참고문헌
- 대한건축학회(2009) 2009 KBC: 건축구조기준 및 해설.
- 이철호, 한규홍, 박창희, 김진호, 이승은, 하태휴(2011) 국부좌굴을 고려한 고강도 조립 H형강 부재의 휨성능 실험, 한국강구조학회 논문집, 한국강구조학회, 제23권, 제4호, pp. 417-428.
- 이철호, 김대경, 한규홍, 김진호, 이승은, 하태휴(2012) 고강도 강재 단주의 압축강도 및 잔류응력 평가, 한국강구조학회논문집, 한국강구조학회, 제24권, 제1호, pp.23-34.
- AWS (2010) AWS D1.1/D1.1M-2010 Structural Welding Code-steel, AWS, Miami, FL.
- Bansal, J.P. (1971) The Lateral Instability of continuous Steel Beams, Ph.D. Dissertation, Texas University, Austin, TX.
- Bjorhovde, R. (2004) Development and use of high performance steel, Journal of Constructional Steel Research, Vol. 60, pp.393-400. https://doi.org/10.1016/S0143-974X(03)00118-4
- Galambos, T.V. (1968) Deformation and Energy Absorption Capacity of Steel Structures in the Inelastic Range, AISI Bulletin No. 8.
- Galambos, T.V., Hajjar, J.F. and Earls, C.J. (1997) Required Properties of High-Performance Steels, Report No. NISTIR 6004, NIST.
- Green, P.G. (2000) The Inelastic Behavior of Flexural Members Fabricated from High Performance Steel, Ph.D. Dissertation, Lehigh University, Bethlehem, PA.
- ISO/TR 29381 (2008) Metallic materials-measurement of mechanical properties by an instrumented indentation test- Indentation tensile properties, International Organization for Standardization, Geneva 20, Switzerland
- Kemp, A.R. (1996) Inelastic Local and Lateral Buckling in Design Code, Journal of Structural Engineering, ASCE, Vol. 122, No. 4, pp.374-382. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:4(374)
- Lay, M.G. (1965a) Inelastic Steel Beams under Uniform Moment, Journal of Structural Division, ASCE, Vol. 91, No. ST6, pp.67-93.
- Lay, M.G. (1965b) Flange Local Buckling in Wide-Flange Steel Beams, Journal of Structural Division, ASCE, Vol. 91, No. ST6, pp.95-116.
- Lukey, A.F. and Adams, P.F. (1969) Rotation Capacity Of Beams Under Moment Gradient, Journal of Structural Division, ASCE, Vol. 95, No. ST6, pp.1173-1188.
- McDermott, J.F. (1969) Plastic Bending of A514 Steel Beams, Journal of Structural Division, ASCE, Vol. 95, No. ST9, pp.1851-1871.
- Rasmussen, K.J.R. and Hancock, G.J. (1992) Slenderness Limits for High Strength Steel Sections, Journal of Constructional Steel Research, Vol. 23, pp.73-96. https://doi.org/10.1016/0143-974X(92)90037-F
- Ricles, J.M., Sause, R., and Green, P.S. (1998) High-Strength Steel: Implications of Material and Geometric Characteristics On Inelastic Flexural Behavior, Journal of Engineering Structures, Vol. 20, No. 4-6, pp.323-335. https://doi.org/10.1016/S0141-0296(97)00024-2
피인용 문헌
- Inelastic Buckling Analysis of Frames with Semi-Rigid Joints vol.26, pp.3, 2014, https://doi.org/10.7781/kjoss.2014.26.3.143
- Seismic Performance of High Strength Steel(HSA800) Beam-to-Column Connections with Improved Horizontal Stiffener vol.26, pp.4, 2014, https://doi.org/10.7781/kjoss.2014.26.4.361
- Review of Design Flexural Strengths of Steel–Concrete Composite Beams for Building Structures vol.10, pp.S3, 2016, https://doi.org/10.1007/s40069-016-0146-7
- Effects of flange and web slenderness ratios on elastic flange local buckling of doubly symmetric I-girders vol.17, pp.8, 2016, https://doi.org/10.5762/KAIS.2016.17.8.456
- A Study on Deformation Capacity of High Strength Steel Beam-to-Column Connections According to Welding Detail at Beam End vol.26, pp.4, 2014, https://doi.org/10.7781/kjoss.2014.26.4.335
- Numerical Analysis of Inelastic Lateral Torsional Buckling Strength of HSB800 Steel Plate Girders with Doubly Symmetric Section vol.25, pp.2, 2013, https://doi.org/10.7781/kjoss.2013.25.2.141
- Flange Local Buckling(FLB) for Flexural Strength of Plate Girders with High Performance Steel(HSB 800) vol.26, pp.2, 2014, https://doi.org/10.7781/kjoss.2014.26.2.091
- Numerical Study of High-strength Steel CHS X-joints Including Effects of Chord Stresses vol.30, pp.2, 2018, https://doi.org/10.7781/kjoss.2018.30.2.115
- HSA800 후판재의 완전용입 맞댐용접부 휨-인장강도 실험 vol.26, pp.5, 2014, https://doi.org/10.7781/kjoss.2014.26.5.407