초록
본 연구에서는 개구제형 트윈 거더 교량의 곡률에 따른 상부수평브레이싱 부재력 산정식의 적절성 및 적용성을 검토하였다. 이를 위해 3경간 연속교를 대상으로 곡률반경을 50m에서 1,200m로 변화시켜 상부수평브레이싱의 부재력 산정식과 3차원 유한요소해석을 통한 부재력을 비교하였다. 그리하여 상부수평브레이싱의 공칭부재력을 계산할 수 있는 보정계수를 제안하였다. 특히 상부수평브레이싱 수직재 부재력 산정식은 3차원 유한요소해석결과와 잘 부합하지 않는 것으로 나타났는데, 이는 가로보의 유무에 따른 교축직각방향 강성의 영향이라 판단된다. 그리고 사재와 수직재의 휨, 비틀림, 뒤틀림 및 수평분력의 영향을 곡률별로 도식화하여 나타내었다.
A parametric study for varying the radii of curvature is performed with a curved tub girder bridge having three continuous spans. The bracing forces of top lateral bracings from the results of numerical equations are compared to those of 3-dimensional finite element analyses. New modifying factors applicable in computing the nominal member forces of top lateral bracings were suggested. The numerical equations were derived based on one girder system, and it is shown that the numerical equations exhibit some errors compared with 3D FEA results. The main reason for this phenomenon lies on the number of girders. The twin girder system has an external cross-beam between inner and outer girder. It also has larger lateral stiffness than the single girder system. Finally, the distributions by the torsion, bending, distortion, and lateral loading of the top lateral bracing forces were presented in this paper.