References
- Sellnau, M., Matekunas, F., Battiston, P., Chang, C. and Lancaster, D., 2000, "Cylinder-Pressure-Based Engine Control Using Pressure-Ratio-Management and Low-Cost Non-Intrusive Cylinder Pressure Sensors," SAE Transactions, Vol. 109, pp. 899-918.
- Oh, S., Kim, J., Oh, B., Lee, K. and Sunwoo, M., 2011, "Real-Time IMEP Estimation and Control Using an In-Cylinder Pressure Sensor for a Common-Rail Direct Injection Diesel Engine," Journal of Engineering for Gas Turbines and Power, Vol. 133, pp. 062801-9. https://doi.org/10.1115/1.4002250
- Kim, D., Oh, B., Ok, S., Lee, K. and Sunwoo, M., 2009, "Cylinder Pressure Based Real-Time IMEP Estimation of Diesel Engines," Transaction of the Korean Society of Automotive Engineers, Vol. 17, pp. 118-125.
- Lim, J., Oh, S., Chung, J., Lee, K. and Sunwoo, M. 2010, "Development of a Combustion Phase Indicator for Real-Time Combustion Control in CRDI Diesel Engines," KSAE 2010 Conference paper, pp. 14-19.
- Willems, F., Doosje, E., Engels, F. and Seykens, X., 2010, "Cylinder Pressure-Based Control in Heavy- Duty EGR Diesel Engines Using a Virtual Heat Release and Emission Sensor," SAE Technical Paper 2010-01-0564.
- Yu, S., Song, H., Min, K. and Choi, H., 2011, "Development of Engine Control Using the In- Cylinder Pressure Signal in a High Speed Direct Injection Diesel Engine," SAE Technical Paper 2011- 01-1418.
- Oh, S., Lim, J., Chung, J., Lee, K., Sunwoo, M., Han, K., Yu, J. and Park, S., 2010, "Development of a Combustion Phase Detection Algorithm for Real-time Combustion Control in Common-rail Direct Injection Diesel Engines," KSAE 2010 Conference paper, pp. 291-294.
- Hillion, M., Buhlbuck, H., Chauvin, J. and Petit, N., 2009, "Combustion Control of Diesel Engines Using Injection Timing," SAE Transactions, Vol. 9, p. 0507.
- Schiefer, D., Maennel, R. and Nardoni, W., 2003, "Advantages of Diesel Engine Control Using In- Cylinder Pressure Information for Closed Loop Control," SAE Technical Paper 2003-01-0364, pp. 85-90.
- Koo, T., Yu, S., Choi, H., Min, K., Han, K., Kim, J., Kwon, S. and Cho, S., 2009, "Closed-Loop Control of Main Injection Timing Using MFB50 in Diesel Engine," KSAE 2009 Conference, pp. 299-306.
- Lee, K., Yoon, M., Son, M. and Sunwoo, M., 2006, "Closed-Loop Control of Start of Combustion Using Difference Pressure Management," Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol. 220, pp. 1615-1628. https://doi.org/10.1243/09544070JAUTO189
- Hamedović, H., Raichle, F., Breuninger, J., Fischer, W., Dieterle, W., Klenk, M. and Böhme, J. F., 2005, "IMEP-Estimation and In-Cylinder Pressure Reconstruction for Multicylinder SI-Engine by Combined Processing of Engine Speed and One Cylinder Pressure," SAE Technical Paper 2005-01-0053.
- Jang, J., Lim, B. and Han, B., 1999, "A Study on the Measurement and Extimation of Frictional Loss of CI Engine with IMEP Method," Trans. of the KSME (B), pp. 717-723.
- Heywood, J. B., 1988, Internal Combustion Engine Fundamentals, McGRAW-HILL, Columbus.
Cited by
- Resource-aware integration of AUTOSAR-compliant ECUs with an empirical wcet prediction model vol.17, pp.4, 2016, https://doi.org/10.1007/s12239-016-0071-4
- A Real-Time Combustion Control With Reconstructed In-Cylinder Pressure by Principal Component Analysis for a CRDI Diesel Engine vol.139, pp.6, 2017, https://doi.org/10.1115/1.4035395