초록
IEEE 802.15.4 Zigbee 네트워크와 같은 USNs(Ubiquitous Sensor Networks)은 ISM(Industrial, Scientific, and Medical) 주파수 대역을 WiFi 네트워크와 공동으로 사용을 하고 있다. 동일 지역 내에서 두 개의 네트워크가 동작하게 되면 주파수가 겹침으로 인하여 패킷 충돌이 발생 할 수 있다. 이를 확인하기 위해 WiFi와 ZigBee 통신 네트워크을 한 지역에 설치하여 실험을 수행하였다. 실험결과 WiFi 와 ZigBee 간 주파수 간섭으로 인해 데이터 전송률이 저하됨을 확인하였다. 이러한 문제점을 해결하기 위해 주파수 충돌회피 알고리즘을 제안한다. 이 알고리즘에서는 주파수 충돌이 감지되면 각 노드에 다른 주파수를 갖는 새로운 통신 채널을 할당한다. 제안된 주파수 충돌 회피 알고리즘의 성능을 평가하고 결과를 기술하였다.
USNs (Ubiquitous Sensor Networks) such as IEEE 802.15.4 ZigBee network share ISM (Industrial, Scientific, and Medical) frequency band with WiFi networks. Once both networks operate in a region, packet collision may happen because of frequency overlapping. To assure this possibility, we conducted experiments where WiFi and ZigBee communication networks had been installed in an area. As a result of the test, successful data transmission rate were reduced due to the frequency overlapping between a WiFi communication channel and a ZigBee communication band. To cope with this problem, we propose a collision avoidance algorithm. In the proposed algorithm, if frequency collision is sensed, new communication channel with different frequency band is allocated to each node. Performance of the proposed frequency collision avoidance algorithm was tested and the results were described.