Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Shape Optimization of Metal Forming and Forging Products using the Stress Equivalent Static Loads Calculated from a Virtual Model

가상모델로부터 산출된 응력 등가정하중을 이용한 금속 성형품 및 단조품의 형상최적설계

  • Received : 2012.06.25
  • Accepted : 2012.08.13
  • Published : 2012.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

A shape optimization is proposed to obtain the desired final shape of forming and forging products in the manufacturing process. The final shape of a forming product depends on the shape parameters of the initial blank shape. The final shape of a forging product depends on the shape parameters of the billet shape. Shape optimization can be used to determine the shape of the blank and billet to obtain the appropriate final forming and forging products. The equivalent static loads method for non linear static response structural optimization (ESLSO) is used to perform metal forming and forging optimization since nonlinear dynamic analysis is required. Stress equivalent static loads (stress ESLs) are newly defined using a virtual model by redefining the value of the material properties. The examples in this paper show that optimization using the stress ESLs is quite useful and the final shapes of a forming and forging products are identical to the desired shapes.

본 논문은 응력 등가정하중을 이용하여 금속제조공정에서 원하는 성형품과 단조품의 최종형상을 얻기 위한 형상최적화 방법을 제안한다. 성형품의 최종형상은 블랭크의 형상에 따라 달라지고 단조품의 최종형상은 빌렛의 형상에 따라 달라진다. 따라서 원하는 형상의 제품을 얻기 위해 구조최적화방법 중 형상최적화방법을 적용하였다. 금속성형 공정은 비선형 동적해석을 수행하므로 등가정하중법을 이용한다. 등가정하중법 중 가상모델을 이용한 응력 등가정하중은 등가정하중을 산출하는 새로운 방법으로 재료 특성의 가치를 재정의하여 응력 등가정하중을 계산한다. 본 논문에 포함된 예제를 통해 원하는 제품의 최종형상을 얻기 위한 최적의 블랭크 및 빌렛 형상을 도출하여 제안한 방법의 유용성을 검증한다.

