참고문헌
- 박용명, 전명희, 이건준, 김철환(2011) 인장하중을 받는 중대형급 선설치 앵커볼트의 콘크리트파괴강도 평가를 위한 연구, 한국강구조학회논문집, 한국강구조학회, 제23권, 제4호, pp.493-501.
- 장정범, 서용표, 이종림(2003) 직매형 앵커기초의 설계기준 개선에 관한 연구, 대한토목학회논문집, 대한토목학회, 제23권, 제6A호, pp.1331-1338.
- 한국수력원자력(주)(2004) 원전 주요 기기 지지용 매입앵커의 거동성능 및 설계기준 수립에 대한 연구, 최종보고서.
- 한국콘크리트학회(2007) 콘크리트구조설계기준해설, 부록 IV 콘크리트용 앵커, pp.462-494.
- ACI Committee 318 (2002) Building Code Requirements for Structural Concrete (ACI 318-02) and Commentary (ACI 318R-02); Appendix D Anchoring to Concrete, American Concrete Institute, pp.399-426.
- ACI Committee 318 (2008) Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary; Appendix D Anchoring to Concrete, American Concrete Institute, pp.409-438.
- ACI Committee 349 (1990) Code Requirements for Nuclear Safety Related Concrete Structures(ACI 349-90); Appendix B Steel Embedments, American Concrete Institute, pp.80-86.
- ACI Committee 349 (2001) Code Requirements for Nuclear Safety Related Concrete Structures(ACI 349-01); Appendix B Anchoring to Concrete, American Concrete Institute, pp.81-88.
- ASTM E 488-96 (Reapproved 2003) Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements, An American National Standards.
- Eligehausen, R., Mallee, R., and Silva, J.F. (2006) Anchorage in Concrete Construction, Ernst &Sohn, Germany.
- Fuchs, W., Eligehausen, R., and Breen J.E. (1995) Concrete Capacity Design(CCD) Approach for Fastenings to Concrete, ACI Structural Journal, Vol. 92, No. 6, pp.794-802.
- Klingner, R.E., Muratli, H., and Shirvani, M. (1999) A Technical Basis for Revision to Anchorage Criteria, NUREG CR-5563, U.S. Nuclear Regulatory Commission.
- Muratli, H., Klingner, R.E., and Graves III, H.L. (2004) Breakout Capacity of Anchors in Concrete-Part 2: Shear, ACI Structural Journal, Vol. 101, No. 6, pp.821-829.
피인용 문헌
- Simplified Finite Element Model of an Anchor Bolt Inserted Through Concretes Considering Clamping Forces vol.26, pp.4, 2013, https://doi.org/10.7734/COSEIK.2013.26.4.293
- Shear Resistance of CIP Anchors under Dynamic Loading: Unreinforced Anchor vol.26, pp.1, 2014, https://doi.org/10.7781/kjoss.2014.26.1.011
- A Study on the Pull-out Strength of Bond Type Anchors vol.30, pp.2, 2018, https://doi.org/10.7781/kjoss.2018.30.2.105
- 균열콘크리트에 매입된 선설치앵커의 정적 전단하중에 대한 저항강도 vol.27, pp.1, 2015, https://doi.org/10.7781/kjoss.2015.27.1.087
- 지진모의실험에 의한 비균열 및 균열콘크리트에 매입된 비보강 선설치앵커의 전단 저항강도 평가 vol.27, pp.3, 2012, https://doi.org/10.7781/kjoss.2015.27.3.347
- Evaluation of Concrete Breakout Capacity of Single Anchors at Bridge Bearing Connection under Shear Loading vol.20, pp.6, 2012, https://doi.org/10.9798/kosham.2020.20.6.177