References
- M. Akar and I. Cankaya, "Broken rotor bars fault detection in inverter fed squirrel cage induction motors by using stator current analysis and fuzzy logic," Turkish Journal of Electrical Engineering and Computer Sciences, Vol. 20, No. 1, pp. 1077-1089, 2012.
- S. Seker, "Determination of air-gap eccentricity in electric motors using coherence analysis," IEEE Power Engineering Review, Vol. 20, No. 7, pp. 48-50, Jul. 2000. https://doi.org/10.1109/39.850436
- S. Seker and E. Ayaz, "A reliability model for induction motor ball bearing degradation," Electric Power Components & Systems, Vol. 31, No. 7, pp. 639-52, Jul. 2003. https://doi.org/10.1080/15325000390203656
- E. Ayaz, S. Seker, and A. Ozturk, "Continuous wavelet transform for bearing damage detection in electric motors," in Proceeding of IEEE Melecon, pp. 1130-1133, Spain, 2006.
- E. Ayaz, S. Seker, A. Ozturk, and B. R. Upadhyaya, "Fault detection based on continuous wavelet transform and sensor fusion in electric motors," Compel, Vol. 28, No. 2, pp. 454-70, Mar. 2009. https://doi.org/10.1108/03321640910929326
- S. Nandi, H. A. Toliyat, and X. Li, "Condition monitoring and fault diagnosis of electrical motors - a review," IEEE Trans. Energy Convers., Vol. 20, No. 4, pp.719-729, Dec. 2005. https://doi.org/10.1109/TEC.2005.847955
- S. Seker and E. B. Ayaz, "Feature extraction related to bearing damage in electric motors by wavelet analysis," Journal of the Franklin Institute, Vol. 340, No. 2, pp. 125-134, Mar. 2003. https://doi.org/10.1016/S0016-0032(03)00015-2
- I. Coskun and A. Saygin, "Speed control of induction motor by matrix converter," Gazi University Journal of Science, Vol. 17, No. 2, pp. 63-76, Mar. 2004.
- B. Akin, H. Toliyat, U. Orguner, and M. Rayner, "Low-cost motor drive-embedded fault diagnosis - a simple harmonic analyzer," in Proceeding of APEC, pp. 243-249, U.S.A., 2007.
- R. R. Schoen, and T. G. Habetler, "Evaluation and implementation of a system to eliminate arbitrary load effects in current-based monitoring of induction machines," IEEE Trans. Ind. Appl., Vol. 33 No. 6, pp.1571-1577, Now. 1997. https://doi.org/10.1109/28.649970
- W. T. Thomson, and M. Fenger, "Current signature analysis to detect induction motors faults," IEEE Industry Applications Magazine, Vol. 7 No. 4, pp. 26-34, Jul. 2001. https://doi.org/10.1109/2943.930988
- C. Delmotte-Delforge, H. Henao, G. Ekwe, P. Brochet, and G. A. Capolino, "Comparison of two modeling methods for induction machine study: application to diagnosis," Compel, Vol. 22 No. 4, pp.891-908, Dec. 2003. https://doi.org/10.1108/03321640310482887
- F. Filippetti, M. Martelli, G. Franceschini, and C. Tassoni, "Development of expert system knowledge base to on-line diagnosis of rotor electrical faults of induction motors," in Proceeding of IEEE IAS, Texas, USA, pp. 92-99, 1992.
- K P. olodziejek and E. Bogalecka, "Broken rotor bar impact on sensorless control of induction machine," Compel, Vol. 28, No. 3, pp.540-555, Now. 2009. https://doi.org/10.1108/03321640910940837
- A. Bellini, F. Fillippetti, G. Franceschini, C. Tassoni, and G. Kliman, "Quantitative evaluation of induction motor broken bars by means of electrical signature analysis," IEEE Trans. Ind. Appl., Vol. 37, No. 5, pp. 1248-1255, Sep. 2001. https://doi.org/10.1109/28.952499
- M. Moradian, M. Ebrahimi, M. Danesh, and M. bayat, "Detection of broken bars in induction motors using a neural network," Journal of Power Electronics, Vol. 6, No. 4, pp. 245-252, Jul. 2006.
