References
- Anderson DA, Kennedy TW, 1993. Development of SHRP Binder Specification. Journal of the Association of Asphalt Paving Technologists. Vol. 64, 481-507.
- Andrew J. Hanz, Zelalem A. Arega, Hussain U. Bahia, 2009. Rheological Evaluation of Emulsion Residues Recovered Using Newly Proposed Evaporative Technique, Transportation Research Board
- Angelo DJ, Kluttz R, Dongre RN, 2007. Revision of the Superpave High Temperature Binder Specification: The Multiple Stress Creep Recovery Test. Journal of the Association of Asphalt Paving Technologists. 123-162.
- Airey GD, BROWN S, 1998. Rheological Performance of Aged Polyer Modified Bitumens. Journal of the Association of Asphalt Paving Technologists, Vol. 67. 66-100.
- AASHTO TP 70. 2009. Standard Method of Test for Multiple Stress Creep Recovery(MSCR) Test of Asphalt Binder Using a Dynamic Shear Rehometer (DSR).
- AASHTO TP 70. 2009. Standard Method of Test for Multiple Stress Creep Recovery(MSCR) Test of Asphalt Binder Using a Dynamic Shear Rehometer (DSR). AASHTO 2009.
- Bahia HU, Anderson DA, Christensen DW, 1992. The Bending Beam Rheometer; A Simple Device for Measuring Low-Temperature Rheology of Asphalt Binders. Journal of the Association of Asphalt Paving Technologists, Vol. 61. 117-153.
- Gibson NH., Schwartz CW, Schapery RA., Witczak MW, 2003. Viscoelastic, Viscoplastic, and Damage Modeling of Asphalt Concrete in Unconfined Compression. Transportation Research Record. Vol. 1860. 3-15. https://doi.org/10.3141/1860-01
- Ho KS., 2006. Unified Constitutive Equations of Viscoplastic Deformation: Development and Capabilities. International Journal of Japan Society Mecahnical Engineering. Vol. 49. 138-146.
- Kim YR, Chehab G., 2004. Development of Viscoelastic Continuum Damage Model for Asphalt-Aggregate Mixtures. Arizona State University.
- Krempl E., 1986. Viscoplasticty Based on Overstress with a Differential Growth Law for The Equilibrium Stress. Mechanics of Materials. Vol. 5. 35-48. https://doi.org/10.1016/0167-6636(86)90014-1
- Krempl E. 1987. Models of Viscoplasticity-Some Comments on Equilibrium (Back) Stress and Drag Stress. Acta Mech, Vol. 69. 25-42. https://doi.org/10.1007/BF01175712
- Krempl E, Khan F., 2003. Rate(Time)-Dependent Deformation Behavior: an Overview of Some Properties of Metal and Solid Polymers. International Journal of Plasticity. Vol. 19. 1069-1095. https://doi.org/10.1016/S0749-6419(03)00002-0
- Masad EA, Huang CW, DAngelo J, Little DN., 2009. Characterization of Asphalt Binder Resistance to Permanent Deformation Based on Nonlinear Viscoelastic Analysis of Multiple Stress Creep Recovery (MSCR) Test. Journal of the Association of Asphalt Paving Technologists, Vol. 78. 535-566.
- Nader Tabatabaee, Hassan Ali Tabatabaee, 2010. Multiple Stress Creep and Recovery Time Sweep Fatigue Test: Crumb Rubber Modified Binder and Mixture Performance, Transportation Research Board.
- Perzyna P. "Thermodynamic Theory of Viscoplasticity." Advances in Applied Mechanics 1971; 11; 313-354. https://doi.org/10.1016/S0065-2156(08)70345-4
- Prager W. A New Method of Analyzing Stresses and Strains in Work Hardening Plastic Solids. Journal of Applied Mechanics 1956; 23;. 493-496.
- Rowe GM, Sharrock MJ, Bouldin MG, .Dongre RN, 2001. Advanced Techniques to Develop Asphalt Master Curves From The Bending Beam Rheometer. Petroleum and Coal, Vol. 43. 54-59.
- Schapery RA. 1961. A Simple Collocation Method for Fitting Viscoelastic Models to Experimental Data. California Institute of Technology, Pasadena CA.
- Uzan J. 1996. Asphalt Concrete Characterization for Pavement Performance Prediction. Journal of the Association of Asphalt Paving Technologists. Vol. 65. 573-607.
- Yun T, Underwood BS, Kim YR., 2010. Time-Temperature Superposition for HMA with Growing Damage and Permanent Strain in Confined Tesion and Compression. Journal of Materials in Civil Engineering, Vol. 22. 415-422. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000039
- Yun T., Eum BS., Yoo PJ., Performance Evaluation of Polymer Modifed Asphalt Binder with PG Testing Protocols. Journal of Korean Society of Road Engineers (Accepted).