DOI QR코드

DOI QR Code

Vibration and Noise Analysis for Rotary Compressor in Medium-to-high Frequency Ranges

중고주파수 대역의 회전형 압축기 진동소음 해석

  • Kwon, Hyun-Wung (Seoul National University Naval Architecture and Ocean Engineering) ;
  • Song, Jee-Hun (Chonnam National University Department of Naval Architecture & Ocean Engineering) ;
  • Hong, Suk-Yoon (Seoul National University Naval Architecture and Ocean Engineering) ;
  • Hwa, Jong-Hun (LG Electronics Inc.)
  • Received : 2012.03.07
  • Accepted : 2012.09.27
  • Published : 2012.11.20

Abstract

Power flow analysis(PFA) is introduced for solving the noise and vibration analysis of system structures in medium-to-high frequency ranges. The vibration analysis software, $PFADS_{C++}$ R4 based on power flow finite element method(PFFEM) and the noise prediction software, $NASPFA_{C++}$ R1 based on power flow boundary element method(PFBEM) are developed. In this paper, the coupled PFFE/PFBE method is used to investigate the vibration and radiated noise of the rotary compressor. PFFEM is employed to analyze the vibrational responses of the rotary compressor, and PFBEM is applied to analyze the radiation noise around rotary compressor. The vibrational energy of the structure is used as an acoustic intensity boundary condition of PFBEM. Numerical simulations are presented for the rotary compressor, and reliable results have been obtained.

Keywords

References

  1. Belov, V. D., Rybak, S. A. and Tartakovskii, B. D., 1977, Propagation of Vibrational Energy in Absorbing Structures, J. Soviet Physics Acoustics, Vol. 23, No. 1, pp. 115-119.
  2. Nefske, D. J. and Sung, S. H., 1989, Power Flow Finite Element Analysis of Dynamic Systems : Basic Theory and Application to Beams, Journal of Vibration, Acoustics, Stress and Reliability in Design, Vol. 111, No. 1, pp. 94-100. https://doi.org/10.1115/1.3269830
  3. Bouthier, O. M. and Bernhard, R. J., 1995, Simple Models of the Energetics of Transversely Vibrating Plates, Journal of Sound and Vibration, Vol. 182, No. 1, pp. 149-164. https://doi.org/10.1006/jsvi.1995.0187
  4. Bouthier, O. M. and Bernhard, R. J., 1995, Simple Models of Energy Flow in Vibrating Membranes, Journal of Sound and Vibration, Vol. 182, No. 1, pp. 129-147. https://doi.org/10.1006/jsvi.1995.0186
  5. Park, D.-H., Hong, S.-Y., Kil, H.-G. and Jeon, J.-J., 2001, Power Flow Model and Analysis of In-plane Waves in Finite Coupled Thin Plates, Journal of Sound and Vibration, Vol. 244, No. 4, pp. 651-668. https://doi.org/10.1006/jsvi.2000.3517
  6. Seo, S.-H., Hong, S.-Y. and Kil, H.-G., 2003, Power Flow Analysis of Reinforced Beam-plate Coupled Structures, Journal of Sound and Vibration, Vol. 259, No. 5, pp. 1109-1129. https://doi.org/10.1006/jsvi.2002.5118
  7. Lee, H.-W., Hong, S.-Y., Park, D.-H. and Kwon, H.-W., 2008, Energy Flow Boundary Element Method for Vibration Analysis of One and Two Dimension Structures, Shock and Vibration, Vol. 15, No. 1, pp. 33-50. https://doi.org/10.1155/2008/607379
  8. Wohlever, J. C. and Bernhard, R. J., 1973, Mechanical Energy Flow Models of Rods and Beams, Journal of Sound and Vibration, Vol. 153, No. 1, pp. 1-19.
  9. Cremer, L., Heckl, M. and Ungar, E. E., 1988, Structure-borne Sound, Springer-Verlay, New York.
  10. Fahy, F., 1985, Sound and Structural Vibration : Radiation, Transmission and Response, Academic Press.
  11. Song, J.-H. and Hong, S.-Y., 2008, Development of Compliant and Dissipative Joints in Coupled Thin Plates for Vibrational Energy Flow Analysis, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 18, No. 10, pp. 1082-1090. https://doi.org/10.5050/KSNVN.2008.18.10.1082
  12. Hwang, D.-W., Hong, S.-Y., Seo, S.-H. and Kwon, H.-W., 2007, Transient Power Flow Analysis of Beam and Plate, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 17, No. 7, pp. 624-631. https://doi.org/10.5050/KSNVN.2007.17.7.624
  13. Lee, J.-Y., Kil, H.-G., Song, J.-H. and Hong, S.-Y., 2009, Power Flow Analysis of Vibration of a Plate Covered with a Damping Sheet, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 19, No. 5, pp. 530-536. https://doi.org/10.5050/KSNVN.2009.19.5.530
  14. Kim, S.-H., Hong, S.-Y., Kil, H.-G. and Song, J.-H., 2010, Vibro-acoustic Analysis of Adjoined Two Rooms Using 3-D Power Flow Finite Element Method, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 20, No. 1, pp. 74-82. https://doi.org/10.5050/KSNVE.2010.20.1.074
  15. Lee, U.-Y., Kim, B.-J. and Lee, J.-S., 2010, Design Optimization of an Accumulator for Noise Reduction of Rotary Compressor, Transactions of the KSME(A), Vol. 35, No. 7, pp. 759-766. https://doi.org/10.3795/KSME-A.2011.35.7.759