Journal of the Korea Institute of Building Construction (한국건축시공학회지)

The Korean Institute of Building Construction (한국건축시공학회)
권호 표지
DOI QR코드

DOI QR Code

An Experimental Study on the Thermal Performance of Cement Mortar with Granulated PCM

  • Jeong, You-Gun (Department of architectural engineering, Han Yang University, Erica) ;
  • Park, Ki-Bong (Department of architectural engineering, Kang Won University) ;
  • Lee, Han-Seung (Department of architectural engineering, Han Yang University, Erica)
  • Received : 2012.06.14
  • Accepted : 2012.08.29
  • Published : 2012.10.20
Download PDF
⟨ Previous Next ⟩

Abstract

In this study the thermal performance of G-PCM replaced for find aggregate in mortar specimens was evaluated using TG-DTA. As a result, it was found that when solid changed into liquid, it absorbed heat, and when liquid changed into solid, it radiated heat. In addition, the fluidity and the compressive strength of mortar with G-PCM can be applied to the floor mortar and a wall finish material. Also the higher the replacement ratio, the larger the latent heat capacity. It was found that the mortar with G-PCM slowed the increase and decrease of temperature. Thus, the duration of pleasant indoor temperature is extended by the floor and wall mortar with G-PCM. In conclusion, G-PCM is expected to reduce the heating energy consumption.

Keywords

References

  1. Hyun EM. Environment-friendly building study on reduction of $CO_{2}$ emission [dissertation]. Seoul (Korea): Kon-kuk University; 2009. 65 p.
  2. Choi SJ, Lee DK, Park SE. Policy movement analysis in and out of Korea on $CO_{2}$ reduction and process technology development. technique innovation society special issue. 2003;6(4):535-50.
  3. Kim SS, Choi CY, Lee JG. PCM heat storage construction materials heating energy saving property. Korea equipment engineering society scientific announcement meeting thesis journal. 2007 Jun;19(6):1102-7.
  4. Kim JG, Yoon WS, Cheong KT, Seol YG, Joo HK, Jun MS, Lee TG. Study on manufacture and capsulation of global PCM particle. HWAHAK KONGHAK. 1999 Jun;37(2):151-7.
  5. Lee JK. A study on the heat storage and transportation with microencapsulated Phase Change Material. Korea institute of energy research; 2000 Sep. 31 p. Report No.:KIER-99-6812-5
  6. Go JS, Kim BY, Park SW. An Experimental Study on the Heat Storage Properties of Phase Change Material Using Paraffin Sheets in Building. Journal of the Korea Institute of Building Construction. 2011 Oct;11(5):435-41. https://doi.org/10.5345/JKIBC.2011.11.5.435
  7. Kpschenz, M. and Lehmann, B. Development of a Thermally Activated Celling Panel with PCM for Application in Lightweight and Retrofitted Building. Energy and Building. 2004 Aug;36(1):121-6.
  8. Ryu HW, Woo SW, Shin BC, Kim SD. Prevention of Supercooling and Stabilization of Inorganic Salt Hydrates as Latent Heat Storage Materials. Solar Energy Materials and Solar Cells. 1992 Feb;27(2):161-72. https://doi.org/10.1016/0927-0248(92)90117-8
  9. Seo BH. Educational materials of green building specialist training. Yongin (Korea): Energy Management Corporation; 2011. 24 p.
  10. Kim BH, Lee HS. A study on thermal performance of cement mortar with PCM. Journal of the Korea Concrete Institute. 2011 Aug;23(4):521-8. https://doi.org/10.4334/JKCI.2011.23.4.521
  11. Marco S. Phase Change Materials latent heat storage for in terior climate control. Germany: The chemical company BASF; 2007 Feb. 26 p. Report No.:12968_02.