References
- Rhim, S. and Park, J. H., "Residual Vibration Control of High Speed Take-out Robot Used for Handling of Injection Mold Plastic Part," J. of the KSPE, Vol. 28, No. 9, pp. 1025-1031, 2011.
- Tasy, D. M. and Lin, C. F., "Asymmetrical inputs for minimizing residual response," IEEE International Conference on Mechatronics, pp. 235-240, 2005.
- Rew, K. H. and Kim, K. S., "Using Asymmetric SCurve Profile for Fast and Vibrationless Motion," International Conference on Control, Automation, and Systems, pp. 500-504, 2007.
- Meckl, P. H., Arestides, P. B., and Woods, M. C., "Optimized S-Curve Motion Profiles for Minimum Residual Vibration," American Control Conference, pp. 2627-2631, 1998.
- Dijkstra, B. G., Rambaratsingh, N. J., Scherer, C., Bosgra, O. H., Steinbuch, M., and Kerssemakers, S., "Input design for optimal discrete time Point-to-Point motion of an industrial XY-positioning table," IEEE Conference on Decision and Control, pp. 901-906, 2000.
- Masey, R. J. M., Gray, J. O., Dodd, T. J., and Caldwell, D. G., "Elliptical Point to Point Trajectory Planning using Electronic Cam Motion Profile for High Speed Industrial Pick and Place Robots," IEEE Conference on Emerging Technologies & Factory Automation, 2009.
- Kim, D. N., Ng, T. C., and Chen, I. M., "On Algorithms for Planning S-curve Motion Profiles," International Journal of Advanced Robotic Systems, Vol. 5, No. 1, pp. 99-106, 2008.
- Kim, J. H., "Control of Linear Motor using DSP," Dong-Il Pub., 2003.
- Li, H., Le, M. D., Gong, Z. M., and Lin, W., "Motion Profile Design to Reduce Residual Vibration of High- Speed Positioning Stages," IEEE/ASME Transactions on Mechatronics, Vol. 14, No. 2, pp. 264-269, 2009. https://doi.org/10.1109/TMECH.2008.2012160
- Lim, J. G., Yoon, W. S., Beom, H. R., and Hong, S. W., "A Study on Suppression of Lateral Vibration for Axially Deploying Beams under Gravity," J. of the KSPE, Vol. 28, No. 8, pp. 959-965, 2011.
Cited by
- Improvement of Vibration Performance for Wafer Transfer Robot using Frequency Analysis of Motion Profile vol.31, pp.8, 2014, https://doi.org/10.7736/KSPE.2014.31.8.697
- A Study on Motion Acceleration-Deceleration Time to Suppress Residual Vibration of Robot vol.12, pp.3, 2017, https://doi.org/10.7746/jkros.2017.12.3.279
- Analysis of Embedded Prefilters in Motion Profiles vol.65, pp.2, 2018, https://doi.org/10.1109/TIE.2017.2726959