DOI QR코드

DOI QR Code

Numerical Study on Various Ribs in a Triangular Internal Cooling Channel

삼각형 내부냉각유로에 설치된 다양한 형태의 리브에 관한 수치해석적 연구

  • 박민정 (인하대학교 대학원 기계공학과) ;
  • 문미애 (인하대학교 대학원 기계공학과) ;
  • 김광용 (인하대학교 기계공학부)
  • Received : 2012.03.27
  • Accepted : 2012.05.07
  • Published : 2012.08.01

Abstract

In this paper, a parametric study on ribs which are installed in an equilateral triangular internal cooling channel is presented. The numerical analysis of the flow structure and heat transfer characteristics is performed using three-dimensional Reynolds-averaged Navier-Stokes equations with the shear stress transport turbulence model. The numerical results are obtained at Reynolds number, 20,000. The parametric study is performed for the parameters, the angle of a rib, rib pitch-to-hydraulic diameter ratio, rib width-to-hydraulic diameter ratio, and rib height-to-hydraulic diameter ratio. The computational results are validated with the experimental data for area-averaged Nusselt number.

Keywords

References

  1. Park J. S., Han J. C., Huang Y. and Ou S., 1992, "Heat Transfer Performance Comparisons of Five Different Rectangular Channels with Parallel Angled Ribs," International Journal of Heat and Mass Transfer, Vol. 35, No. 11, pp. 2891-2903. https://doi.org/10.1016/0017-9310(92)90309-G
  2. Wright L. M., Fu W. L. and Han J. C., 2005, "Influence of Entrance Geometry on Heat Transfer in Rotating Rectangular Cooling Channels (AR=4:1) with Angled Ribs," Journal of Heat Transfer, Vol. 127, Issue. 4, pp. 378-387. https://doi.org/10.1115/1.1860564
  3. Murata A. and Mochizuki S., 2003, "Effect of Cross- Sectional Aspect Ratio on Turbulent Heat Transfer in an Orthogonally Rotating Rectangular Duct with Angled Rib Turbulators," International Journal of Heat and Mass Transfer, Vol. 46, No. 16, pp. 3119-3133. https://doi.org/10.1016/S0017-9310(03)00080-2
  4. Liu Y. H., Huh M., Han J. C. and Chopra S., 2008, "Heat Transfer in a Two-Pass Rectangular Channel (AR=1:4) under High Rotation Numbers," Journal of Heat Transfer, Vol. 130, pp. 081701(1-9). https://doi.org/10.1115/1.2909615
  5. Kim K. Y. and Lee Y. M., 2007, "Design Optimization of Internal Cooling Passage with V-Shaped Ribs," Numerical Heat Transfer, Part A, Vol. 51, pp. 1103-1118. https://doi.org/10.1080/10407780601112860
  6. Lee D. H., Rhee D. H., Cho H. H. and Moon H. K., 2006, "Heat Transfer Measurements in a Rotating Equilateral Triangular Channel with Various Rib Arrangements," Proceedings of ASME Turbo Expo 2006, GT2006-90973.
  7. Liu Y. H., Huh M., Han J. C. and Moon H. K., 2009, "High Rotation Number Effect on Heat Transfer in a Triangular Channel with $45^{\circ}$, Inverted $45^{\circ}$, and $90^{\circ}$Ribs," Proceedings of ASME Turbo Expo 2009, GT2009-59216.
  8. Khalatov A. A., Dashevskyy Y. Y. and Pysmennyi D. M., 2011, "Heat Transfer and Friction Factor in the Rib Roughened Blade Leading Edge Cooling Passage," Proceedings of ASME Turbo Expo 2011, GT2011-45434.
  9. Liu Y. H., Huh M., Rhee D. H., Han J. C. and Moon H. K., 2008, "Heat Transfer in Leading Edge, Triangular Shaped Cooling Channels with Angled Ribs under High Rotation Numbers," Proceedings of ASME Turbo Expo 2008, GT2008-50344.
  10. Ansys CFX-11.0, 2006, Ansys Inc.
  11. Menter F. R. 1994, "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications," AIAA Journal, Vol. 32, pp. 1598-1605. https://doi.org/10.2514/3.12149
  12. Bardina J. E., Huang P. G. and Coakley T., 1997, "Turbulence Modeling Validation," Fluid Dynamics Conference 28th AIAA, pp. 1997-2121.
  13. Dittus F. W. and Boelter L. M., 1930, "Heat Transfer in Automobile Radiatros of The Turbular Type," University of California, Berkeley Publication, Vol. 2, pp. 443-461.
  14. Gee D. L. and Webb R. L., 1980, "Forced Convection Heat Transfer in Helically Rib-Roughened Tubes," International Journal of Heat and Mass Transfer, Vol. 23, pp. 1127-1136. https://doi.org/10.1016/0017-9310(80)90177-5