참고문헌
- 김정년 (1985), 통계학 (증보판), 경문사.
- 김우철, 김재주, 박병욱, 박성현, 송문섭, 이상열, 이영조, 전종우, 조신섭 (2005), 현대 통계학 (제4 개정판), 서울대학교 자연과학대학, 영지문화사.
- Amann F., Button E. A., Evans K. F., Gischig V. S. and Blumel M. (2011), "Experimental Study of the Brittle Behavior of Clay shale in Rapid Unconfined Compression", Rock Mechanics and Rock Engineering, Vol.44, pp.415-430. https://doi.org/10.1007/s00603-011-0156-3
- ASTM (D 7012-07e1), "Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures", Annual Book of ASTM Standards, 2009.
- ASTM (D 2938-95), "Standard test method for unconfined compressive strength of intact rock core specimens", Annual Book of ASTM Standards, 2005.
- ASTM (D 3148-96), "Test method for elastic moduli of intact rock core specimens in uniaxial compression", Annual Book of ASTM Standards, 2005.
- ASTM (D 4543-01), "Practices for preparing rock core specimens and determining dimensional and shape tolerances", Annual Book of ASTM Standards, 2005.
- ISRM (1979), "Suggested methods for determining the uniaxial compressive strength and deformability of rock materials", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol.16(2), pp.135-140.
- Bieniawski Z. T. (1967), "Mechanism of Brittle Fracture of Rock, Part 2-Experimental, Studies", Int. J. of Rock Mech. and Min. Sci., Vol.4, pp.407-423. https://doi.org/10.1016/0148-9062(67)90031-9
- Bieniawski Z. T. (1968), "In Situ Strength and Deformation Characteristics of Coal", Engineering Geology, Vol.2, No.5, pp.325-340. https://doi.org/10.1016/0013-7952(68)90011-2
- Brace W. F., Paulding B. W. & Scholz C. H. (1966), "Dilatancy in the Fracture of Crystalline Rocks", J. Geophys. Res., Vol. 71, pp.3939-53. https://doi.org/10.1029/JZ071i016p03939
- Brace W. F. & Byerlee J. D. (1966), "Regent experimental studies of brittle fracture of rock", Proc., 8th U. S. Symposium on Rock Mechanics, University of Minnesota, pp.58-81.
- Cook N. G. W., Hood M. & Tsai F. (1984), "Observations of crack growth in hard rock loaded by an indenter", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol.21, pp.97-107. https://doi.org/10.1016/0148-9062(84)91177-X
- Diederichs M. S., Kaiser P. K. & Eberhardt E. (2004), "Damage Initiation and Propagation in Hard Rock During Tunnelling and the Influence of Near-Face Stress Rotation", Int. J. of Rock Mech. and Min. Sci., Vol.41, pp.785-812. https://doi.org/10.1016/j.ijrmms.2004.02.003
- Eberhardt E., Stead D. and Stimpson B. (1999), "Quatifying progressive pre-peak brittle fracture damage in rock during uniaxial compression", Int. J. of Rock Mech. and Min. Sci., Vol.36, pp.361-380. https://doi.org/10.1016/S0148-9062(99)00019-4
- Gill D. E., Corthesy R. & M. H. Leite (2005), Determining the minimal number of specimens for laboratory testing of rock properties, Eng. Geol., Vol.78, pp.29-51 https://doi.org/10.1016/j.enggeo.2004.10.005
- Hawkes J. and Mellor M. (1970), "Uniaxial Testing in Rock Mechanics Laboratories", Eng. Geol, Vol.4, pp.177-285.
- ISRM (1979), "Suggested methods for determining the uniaxial compressiv strength and deformability of rock materials", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol.16(2), pp.135-140.
- ISRM (1981), Part 1, "Suggested method for determination of the uniaxial compressive strength of rock materials".
- ISRM (1999), Draft "ISRM suggested method for the complete stress-strain curve for intact rock in uniaxial compression", Int. J. of Rock Mech. and Min. Sci., Vol.36, No.3, pp.279-289. https://doi.org/10.1016/S0148-9062(99)00006-6
- Korinets A. and Alehossein H. (2002), "On the Initial Linearity of Compressive Stress-Strain Curves for Intact Rock", Rock Mechanics and Rock Engineering, Vol.34, No.4, pp.319-328.
- Lau J. S. O. and Chandler N. A. (2004), "Innovative laboratory testing", Int. J. of Rock Mech. and Min. Sci., Vol. 41, pp.1427-1445. https://doi.org/10.1016/j.ijrmms.2004.09.008
- Lajtai E. X. & Nesetova V. (1973), "Fracture from compressive stress concenturations around elastic flaws", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol.10, No.4, pp.265-284. https://doi.org/10.1016/0148-9062(73)90038-7
- Martin C. D. (1997), "The Effect of Cohesion Loss and Stress Path on Brittle Rock Strength", 17th. Canadian Geotechnical Colloquium, Can. Geotech. J., Vol.34, Nov.5, pp.698-725. https://doi.org/10.1139/t97-030
- Paulding B. W. (1966), "Techniques used in studuing the fracture mechanics of rock", Testing Techniques for Rock Mechanics-Am. Soc. Testing Mater., Spec. Tech. Publ., Vol.402, pp.73-84.
- Ray S. K., Sarkar M. and Singh T. N. (1999), "Effect of cyclic loading and strain rate on the mechanical behaviour of sandstone", Int. J. of Rock Mech. and Min. Sci., Vol.36, pp.543-549. https://doi.org/10.1016/S0148-9062(99)00016-9
- Scholz C. H. (1968 a, b), "Mechanism of Creep in Brittle Rock", J. Geophys. Res., Vol.73, No.3, pp.295-302. https://doi.org/10.1029/JA073i001p00295
- Tapponier P. & Brace W. F. (1976), "Development of stress-induced microcracks in Westerly granite", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol.13, pp.103-112. https://doi.org/10.1016/0148-9062(76)91937-9
- Walse, J. B. (1965a), "The effect of Cracks on the Uniaxial Elastic Compression of Rocks", J. Geophys. Res., Vol.70, No.2, pp.399-411. https://doi.org/10.1029/JZ070i002p00399
- Walse J. B. & Brace W. F. (1966a), "Cracks and Pores in Rock", Proc. Congr. Int. Soc. Rock Mech., 1st, Lisbon, Vol. 1, pp. 643-646.
- Walse J. B. & Brace W. F. (1966b), "Elasticity of Rock", Rock Mech. Eng. Geol., Vol.4, No.4, pp.283-297.
- Yamaguchi U. (1970), "The number of test-pieces required to determine the strength of rock", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol.7, No.2, pp.209-227. https://doi.org/10.1016/0148-9062(70)90013-6
- Zhao Z. G. & Cai M. (2010), "A mobilized dilation angle model for rocks", Int. J. of Rock Mech. and Min. Sci., Vol.47, pp.368-384. https://doi.org/10.1016/j.ijrmms.2009.12.007