DOI QR코드

DOI QR Code

Structural monitoring of a wind turbine steel tower - Part I: system description and calibration

  • Rebelo, C. (ISISE, Civil Engineering Department, University of Coimbra) ;
  • Veljkovic, M. (Lulea University of Technology) ;
  • da Silva, L. Simoes (ISISE, Civil Engineering Department, University of Coimbra) ;
  • Simoes, R. (ISISE, Civil Engineering Department, University of Coimbra) ;
  • Henriques, J. (ISISE, Civil Engineering Department, University of Coimbra)
  • 투고 : 2011.03.08
  • 심사 : 2011.08.31
  • 발행 : 2012.07.25

초록

This paper describes the development and calibration of a structural monitoring system installed in a 80 meters high steel wind tower supporting a 2.1 MW turbine Wind Class III IEC2a erected in the central part of Portugal. The several signals are measured at four different levels and include accelerations, strains on the tower wall and inside the connection bolts, inclinations and temperature. In order to correlate measurements with the wind velocity and direction and with the turbine operational parameters the corresponding signals are obtained directly from the turbine own monitoring system and are incorporated in the developed system. Results from the system calibration, the structural identification and the initial period of data acquisition are presented in this paper.

키워드

참고문헌

  1. Adams, D., White, J., Rumsey, M. and Farrar, C. (2011), Structural health monitoring of wind turbines:method and application to a HAWT, Wind Energ., Published online in Wiley Online Library.
  2. Adhikari, S. and Bhattacharya, S. (2011), "Vibrations of wind-turbines considering soil-structure interaction", Wind Struct., 14(2), 85-112. https://doi.org/10.12989/was.2011.14.2.085
  3. Bendat, J.S, and Piersol, A.G. (1993), Engineering application of correlation and spectral analysis, John Wiley & Sons.
  4. Bowles, J.E.(1988), Foundation analysis and design, McGraw-Hill.
  5. Brinker, R., Zhang, L. and Andersen, P. (2000), "Modal identification from ambient response using frequency domain decomposition", Proceedings of the IMAC 18, the international Modal Analysis Conference, San Antonio, TX, USA
  6. Burton, T., Sharpe, D., Jenkins, N. and Bossanyi, E. (2001), Wind energy handbook, John Wiley & Sons.
  7. Chou, Jui Sheng and Tu, Wan Ting (2011), "Failure analysis and risk management of a collapsed large wind turbine tower", Eng. Fail. Anal., 18(1), 295-313. https://doi.org/10.1016/j.engfailanal.2010.09.008
  8. CEN (2005), "EN 1993-1-9: Design of steel structures - Part 1-9: Fatigue", Brussels.
  9. Dally, J.W., Riley, W.F. and McConnell, K.G. (1993), Instrumentation for engineering measurements, 2nd Ed., John Wiley & Sons.
  10. Hau, E. (2006), Wind Turbines: fundamentals, technologies, application, economics, Springer, Berlin.
  11. Kelly, S.G. (2000), Fundamentals of mechanical vibrations, 2nd Ed., McGraw-Hill international.
  12. Lavassas, I., Nikolaidis, G., Zervas, P., Efthimiou, E., Doudoumis, I.N. and Baniotopoulos, C.C. (2003), "Analysis and design of the prototype of a steel 1-MW wind turbine tower", Eng. Struct., 25(8), 1097-1106. https://doi.org/10.1016/S0141-0296(03)00059-2
  13. LUSAS, Element Reference Manual - version 14a, UK.
  14. LUSAS, Modeller Reference Manual - version 14b, UK.
  15. NI-National Instruments (2006), "Labview full development system", version 8.2.
  16. Rebelo, C., Veljkovic, M., Matos, R. and Simoes da Silva, L. (2011), "Structural monitoring of a wind turbine steel tower - Part II: monitoring results", Wind Struct.,
  17. SVS (2007), ARTeMIS Extractor pro, release 4.1, Structural Vibration Solutions, Aalborg, Denmark,
  18. Swartz, R., Lynch, J.P., Zerbst, S., Sweetman, B. and Rolfes, R. (2010), "Structural monitoring of wind turbines using wireless sensor networks", Smart Struct. Syst., 6(3), 183-196. https://doi.org/10.12989/sss.2010.6.3.183
  19. Veljkovic, M. et al. (2012a), High-strength tower in steel for wind turbine, Final Report, RFSR-CT-2006- 00031. Brussels: RFCS publications, European Commission.
  20. Veljkovic, M. et al. (2010b) "Friction connection in tubular towers for wind turbines", Stahlbau, 79(9), 660-668. https://doi.org/10.1002/stab.201001365
  21. Veljkovic, M. et al. (2011), Wind turbine tower design, erection and maintenance, in Wind energy systems: Optimising design and construction for safe and reliable operation (Ed. J.D. Sorensen), Aalborg University and J N Sorensen, Technical University of Denmark, Denmark, Woodhead Publishing Limited, Cambridge, UK.

피인용 문헌

  1. Inflow Parameter Effects on Wind Turbine Tower Cyclic Loading vol.38, pp.5, 2014, https://doi.org/10.1260/0309-524X.38.5.477
  2. Design of Microalloyed Steel for Wind Turbine Towers and Influence of Chemical Composition on Microstructure and Mechanical Properties vol.1143, 2017, https://doi.org/10.4028/www.scientific.net/AMR.1143.32
  3. Numerical investigation on effects of rotor control strategy and wind data on optimal wind turbine blade shape vol.18, pp.2, 2014, https://doi.org/10.12989/was.2014.18.2.195
  4. Structural analysis and optimal design of steel lattice wind turbine towers vol.172, pp.8, 2012, https://doi.org/10.1680/jstbu.18.00074
  5. Flow characteristics and dynamic responses of a parked straight‐bladed vertical axis wind turbine vol.7, pp.5, 2012, https://doi.org/10.1002/ese3.389
  6. A comparison of structural performance enhancement of horizontally and vertically stiffened tubular steel wind turbine towers vol.73, pp.5, 2012, https://doi.org/10.12989/sem.2020.73.5.487
  7. Repowering Steel Tubular Wind Turbine Towers Enhancing them by Internal Stiffening Rings vol.13, pp.7, 2012, https://doi.org/10.3390/en13071538
  8. Lattice and Tubular Steel Wind Turbine Towers. Comparative Structural Investigation vol.13, pp.23, 2012, https://doi.org/10.3390/en13236325