Keywords

References

  1. Kalpakjian, S. and Schmid, S. R., 2001, Manufacturing Engineering and Technology, Prentice-Hall, New Jersey, pp. 1-439.
  2. Lee, D. M., 2005, Technology of Plasticity, Munundang, Seoul, pp. 1-577.
  3. Ostwald, P. F. and Munoz, J., 1989, Manufacturing Process and System, John Wiley and Sons, Inc., New York, pp. 1-477.
  4. Keum, Y. T., Kim, J. H. and Choo, B. Y., 2001, "Expert Drawbead Models for Finite Element Analysis of Sheet Metal Forming Processes," International Journal of Solids and Structures, Vol. 38, No. 1, pp. 5335-5353. https://doi.org/10.1016/S0020-7683(00)00342-5
  5. Zhang, W. and Shivpuri, R., 2009, "Probabilistic Design of Aluminum Sheet Drawing for Reduced Risk of Wrinkling and Fracture," Reliability Engineering and System Safety, Vol. 94, No. 2, pp. 152-161. https://doi.org/10.1016/j.ress.2008.02.024
  6. Chengzhi, S., Guanlong, C. and Zhongqin, L., 2005, "Determining the Optimum Variable Blank-Holder Forces Using Adaptive Response Surface Methodology (ARSM)," International Journal of Advanced Manufacturing Technology, Vol. 26, No. 1-2, pp. 23-29. https://doi.org/10.1007/s00170-003-1979-1
  7. Jolgaf, M., Sulaiman, S. B., Ariffin, M. K. A. and Faieza, A. A., 2008, "Closed Die Forging Geometrical Parameters Optimization for AI-MMC," American Journal of Engineering and Applied Science, Vol. 1, No. 1, pp. 1-6. https://doi.org/10.3844/ajeassp.2008.1.6
  8. Guan, J., Wang, G. C., Song, L.B. and Zhao, G. Q., 2009, "The Microstructure Optimization of H-Shape Forgings Based on Preforming Die Design," Materials Science and Engineering A, Vol. 499, No. 1-2, pp. 304-308. https://doi.org/10.1016/j.msea.2007.11.144
  9. Thiyagarajan, N. and Grandhi, R. V., 2005, "Multilevel Design Process for 3-D Preform Shape Optimization in Metal Forming," Journal of Materials Processing Technology, Vol. 170, No. 1-2, pp. 421-429. https://doi.org/10.1016/j.jmatprotec.2005.05.051
  10. Tang, Y. C., Zhou, X. H. and Chen, J., 2008, "Preform Tool Shape Optimization Redesign Based on Neural Network Response Surface Methodology," Journal of Finite Elements in Analysis and Design, Vol. 44, No. 8, pp. 462-471. https://doi.org/10.1016/j.finel.2008.01.007
  11. Shivpuri, R. and Zhang, W., 2009, "Robust Design of Spatially Distributed Friction for Reduced Wrinkling and Thinning Failure in Sheet Drawing," Material and Design, Vol. 30, No. 6, pp. 2043-2055. https://doi.org/10.1016/j.matdes.2008.08.043
  12. Sheriff, N. M. and Ismail, M. M., 2008, "Numerical Design Optimization of Drawbead Position and Experimental Validation of Cup Drawing Process," Journal of Materials Processing Technology, Vol. 206, No. 1-3, pp. 83-91. https://doi.org/10.1016/j.jmatprotec.2007.12.017
  13. Blount, G. N. and Stevens, P. R., 1990, "Blank Shape Analysis for Heavy Gauge Metal Forming," Journal of Materials Processing Technology, Vol. 24, No. 6, pp. 65-74. https://doi.org/10.1016/0924-0136(90)90169-U
  14. Kim, D.H., Lee, J.M, Park, S.H., Yang, D.Y. and Kim, Y.H., 1997, "Blank Design System for Sheet Forming," Journal of the Korean Society for Technology of Plasticity, Vol. 6, No. 5, pp. 400-406.
  15. Lee, C. H. and Huh, H., 1998, "Three Dimensional Multi-step Inverse Analysis for the Optimum Blank Design in Sheet Metal Forming Processes," Journal of Materials Processing Technology, Vol. 80-81, pp. 76-82. https://doi.org/10.1016/S0924-0136(98)00178-2
  16. Lee, C. and Cao, J., 2001, "Shell Element Formulation of Multi-step Inverse Analysis for Axisymmetric Deep Drawing Process," International Journal for Numerical Method in Engineering, Vol. 50, No. 3, pp. 681-706. https://doi.org/10.1002/1097-0207(20010130)50:3<681::AID-NME45>3.0.CO;2-M
  17. Park, G. J., 2007, Analytical Methods for Design Practice, Springer, Berlin, 255-310.
  18. Kim, Y. I. and Park, G. J., 2010, "Nonlinear Dynamic Response Structural Optimization using Equivalent Static Loads," Comput. Methods Appl. Mech. Engrg., Vol. 199, No. 9/12, pp. 660-676. https://doi.org/10.1016/j.cma.2009.10.014
  19. Shin, M. K., Park, K. J. and Park, G. J., 2007, "Optimization of Structures with Nonlinear Behavior Using Equivalent Loads," Comput. Methods Appl. Mech. Engrg., Vol. 196, No.4, pp. 1154-1167. https://doi.org/10.1016/j.cma.2006.09.001
  20. Lee, J. J. and Park, G. J., 2011, "Shape Optimization of the Initial Blank in the Sheet Metal Forming Process Using Equivalent Static Loads," Int. J. Numer. Meth. Engng., Vol. 85, No. 2, pp. 247-268. https://doi.org/10.1002/nme.2969
  21. Jung, U. J., Lee, J. J. and Park, G. J., 2011, "A Preliminary Study on the Optimal Shape Design of the Axisymmetric Forging Component using Equivalent Static Loads," Trans. of KSME (A), Vol. 35, No. 1, pp. 1-10.
  22. LS-DYNA User's Manual Version 971, 2007, Livermore Software Technology Corporation.
  23. MD NASTRAN 2010 User's Guide, 2010, MSC Software Corporation.

Cited by

  1. Optimization of the Television Packing System Using Equivalent Static Loads vol.39, pp.3, 2015, https://doi.org/10.3795/KSME-A.2015.39.3.311
  2. Preliminary Study on Optimization of the Tube Hydroforming Process Using the Equivalent Static Loads vol.39, pp.3, 2015, https://doi.org/10.3795/KSME-A.2015.39.3.259