참고문헌
- Lim, C. H., Suh, Y. S., and Lee, J. S., "An Introduction to the Supercomputer and Its Application to the Computer-Aided Engineering," Trans. of KSME, Vol. 34, pp. 711-719, 1994.
- Zhai, J., Cho, J. R., Jeon, W. J., and Kim, J. H., "The Study for Bead Effect in Inner Case on Thermal Deformation of Refrigerator," J. of the KSPE, Vol. 28, No. 1, pp. 96-101, 2011.
- Kim, S. K., Kim, S. D., and Lim, K., "Vibration Analysis of a Refrigerator Using Component Synthesis Method," J. of KSNVE, Vol. 3, No. 3, pp. 252-257, 1993.
- Tse, F. S., Morse, I. E., and Hinkle, R. T., "Mechanical Vibration Theory and Applications," Allyn and Bacon Inc., 1987.
- Woo, K. and Suh, Y., "Prediction of Effective Properties of Laminated Plain Weave Textile Composites," J. of KSAS, Vol. 31, No. 10, pp. 10-20, 2003. https://doi.org/10.5139/JKSAS.2003.31.10.010
- Lee, J. K. and Kim, J. G., "A Study on Prediction of Effective Material Properties of Composites with Fillers of Different Sizes and Arrangements," J. KSCM, Vol. 18, No. 5, pp. 21-26, 2005.
- Jang, J. J., Yoon, M., and Lee, J., "Computation of Equivalent Material Properties of Woven Fabric Composites Using Homogenization Technique," Trans. of KSME A, Vol. 22, No. 3, pp. 588-594, 1998.
- Jung, J. H. and Choi, J. S., "Equivalent Mechanical Property for Stress Analysis on Lined Pipe," Trans. of KSME A, Vol. 26, No. 3, pp. 445-451, 2002. https://doi.org/10.3795/KSME-A.2002.26.3.445
- Bae, J. D., Cho, J. R., and Ko, W. S., "Derivation of Equivalent Material Properties of Induction Motor Windings Based on Homogenization Method," Trans. of KSME A, Vol. 29, No. 4, pp. 518-525, 2005. https://doi.org/10.3795/KSME-A.2005.29.4.518
- Hill, R., "A Self-consistent Mechanism of Composite Materials," J. Mech. Phys. Solids, Vol. 13, pp. 213-222, 1965. https://doi.org/10.1016/0022-5096(65)90010-4
- Segurado, J., Gonzalez, C., and LLorca, J., "A Numerical Investigation of the Effect of Particle Clustering on the Mechanical Properties of Composites," Acta Materialia, Vol. 51, pp. 2355-2369, 2003. https://doi.org/10.1016/S1359-6454(03)00043-0
- Tlusty, J., Smith, S., and Zamudia, C., "Operation Planning Based on Cutting Process Model," Annals of the CIRP, Vol. 39, No. 2, pp. 517-521, 1990. https://doi.org/10.1016/S0007-8506(07)61110-X
- Born, M. and Wolf, E., "Principles of Optics, 7th ed.," Cambridge University Press, pp. 517-521, 1990.
- Park, S. H., Kim, W.-J., and Lee, B.-Y., "A Study on the Structural Design Approach to Improve Shockproof Characteristic in Cathode Ray Tube," J. of the KSPE, Vol. 17, No. 8, pp. 100-105, 2000.
- Kim, K. W., Kim, N. W., and Kang, D. J., "Analysis of Shadow Mask Thermal Deformation and Prediction of Beam Landing Shifts for Color CRT," IEEE Trans. Consumer Electronics, Vol. 44, No. 2, pp. 442-450, 1998. https://doi.org/10.1109/30.681963
피인용 문헌
- Study of Structural Stiffness of Refrigerator Cabinet Using the Topology Optimization of a Vacuum Insulated Panel (VIP) vol.32, pp.8, 2015, https://doi.org/10.7736/KSPE.2015.32.8.727