초록
본 연구는 다층지반으로 구성된 방조제의 침투변화에 따른 안정성을 검토하기 위하여 현장조사와 역해석 방법으로 투수계수와 침투수량을 결정하고, 제체의 변형량과 유실량 측정을 위하여 침투모형시험을 수행하여 가장 합리적인 수치해석 방법을 결정하였다. 검토결과 방조제는 다층지반구조물로 투수계수 차이에 의해 바닥보호공과 성토체 경계부에서 유실이 발생하고 이로 인해 방조제의 변형이 발생한다는 것을 예측할 수 있었다. 한편 침투모형 시험에 대한 수치해석결과 한계유속에 의한 방법은 실측치가 해석값보다 작게 나왔으나 그 경향이 유사하여 실제 단면에 적용 가능할 것으로 판단되었다.
The purpose of this study is to decide the permeability and the rate of flow in a way of both site investigation and backward analysis and the most reasonable numerical analysis by performing a seepage model test for measuring the deformation swept volume of the embankment body in order to review a stability of the sea dyke being composed of multi-layers depending on variation of infiltration. As a result of the review, it could be forecasted that sweeping loss would be taken place at the boundary between bed protection works and embankment materials of the sea dyke due to a permeability difference of the multi-layered bed foundation structures and the sea dyke deformation would be occurred as a result thereby. As result of a numerical analysis for the seepage model test, it could be observed that critical velocity method was found to be smaller than the numerical analysis value but its tendency was similar and therefore it was judged that this method could be applied for the actual cross section.