한국통신학회논문지 (The Journal of Korean Institute of Communications and Information Sciences)

  • 제37권8B호
  • /
  • Pages.706-711
  • /
  • 2012
  • /
  • 1226-4717(pISSN)
  • /
  • 2287-3880(eISSN)
한국통신학회 (The Korean Institute of Commucations and Information Sciences)
권호 표지
DOI QR코드

DOI QR Code

이미지 센서 수신부를 이용한 장거리 2×2 MIMO LED 무선 가시광 통신 실험

Experimental Demonstration of Long-reach 2×2 Multiple-Input Multiple-Output (MIMO) Visible Light Communications Using an Image Sensor Receiver

  • 전종배 (경성대학교 전자공학과) ;
  • 김성만 (경성대학교 전자공학과)
  • 투고 : 2012.05.09
  • 심사 : 2012.07.26
  • 발행 : 2012.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

기존의 LED (Light Emitting Diode)를 이용한 가시광 통신방식은 주로 수 m 의 짧은 전송거리와 수백 Mb/s 이하의 낮은 전송속도를 보여왔다. 이를 타개하기 위하여 본 논문에서는 MIMO (Multiple-Input Multiple-Output) 기술을 가시광 통신에 적용하고자 하는 연구를 수행하였다. 빛은 RF 주파수와는 물리적 특성이 다르기 때문에 기존의 RF 주파수에서 사용되던 MIMO 기술의 이론을 그대로 가시광 통신에 적용하기는 힘들다. 따라서, 본 논문에서는 렌즈를 이용하여 물리적으로 광신호를 분리하고, 이미지 센서를 수신기로 사용하여 MIMO 기술을 구현하는 방식을 채택하였다. 본 논문에서는 상용 이미지센서를 이용하여 채널당 200 bit/s의 전송속도 및 전송거리 10.5 m의 장거리 $2{\times}2$ MIMO LED 무선 가시광 통신 실험을 구현하였다.

The current visible light communication (VLC) systems have a short transmission distance and a low data rate. To overcome this, we studied on the method of appling MIMO technology to VLC. However, it is difficult to apply the original MIMO technology used in RF frequency to wireless VLC. In VLC system, a lens can be used to separate the transmitted signals. And, if we use an image sensor as the receiver, MIMO technology can be applied to LED wireless visible light communication. In this paper, we report an experiment of $2{\times}2$ LED wireless visible light communication using a commercial image sensor receiver. We show the experimental demonstration with a transmission length of 10.5 m and a data rate of 200 bit/s.

키워드

참고문헌

  1. Gu. Y., N. Narendran, J.P. Freyssinier, "White LED Performance", 4th International Conference on Solid State Lighting, Proceedings of SPIE 5530, pp.119-124, 2004.
  2. Tae-Keun Kim, "White LED design and implementation", Photonics Conference 2010, Tutorial I, Dec. 2010.
  3. Y. Tanaka, T. Komine, S. Haruyama, M. Nagawa, "Indoor Visible Light Data Transmission System Utilizing White LED Lights", IEICE Trans, on Communications, Vol. E86-B, No. 8, pp.2440-2454, 2003.
  4. Jongbae Jeon, Jungho Choi, Sung-Man Kim, "MAC Protocol Design for Visual Light LAN using LED Light", Journal of Korea Information and Communications Society, Vol. 36, No. 4, pp.391-398, April 2011.
  5. Klaus-Dieter Langer and Jelena Vucic, "Optical Wireless Indoor Networks: Recent Implementation Efforts", European Conference and Exhibition on Optical Communication 2010, paper We.6.B.1, Sep. 2010.
  6. J. Vucic, L. Fernandez, C. Kottke, K. Habel and K.-D. Langer, "Implementation of a Real-Time DMT-based 100 Mbit/s Visible-Light Link", European Conference and Exhibition on Optical Communication 2010, paper We.7.B.1, Sep. 2010.
  7. Kyeong Sun Lim, Sungkeun Baang, Yong Up Lee, "Realization of Non-carrier Visible Light Communication System based upon LED IT", Journal of Korea Information and Communications Society, Vol. 36, No. 9, pp.1117-1125, Sep. 2011. https://doi.org/10.7840/KICS.2011.36B.9.1117
  8. Gwang-Hyun Key, Kyung-Rak Sohn, "A Study on the Duplex Wireless Communications Using LED Lighting", Journal of the Korean Society of Marine Engineering, Vol. 34, No. 6, pp.852-857. Sep. 2010. https://doi.org/10.5916/jkosme.2010.34.6.852
  9. Yeon-Joo Kim, Kyung-Rak Sohn, "A study on the Frequency Modulation-based Audio Transmission System for Short-range Underwater Optical Wireless Communications", Journal of Korea Information and Communications Society, Vol. 36, No. 1, pp.166-171, Jan. 2011. https://doi.org/10.5916/jkosme.2012.36.1.166
  10. "Technical information LED", Hamamatsu, pp. 3-4, Feb. 2007.
  11. "C11288 Driver circuit for CCD Area Image sensor control software", Instruction Manual, Hamamatsu, July 2009.