참고문헌
- L. Germanisher, 2003, Rules and regulations, IV - Non-marine, Part 1 -Wind Energy, Regulation for the certification of the Wind Energy Conversion Systems, Germanischer Lloyd, Hamburg, Chapter 1-11.
- S. H. Cho, S. I. Kim, Y. C. Yoo, 1998, The EF Fects of Deformation Variables on Hot Workability of Austenitic Stainless Steel, Met. Mater. Int., Vol. 4, No. 4, pp. 732-736. https://doi.org/10.1007/BF03026389
- E. J. Jung, J. T. Yeom, J. H. Kim, D. G. Lee , N. K. Park, C. S. Lee, 2006, Evaluation of High Temperature Workability of A350 LF2 using the Deformation Processing Map, Trans. Mater. Process., Vol.15, No.4, pp. 333-339. https://doi.org/10.5228/KSPP.2006.15.4.333
- Y. V. R. K. Prasad, T. Seshacharyulu, 1998, Modelling of Hot Deformation for Microstructural Control, Int. Mater. Rev., Vol. 43, No. 6, pp. 243-258. https://doi.org/10.1179/095066098790105618
- C. I. Garcia, G. D Wang, D. E. Camus, E. A. Loria, A. J. EdArdo, 1994, Hot Deformation Behavior of Superalloy 718, The Minerals, metals & Materials Society, TMS, USA, pp. 293-302.
- H. Ziegler, 1963, Progress in Solid Mechanics, John Wiley and Sons. New York, NY, Vol. 4, p. 93.
- F. Ozturk, D. Lee, 2004, Analysis of Forming Limits Using Ductile Fracture Criteria, J. Mater. Process. Technol., Vol. 147, No. 3, pp. 397-404. https://doi.org/10.1016/j.jmatprotec.2004.01.014
- J. T. Yeom, Y. S. Na, 2002, Assessment of Hot Deformation and Grain Size Distribution in a Udimet 720Li Pancake, Trans. Mater. Process., Vol. 11, No. 6, pp. 538-546. https://doi.org/10.5228/KSPP.2002.11.6.538
- J. T. Yeom, N. K. Park, C. S. Lee, 2004, Manufacturing Technology of High-Quality Superalloy Alloy 718 Billet, Trans. Mater. Process., Vol. 13, No. 8, pp. 653-662. https://doi.org/10.5228/KSPP.2004.13.8.653
- J. Y. An, Y. J. Kwon, D. L. Lee, S. I. Kim, Y. C. Yoo, 2005, Modeling of Flow Stress and Micro-Structural Variations in Strain Induced Dynamic Transformation of Low Carbon Steel by Hot Torsion Deformation, J. Kor. Inst. Met. Mater., Vol. 43, No. 11, pp. 740-743.
- N. K. Park, J. T. Yeom, Y. S. Na, 2002, Characterization of Deformation Stability in Hot Forging of Conventional Ti-6Al-4V Using Processing Maps, J. Mater. Process. Technol., Vol. 130-131, pp. 540-545. https://doi.org/10.1016/S0924-0136(02)00801-4
- D. H. Kim, H. M. Kim, N. K. Park, 1992, Deformation Behavior of Superalloy 718 under Compression Load, J. Kor. Inst. Met. Mater., Vol. 30, No. 11, pp. 1393-1400.