Acknowledgement
Supported by : 한국산업기술진흥원
References
- T. A. Osswald, L.-S. Turng, and P. J. Gramann, Injection Molding Handbook, Hanser, Munich, 2001.
- M.-Y. Lyu and H.-Y. Kim, Polymer Science and Technology, 20, 157 (2009).
- M.-Y. Lyu, J.-H. Mo, and W.-J. Jeong, Elastomers and Composites, 38, 295 (2003).
- J. H. Mo and M.-Y. Lyu, Transact. Mater. Proc., 13, 515 (2004). https://doi.org/10.5228/KSPP.2004.13.6.515
- J. S. Hong, S. R. Park, and M.-Y. Lyu, Polymer(Korea), 35, 1 (2011).
- K. Park, J.-H. Ahn, and C.-H. Yim, KSME, 27, 507 (2003). https://doi.org/10.3795/KSME-A.2003.27.4.507
- S. J. Liao, D. Y. Chang, H. J. Chen, L. S. Tsou, J. R. Ho, H. T. Yau, and W. H. Hsieh, Polym. Eng. Sci., 44, 917 (2004). https://doi.org/10.1002/pen.20083
- H. Oktem, T. Erzurumlu, and I. Uzman, Mater. Design, 28, 1271 (2007). https://doi.org/10.1016/j.matdes.2005.12.013
- M.-A. Kang and M.-Y. Lyu, Polymer(Korea), 32, 502 (2008).
- Z. Lu and K. F. Zhang, Polym. Eng. Sci., 49, 1661 (2009). https://doi.org/10.1002/pen.21167
- P. Larpsuriyakul and H.-G. Fritz, Polym. Eng. Sci., 51, 411 (2011). https://doi.org/10.1002/pen.21849
- M. Lee, J. H. Kim, S. R. Park, and M.-Y. Lyu, Elastomers and Composites, 44, 373 (2009).
Cited by
- Design of Runner System and Prediction of Moving Distance of the Screw for the Improvement of Formability of a Housing Part of Small-Size Air Cleaner vol.33, pp.12, 2016, https://doi.org/10.7736/KSPE.2016.33.12.1021
- Observation of Two-Dimensional Shaped Aluminum Flake Orientation During Injection Molding and Its Orientation Mechanism pp.2092-7673, 2019, https://doi.org/10.1007/s13233-019-7097-1
- 유리섬유 강화 폴리카보네이트의 환상형상부품 사출성형시 성형수축에 관한 연구 vol.48, pp.4, 2012, https://doi.org/10.7473/ec.2013.48.4.300
- Analysis of Cavity Pressure and Dimension of Molded Part According to V/P Switchover Position in Injection Molding vol.52, pp.4, 2017, https://doi.org/10.7473/ec.2017.52.4.309
- Analysis of the Physical Quantity Variation in the Cavity and the Quality of the Molded Product According to the Injection Speed in Injection Molding vol.52, pp.4, 2012, https://doi.org/10.7473/ec.2017.52.4.317
- 나일론66/탄소필러 복합체의 가공조제에 따른 물성 및 용융흐름특성 연구 vol.42, pp.3, 2012, https://doi.org/10.7317/pk.2018.42.3.478
- Effect of warpage on the operation of a rapid cooling and heating device vol.41, pp.8, 2012, https://doi.org/10.1007/s40430-019-1806-8