inc.
- Barth, T. J. and Jesperson, D. C., 1989, "The Design and Application of Upwind Schemes on Unstructured Meshes," AIAA J., Vol. 89, No. 89-0366, pp. 1-12.
- Menter, F. R., 1994, "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications," AIAA J., Vol. 32, No. 8, pp. 1598-1605. https://doi.org/10.2514/3.12149
- DIN EN ISO 9906, 1999, Rotodynamic Pumps- Hydraulic Performance Acceptance Tests-Grades 1 and 2, International Standardization Organization, Geneva.
- Roache, P. J., 1998, Verification and Validation in Computational Science and Engineering, Hermosa Publishers, Albuquerque, NM.
- Meckesheimer, M., Booker, A. J., Barton, R. R. and Simpson, T. W., 2002, "Computationally Inexpensive Metamodel Assessment Strategies," AIAA J., Vol. 40, No. 10, pp. 2053-2060. https://doi.org/10.2514/2.1538
- More, J. J. and Wright, S. J., 1993, Optimization Software Guide, SIAM Publications, Philadelphia.
- ANSYS, 2007, Release 11.0 Documentation, SAS IP, Inc.
- Gautschi, W., 1996, Orthogonal Polynomials: Applications and Computations, Acta Numerica, Cambrige University Press.
- Park, S. H., 1996, Robust Design and Analysis for Quality Engineering, Chapman & Hall, London.
Cited by
- Performance and Internal Flow Characteristics of an Axial Flow Pump for a Floating Type Water Treatment System vol.17, pp.3, 2014, https://doi.org/10.5293/kfma.2014.17.3.052
- A Study on the Design for the Air Impeller of a Finishing Tool Unit vol.20, pp.3, 2015, https://doi.org/10.7315/CADCAM.2015.312
- Swarm intelligence based on modified PSO algorithm for the optimization of axial-flow pump impeller vol.29, pp.11, 2015, https://doi.org/10.1007/s12206-015-1034-9
- Development of Drainage Pump for Rescue Sinking Ship vol.39, pp.3, 2015, https://doi.org/10.5916/jkosme.2015.39.3.248
- Design Optimization of Two-Way Pump Casing through Flow Analysis vol.31, pp.2, 2018, https://doi.org/10.7734/COSEIK.2018.31.2.79