DOI QR코드

DOI QR Code

Proposal of Estimation Equation for Nominal Strength of Longitudinal Fillet Welds with Different Types of Steel

강종에 따른 종방향 필릿용접부 공칭강도 계산식의 제안

  • 조재병 (경기대학교, 토목공학과) ;
  • 이혜영 (경기대학교, 토목공학과)
  • Received : 2012.06.22
  • Accepted : 2012.09.25
  • Published : 2012.10.27

Abstract

High performance, high strength steels were developed and used in steel structures recently. Since the newly developed high strength steels posses different toughness, weldability, yield strength ratio, etc. in compare with conventional structural steels, it is requred to investigate the applicability of the design strength of fillet weld specified in the existing design codes. The comparison of the design strengths of various codes from domestic and overseas shows quite a difference. Test results for fillet weld strengths were collected and statistically analysed. Each of yield strength, tensile strength of parent material and tensile strength of weld metal was selected as a main parameter for each estimation equation respectively. All the estimation equations yield almost same values for each type of steel regardless the type of main parameter selected. Considering the behaviour of fillet welded joints and for practical purposes, it is proposed that the equation with tensile strength of parent material is to be used in design codes. The comparison with the proposed nominal strengths of fillet welds shows that the existing design codes could lead to an uneconomical result for low strength steels and lie on an unsafe side for high strength steels.

최근 고성능, 고강도 강재가 개발되어 강구조물에 많이 사용되고 있다. 새로 개발된 고강도 구조용 강재는 일반적인 강도의 강재에 비하여 인성, 용접성, 항복강도비 등이 다르므로 필릿용접부에 대해 기존 설계기준의 적용 타당성을 검토할 필요가 있다. 국내외의 설계기준에 따른 필릿용접부의 공칭강도 값을 비교한 결과 상당한 차이가 있음을 확인하였다. 필릿용접부 강도시험 결과를 수집 분석하였다. 필릿용접의 강도를 결정하는 주요변수로 모재의 항복강도와 인장강도, 그리고 용접금속의 인장강도를 각각 선택하여 강도 추정식을 도출하였다. 공칭강도 추정식을 사용하여 각 강종별로 구한 계산 값은, 선택한 주요변수의 종류와 관계없이 거의 동일한 것으로 나타났다. 필릿용접부의 거동특성과 설계의 실용성을 고려하여 모재의 인장강도를 기준으로 공칭강도를 산정하는 것이 좋을 것으로 판단된다. 제안된 공칭강도와 비교한 결과 기존의 설계기준에 따른 필릿용접부의 공칭강도는 낮은 강도의 강재에 대해서는 비경제적이고, 고강도 강재의 경우에는 적절한 안전성을 확보하지 못할 우려가 있다.

Keywords

References

  1. 국토해양부(2010) 도로교설계기준, 한국도로교통협회. MLTM (2010) Design standard of highway bridge, Korea Road & Transportation Association (in Korean).
  2. 국토해양부(2011) 철도설계기준, 한국철도시설공단. MLTM (2011) Design criteria for railroad Korea rail network authority (in Korean).
  3. 조재병, 정경섭, 이정우(2006) 모재의 두께와 용접치수에 따른 필릿용접부의 강도, 한국강구조학회 논문집, 한국강구조학회, 제18권, 제3호, pp.331-337. Jo, J.B., Jung, K.S., and Lee, J.W. (2006) Effects of plate thickness and weld size on the strength of fillet welded Lap Joints, Journal of Korean Society of Steel Construction, KSSC, Vol. 18, No. 3, pp.331-337 (in Korean).
  4. 최선규, 유정한, 이강민, 박재우(2012) 비보강받침접합의 용접강도와 설계도표, 한국강구조학회논문집, 한국강구조학회, 제24권, 제2호, pp.199-206. Choi, S.K., Yu, J.H., Lee, K.M., and Park, J.W. (2012) The Weld strength and design tables for the unstiffened seated connections, Journal of Korean Society of Steel Construction, KSSC, Vol. 24, No. 2, pp.199-206 (in Korean). https://doi.org/10.7781/kjoss.2012.24.2.199
  5. 국토해양부(2012) 도로교설계기준, 한국도로교통협회. MLTM (2012) Design standard of highway bridge, Korea Road & Transportation Association (in Korean).
  6. AISC (2010) Specification for Structural Steel Buildings, American Institute of Steel Construction, USA.
  7. CSA (2000) Canadian Highway Bridege Design Code, Canadian Standards Association, Canada.
  8. DIN (1990) DIN 18800 Teil 1 : Steel structures ; design and construction, 1990 Deutsches Institut fur Normung e. V., Berlin (in German)
  9. EC3 (2003) Eurocode 3: Design of Steel Structures, Part 1.8, Design of joints, EN 1993-1-8, European Committee for Standardization, Brussels.
  10. Collin, P. and Johansson B. (2000) Design of welds in high strength steel, Proceedings of 4th European Conference on Steel and Composite Structures, Maastricht, Vol. C, pp.4.10-89-4.10-98, 2005.
  11. Kuhlmann, U., Günther H.P., and Rasche, C. (2008) High strength steel fillet welded connections, Steel Construction, Issue 1, Ernst & Sohn, Berlin, pp.78-84.
  12. Bjork, T., Toivonen, J., and Nykänen, T. (2010) Capacity of fillet welded joints made of ultra high strength steel, Lappeenranta University of Technology, Finland.
  13. Lip H. and Hancock, G.J. (2000) Strength of fillet welded connections in G450 sheet steels, Research Report No. R802, The University of Sydney, Austria.
  14. Bornscheuer, F.W. and Feder, D. (1966) Tests on welded connections with long or thick fillet welds, IIW Doc. XV-214-66, International Institute of Welding, France.
  15. Kato, B. and Manta, K. (1969) The strength of fillet welded joints, IIW Doc. XV-267-69, International Institute of Welding, France.
  16. Miazga, G.S. and Kenndy, D.J.L. (1986) Behaviour of fillet welds as a function of the angles of loading, Structural Engineering Report 133, University of Alberta, Canada.
  17. Bowmann, M.D. and Quin, B.P. (1994) Examination of Fillet Weld strength, Engineering Journal, AISC, Vol. 31, No.3, pp.98-108, American Institute of Steel Construction, USA.
  18. FOSTA (2008) Wirtschaftliche Schweissverbindungen hoherfester Baustahle, Forschung fur die Praxis P652, Verlag und Vertriebsgesellschaft mbH, Dusseldorf. FOSTA (2008) Welded connections of high strength steels for the construction sector, Research for practice P652, Verlag und Vertriebsgesellschaft mbH, Dusseldorf (in German).

Cited by

  1. Strength of Undermatching Fillet Welded Longitudinal Joints of High Strength Steel vol.30, pp.6, 2018, https://doi.org/10.7781/kjoss.2018.30.6.347
  2. 페라이트계 스테인리스강 용접접합부의 모재 블록전단파단에 관한 실험적 연구 vol.28, pp.5, 2012, https://doi.org/10.7781/kjoss.2016.28.5.303
  3. 오스테나이트계 스테인리스강(STS304) 필릿 용접접합부의 모재 블록전단강도에 관한 실험적 연구 vol.33, pp.1, 2012, https://doi.org/10.5659/jaik_sc.2017.33.1.41
  4. Proposal of Transverse Correction Factor for the Calculation of Nominal Strength of Fillet Welded Joints vol.31, pp.3, 2012, https://doi.org/10.7781/kjoss.2019.31.3.163