참고문헌
- Walters, D. K. and Leylek, J. H., 2000, "A Detailed Analysis of Film-Cooling Physics: Part I-Streamwise Injection With Cylindrical Holes," Journal of Turbomachinery, Vol. 112, pp. 102-112.
- Nasir, H., Ekkad, S. V. and Acharya, S., 2001, "Effect of Compound Angle Injection of Flat Surface Film Cooling with Large Streamwise Injection Angle," Experimental Thermal and Fluid Science, Vol. 25, pp.23-29. https://doi.org/10.1016/S0894-1777(01)00052-8
- Yuen, C. H. N., Martinez-Botas, R. F. and Whitelaw, J. H., 2001, "Film Cooling Effectiveness Downstream of Compound and Fan-shaped Holes," Proceedings of ASME Turbo Expo 2001, 4-7 June, 2001, New Orleans, Louisiana.
- Gritsch, M., Colban, W., Schär, H. and Döbbeling, K., 2005, "Effect of Hole Geometry on the Thermal Performance of Fan-Shaped Film Cooling Holes," Journal of Turbomachinery, Vol. 127, pp. 718-725. https://doi.org/10.1115/1.2019315
- Baheri, S., Alavi Tabrizi, S. P. and Jubran, B. A., 2008, "Film cooling effectiveness from trenched shaped and compound holes," Heat Mass Transfer, Vol. 44, pp. 989-998. https://doi.org/10.1007/s00231-007-0341-9
- Brauckmann, D. and Wolfersdorf, J., 2005, "Influence of Compound Angle on Adiabatic Film Cooling Effectiveness and Heat Transfer Coefficient for a Row of Shaped Film Cooling Holes," Proceedings of GT2005 ASME Turbo Expo 2005: Power for Land, Sea and Air, 6-9 June, 2005, Reno-Tahoe, Nevada, USA.
- Japanese Patent Application No. 332530.
- Kusterer, K., Bohn, D., Sugimoto, T. and Tanaka R., 2006, "Double-jet Ejection of Cooling Air For Improved Film-cooling," Proceedings of GT2006 ASME Turbo Expo 2006: Power for Land, Sea and Air May 8-11, 2006, Barcelona, Spain, GT2006-90854.
- Kusterer, K., Bohn, D., Sugimoto, T. and Tanaka R., 2007, "Influence of Blowing Ratio On The Double-jet Ejection of Cooling Air," Proceedings of GT2007 ASME Turbo Expo 2007: Power for Land, Sea and Air May 14-17, 2007, Montreal, Canada, GT2007-27301.
- Kusterer, K., Elyas, A., Bohn, D., Sugimoto, T. and Tanaka, R., 2008, "Double-jet Film-cooling For Highly Efficient Film-cooling with Low Blowing Ratios," Proceedings of ASME Turbo Expo 2008: Power for Land, Sea and Air GT2008 June 9-13, 2008, Berlin, Germany, GT2008-50073.
- Kusterer, K., Elyas, A. and Bohn, D., 2009, "A Parametric Study On The Influence of The Lateral Ejection Angle of Double-jet Holes On The Film Cooling Effectiveness For High Blowing Ratios," Proceedings of ASME Turbo Expo 2009: Power for Land, Sea and Air GT2009 June 8-12, 2009, Orlando, Florida, USA, GT2009-59321.
- Kusterer, K., Elyas, A. and Bohn, D., 2010, "Film Cooling Effectiveness Comparison Between Shaped and Double Jet Film Cooling Holes In A Row Arrangement," Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air GT2010 June 14-18, 2010, Glasgow, UK, GT2010-22604.
- Wang, Z., Liu, J. J., An, B. T. and Zhang, C., 2011, "Effects of Axial Row-spacing For Double-jet Filmcooling On The Cooling Effectiveness", Proceedings of ASME Turbo Expo 2011 GT2011 June 6-10, 2011, Vancouver, British Columbia, Canada, GT2011-46055.
- CFX-11.0 Solver Theory, Ansys inc., 2006.
- Bardina, J. E., Huang, P. G. and Coakley, T., 1997, "Turbulence Modeling Validation," Fluid Dynamics Conference 28th, AIAA Paper 1997-2121.