- J. H. Jung, "Oxidation models of rotor bar and end ring segment to simulate induction motor faults in progress," Journal of Power Electronics, Vol. 11, No. 2, pp. 163-172, Mar. 2011. https://doi.org/10.6113/JPE.2011.11.2.163
- N. H. Kim, W. S. Baik, M. H. Kim, and C.H. Choi, "Rotor fault detection system for the inverter driven induction motor using current signals," Journal of Power Electronics, Vol. 9, No. 2, pp. 224-231, Mar. 2009.
- National Instruments, Sound and Vibration Measurement Suite 2009 Help Manual, part number 372416C-01, Jun. 2009.
- J. R. Blough, "Development and analysis of time variant discrete fourier transform order tracking," Mechanical Systems and Signal Processing, Vol. 17, No. 6, pp.1185-1199, Nov. 2003. https://doi.org/10.1006/mssp.2002.1500
- K. R. Fyfe and D. S. Munck, "Analysis of computed order tracking," Mechanical Systems and Signal Processing, Vol. 11, No. 2, pp. 187-205, Mar. 1997. https://doi.org/10.1006/mssp.1996.0056
- H. Vold, H. Herlufson, M. Mains, R. D. Corwin, "Multi axle order tracking with the vold-kalman tracking filter," Sound and Vibration Magazine, Vol. 13, No. 5, pp. 30-34, 1997.
- M .F. Albright and S. Qian, "A comparison of the newly proposed gabor order tracking technique vs. other order tracking methods," in Proceeding of SAE, No. 2001-01-1471, Apr. 2001.
- N. Mehala and R. Dahiya, "Rotor faults detection in induction motor by wavelet analysis," International Journal of Engineering Science and Technology, Vol.1, No. 3, pp. 90-99, Mar. 2009.
- H Calis and A Cakir, "Rotor bar fault diagnosis in three phase induction motors by monitoring fluctuations of motor current zero crossing instants," Electric Power System Research, Vol. 85, No.5, pp.385-392, Apr. 2006.
- W. T. Thomson and I. D. Stewart, "On-line current monitoring for fault diagnosis in inverter fed induction motors," in Proceeding of 3rd Int. Conf. Power Electronics Drives, pp. 432-435, 1988.
- G. B. Kliman, R. A. Koegl, J. Stein, R. D. Endicott, and M. W. Madden, "Noninvasive detection of broken rotor bars in operating induction motors," IEEE Trans. Energy Convers., Vol. 3, No. 4, pp. 873-879, Dec. 1988. https://doi.org/10.1109/60.9364
- F. Filippetti, G. Franceschini, C. Tassoni, and P. Vas, "Ai techniques in induction machines diagnosis including the speed ripple effect," in Proceeding of IEEE Industry Applications Soc. Annu. Meeting Conf., San Diego, CA, pp. 655-662, 1996.
- N. Elkasabgy, A. R. M. Eastham, and G. E. Dawson, "Detection of broken bars in the cage rotor on an induction machine," IEEE Trans. Ind. Appl., Vol. 22, No. 6, pp. 165-171, Jan. 1992.
- M. Haji and H. A. Toliyat, "Pattern recognition-a technique for induction machines rotor broken bar detection," IEEE Trans. Energy Convers., Vol. 16, No. 4, pp. 312-317, Dec. 2001. https://doi.org/10.1109/60.969469
- B. Ayhan, J. Trussell, and M. Y. Chow, "On the use of a lower sampling rate for broken rotor bar detection with dtft and ar-based spectrum methods," IEEE Transaction on Industrial Electronics, Vol. 55, No. 3, pp.1421-1434, Mar. 2008. https://doi.org/10.1109/TIE.2007.896522
- S. Chen, and R. Zivanovic, "Modeling and simulation of stator and rotor fault conditions in induction machines for testing fault diagnostic techniques," European Transactions on Electrical Power, Vol. 20, No. 5, pp.611-629, Apr. 2009.
- Matlab 2011a, Simpower Systems User's guide, 2011.