International Journal of Naval Architecture and Ocean Engineering

  • 제4권3호
  • /
  • Pages.291-301
  • /
  • 2012
  • /
  • 2092-6782(pISSN)
  • /
  • 2092-6790(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

Estimation of geometry-based manufacturing cost of complex offshore structures in early design stage

  • Nam, Jong-Ho (Division of Naval Architecture and Ocean Systems Engineering, Korea Maritime University) ;
  • Sohn, Se-Hwan (Division of Naval Architecture and Ocean Systems Engineering, Korea Maritime University) ;
  • Singer, David J. (Department of Naval Architecture and Marine Engineering, University of Michigan)
  • 발행 : 2012.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A scalar metric for the assessment of hull surface producibility was known to be useful in estimating the complexity of a hull form of ships or large offshore structures by looking at their shape. However, it could not serve as a comprehensive measuring tool due to its lack of important components of the hull form such as longitudinals, stiffeners, and web frames attached to the hull surface. To have a complete metric for cost estimation, these structural members must be included. In this paper, major inner structural members are considered by measuring the complexity of their geometric shape. The final scalar metric thus consists of the classes containing inner members with various curvature magnitudes as well as the classes containing curved plates with single and double curvature distribution. Those two distinct metrics are merged into a complete scalar metric that accounts for the total cost estimation of complex structural bodies.

키워드

참고문헌

  1. Caprace, J. and Rigo, P., 2012. Towards a short time "feature-based costing" for ship design. Journal of Marine Science and Technology, 17(2), pp.216-230. https://doi.org/10.1007/s00773-012-0163-4
  2. Farin, G.E., 2002. Curves and surfaces for CAGD - A practical guide. 5th ed. Academic Press.
  3. Farouki, R., 2008. Pythagorean-hodograph curves: algebra and geometry inseparable. Springer.
  4. Lamb, T., 1994. Shell plate definition guide for ship designers. Report 0421 National Shipbuilding Research Program.
  5. Lamb, T., 1995. Shell development computer aided lofting: Is there a problem or not?. Journal of Ship Production, 11(1), pp.34-46.
  6. Millman, R. and Parker, G., 1977. Elements of differential geometry. New Jersey: Prentice-Hall.
  7. Parsons, M.G., Nam, J.H. and Singer, D.J., 1999. A scalar metric for assessing the producibility of a hull form in early design. Journal of Ship Production, 15(2), pp.91-102.
  8. Rigterink, D. and Singer, D.J., 2009. An assessment of producibility of a stiffened hull plate in early design stage. Conference on computer applications and information technology in the maritime industries. 1, pp.564-575.
  9. Rigterink, D., Collette, M. and Singer, D.J., 2012. A novel structural complexity metric and its impact on structural cost estimating. International marine design conference.
  10. Shin, J.G., Kim, Y.G. and Nam, J.H., 2004. An integrated approach to determine optimal process information of large-scale line heating process with deformation simulation. Journal of Ship Production, 20(4), pp.211-220.
  11. Shin, J.G., Ryu, C.H. and Nam, J.H., 2004. A comprehensive line heating algorithm for automatic formation of curved shell plates. Journal of Ship Production, 20(2), pp.69-78.
  12. Struik, D., 1961. Lectures on classical differential geometry. New York: Dover Publications.