한국표면공학회지 (Journal of the Korean institute of surface engineering)

  • 제45권5호
  • /
  • Pages.188-192
  • /
  • 2012
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지
DOI QR코드

DOI QR Code

LTCC를 위한 NiCuZn 페라이트계와 유전체의 이종접합의 특성

The Characteristics of Hetero Junction Using NiCuZn Ferrite and Dielectric for LTCC

  • 김남현 (강원대학교 신소재공학과) ;
  • 박현 (강원대학교 신소재공학과) ;
  • 김경남 (강원대학교 신소재공학과)
  • Kim, Nam Hyun (Department of Advanced Material Engineering, Kangwon National University) ;
  • Park, Hyun (Department of Advanced Material Engineering, Kangwon National University) ;
  • Kim, Kyung Nam (Department of Advanced Material Engineering, Kangwon National University)
  • 투고 : 2012.10.22
  • 심사 : 2012.10.30
  • 발행 : 2012.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The hetero junction on dielectrics and ferrite for LTCC was prepared by using NiCuZn ferrite. The shrinkage behaviour of ferrite tapes in combination with a dielectric tape was investigated. The characteristics of NiCuZn ferrite were investigated using XRD (X-ray diffractometer), Dilatometer, FE-SEM (Field emission scanning electron microscope), EDS (Energy dispersive spectrometer). NiCuZn ferrite calcined at $700^{\circ}C$ had a good apparent density and initial permeability of magnetic properties. The shrinkage rate of the NCZF700 ferrite and dielectric material was similar. The multilayer revealed dense, uniform morphologies with excellent interface quality. Diffusion of hetero junction such as dielectric and ferrite was not occuring at $900^{\circ}C$.

키워드

참고문헌

  1. M. H. Nam, H. T. Kim, J. C. Hwang, J. H. Nam, D. H. Yeo, J. H. Kim, S. Nahm, J. Kor. Cera. Soc. 43 (2006) 92. https://doi.org/10.4191/KCERS.2006.43.2.092
  2. J. H. Park, Y. N. Kim, K. H. Song, J. Y. Yoo, J. Kor. Cera. Soc., 39 (2002) 438. https://doi.org/10.4191/KCERS.2002.39.5.438
  3. S. H. Son, H. J. Je, B. H. Kim, J. Kor. Cera. Soc., 36 (1999) 284.
  4. T. T. Ahmed, I. Z. Rahman, M. A Rahman, J. Mater. Process. Tech. 153 (2004) 797 https://doi.org/10.1016/j.jmatprotec.2004.04.188
  5. E. K. Hur, J. S. Kim, J. Kor. Cera. Soc., 40 (2003) 31. https://doi.org/10.4191/KCERS.2003.40.1.031
  6. W. J. Won, H. J. Kin, The Kor. Ins. of Elec. & Elec. Mat. Eng., (2006) 534.
  7. Y. J. Yang, C. J. Sheu, S. Y. Cheng, H. Y. Chang, J. Mag. Mater., 284 (2004) 220. https://doi.org/10.1016/j.jmmm.2004.06.040
  8. B. Li, Z. X. Yue, X. W. Qj, J. Zhou, Z. Gui, L. T. Li, Mater. Sci. Eng. B 99 (2003) 252. https://doi.org/10.1016/S0921-5107(02)00489-0
  9. M. Penchal Reddy, W. Madhuri, G. Balakrishnaiah, N. Ramamanohar Reddy, K. V. Siva Kumar, V. R. K. Murthy, R. Ramakrishna Reddy, Curr. App. Phy., 11 (2011) 191. https://doi.org/10.1016/j.cap.2010.07.005
  10. C. K. Park, K. T. Kim, S. M. Chang, S. R. Lee, J. Eng. Chem., 20 (2009) 500.
  11. J. G. Goh, J. Kor. Mag. Soc., 16 (2006) 5.
  12. Y. J. Choi, J. H. Park, W. J. Ko, J. H. Park, S. Nahm, J. G. Park, J. Kor. Mat. Res., 14 (2004).
  13. M. Hagymasi, A. Roosen, R. Karmazin, O. Dernovsek, W. Haas, J. Euro. Ceram. Soc., 25 (2005) 2061. https://doi.org/10.1016/j.jeurceramsoc.2005.03.011