References
- Lewis, F. L., Abdallah, C. T. and Dawson, D. M., 1993, Control of Robotic Manipulators, MacMillan.
- Lawrence, D. A., 1993, Stability and Transparency in Bileteral Teleoperation, IEEE Trans. Robot and Automation, Vol. 9, No. 5, pp. 624-637. https://doi.org/10.1109/70.258054
- Chopra, N., Spong, M., Ortega, R. and Barabanov, N. E., 2004, On Position Tracking in Bilateral Teleoperation, Proc. of the 2004 American Control Conference, Boston, pp. 5244-5249.
- Gang, G. and Furusho, J., 2000, Speed Control of Two-Inertia System by PI/PID Control, IEEE. Trans. Industrial Electronics, Vol. 47, No. 3, pp. 603-609. https://doi.org/10.1109/41.847901
- Kang, M. S., Yoon, W. H. and Lee, J. B., 2011, LOS Stabilization Control of OTM Antenna Driven by Geared Flexible Transmission, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 21, No. 10, pp. 951-959. https://doi.org/10.5050/KSNVE.2011.21.10.951
- Zhang, G. and Furusho, J., 2000, Speed Control of Two-inertia System by PI/PID Control, IEEE Trans. on Industrial Electronics, Vol. 47, No. 3, pp. 603-609. https://doi.org/10.1109/41.847901
- Szabat, K. and Orlowsak-Kowalska, T., 2007, Vibration Suppression in a Two-mass Drive System Using PI Speed Controller and Additional Feedbackcomparative Study, IEEE Trans. on Industrial Electronics, Vol. 54, No. 2, pp. 1193-1205. https://doi.org/10.1109/TIE.2007.892608
- Yuki, K., Murakami, T. and Ohnishi, K., 1999, Vibration Control of 2-mass Resonant System by Resonant Ratio Control, IEEE Trans. on Industrial Electronics, Vol. 46, No.1, pp. 162-168. https://doi.org/10.1109/41.744407
- Kasura, S. and Ohnishi, K., 2007, Force Servoing by Flexible Manipulator Based on Resonant Ratio Control, IEEE Trans. on Industrial Electronics, Vol. 54, No. 1, pp. 539-547. https://doi.org/10.1109/TIE.2006.888805
- Ji, K. I. and Sul, S. K., 1995, Kalman Filter and LQ Based Speed Control for Torsional Vibration Suppression in a 2-mass Motor Drive System, IEEE Trans. on Industrial Electronics, Vol. 42, No. 6, pp. 564-571. https://doi.org/10.1109/41.475496
- Beineke, S., Schutte, F. and Grotstollen, H. 1997, Comparison of Methods for State Estimation and On-line Identification in Speed and Position Control Loops, Proc. 7-th EPE, pp. 364-369.
- Pan, Y. R., Shih, Y. T., Horng, R. H. and Lee, A. C., 2009, Advanced Parameter Identification for a Linear-motor-driven Motion System Using Disturbance Observer, Int. J. of Precision Engineering and Manufacturing, Vol. 10, No. 4, pp. 35-47. https://doi.org/10.1007/s12541-009-0069-1
- Edward, C. and Spurgeon, S. K., 1998, Sliding Mode Control Theory and Application, Taylor & Francis Ltd.
- Utkin, V. I., Guldner, J. and Shi, J., 1999, Sliding Mode Control in Electromechanical Systems, New-York : Taylor & Francis.
- Young, D. K., Utkin, V. I. and Ozguner, A., 1999, Control Engineer's Guide to Sliding Mode Control, IEEE Trans. on Control Systems Technology, Vol. 7, No. 3, pp. 328-342. https://doi.org/10.1109/87.761053
- Kawamura, A., Itoh, H., and Sakamoto, K., 1994, Chattering Reduction of Disturbance Observer Based Sliding Mode Control. IEEE Trans. Ind. Application, Vol. 41, No. pp. 456-461.
- Hace, A., Jezernik, K. and Sabanovic, A., 2007, SMC with Disturbance Observer for a Linear Belt Drive, IEEE Trans. on Industrial Electronics, Vol. 54, No. 6, pp. 3402-3412. https://doi.org/10.1109/TIE.2007.906130
- Hace, A., Jezernik, K. and Sabanovic, A., 2005, Improved Design of VSS Controlller for a Linear Belt-driven Servomechanism, IEEE/ASME Trans. On Mechatronics, Vol. 10, No. 4, pp. 385-389. https://doi.org/10.1109/TMECH.2005.852448