DOI QR코드

DOI QR Code

공정 디자인에 따른 클래드강 맞대기 용접부의 기계적 특성에 관한 연구

A Study on the Mechanical Properties of Butt Welding Zone of Clad Steel According to the Process Design

  • 이정현 (볼보 자동차(스웨덴)) ;
  • 박재원 (서울과학기술대학교 NID 융합기술 대학원 나노IT융합 프로그램)
  • 투고 : 2012.03.23
  • 심사 : 2012.04.20
  • 발행 : 2012.08.15

초록

In this study, some considerations have been suggested in developing on-site techniques to evaluate the sensitization of stainless steels. Electrochemical potentiokinetic reactivation (EPR) technique is known to be a candidate tool for field applications since it enables quantitative assessment in reasonable test time, compared to oxalic etching (ditch) technique. The on-site application of the test method imposes additional restrictions on the selection of the test method (for example, minimum surface preparation requirement, insensitivity to testing temperature, etc.). The EPR and etching techniques have been compared in order to sensitization of stainless steel structures. It has been widely reported that the maximum sensitivity in the welded structure of stainless steel is shown at heat-affected zone (HAZ) than weldments with cast structure. In this work, sectioned weldments and external surfaces were investigated to reveal the degree of sensitization by the etching and the results were compared with those of EPR test. The EPR test showed little sensitivity to surface roughness and test temperature.

키워드

참고문헌

  1. Majidi, A. P., and Streicher, M. A., 1984, "The Double Loop Reactivation Method for Detecting Sensitization in AISI 304 Stainless Steels Corrosion," J. Corros. Sci. of Korea, Vol. 40, No. 11, pp. 584.
  2. Aydoggdu, G. H., and Aydinol, M. K., 2006, "Determination of Susceptibility to Intergranular Corrosion and Electrochemical Rectivation Behaviour of AISI 316L Type Stainless Steel Original Research Article," Corros. Sci,. Vol. 48, No. 11, pp. 3565-3583. https://doi.org/10.1016/j.corsci.2006.01.003
  3. Interante, C. G., 1982, "Basic Aspectsof the Problemsof Hydrogenin Steel, Current Solutions to Hydrogen Problemsin Steels," ASM, pp. 3.
  4. Clarke, W. L., and Carlson, D. C., 1980, "Nondestructive Measurement of Sensitization of Stainless Steel: Relation to High Temperature Stress Corossion Behavior," Materials Performance, March, pp. 16-23.
  5. Clarke, W. L., 1981, "The EPR Technique for the Detection of Sensitization in Stainless Steel," General Electric Report, GEAP-24888, April, Available from National Technical Information Service as NUREG/CR-1095, Springfield, Virginia 22161
  6. Clarke, W. L., Kearns, J. R., Park, J. Y., and Rooyen, D. V., 2010, "Standard Electrochemical Potentiodynamic Reactivation (EPR) Test Method for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels," ASTM G 108-94, pp. 8.
  7. Majidi, A. P., and Streicher, M. A., 1984, "The Effect of Methods of Cutting and Grinding on Sensitization of Surface Layers of Type 304 Stainless Steel," Corrosion, Vol. 40, No. 8, pp. 408.
  8. Bell, F. C., and Sonon, D. E., 1976, "Improved Metallographic Etching Techniques for Stainless Steel and for Stainless Steel to Carbon Steel Weldments," Metallography, Vol. 9, No. 2, pp. 91-107 https://doi.org/10.1016/0026-0800(76)90008-2
  9. Liljas, M., 1994, "Proceedings of the Fourths International Conference on Duplex Stainless Steels," Glasgow, Scotland, Keynote Paper V, Vol. 2, pp. 13-16.
  10. Ramiraz, A. J., Lippold, J. C., and Brandi, S. D., 2003, "The Relationship between Chromium Nitride and Secondary Austenite Precipitation in Duplex Stainless Steels," Metallugical and Materials Transaction, Vol. 34A, No 8, pp. 1575-1597.
  11. Streicher, M. A., 1958, "Intergranular Corrosion Resistance of Austenitic Stainless Steels: A Ferric Sulfate-sulfuric Acid Test," ASTM Bulletin, No. 229, pp. 77-86.
  12. Scharfstein, L. R., and Eisenbrown, C. M., 1963, "An Evaluation of Accelerated Strauss Testing," ASTM STP 369, ASTM, pp. 235-239.
  13. Streicher, M. A., 1978, "Theory and Application of Evaluation Tests for Detecting Susceptibility to Intergranular Attack in Stainless Steels and Related Alloys_Problems and Opportunities," Intergranular Corrosion of Stainless Alloys, ASTM STP 656, R. F. Steigerwald ed., ASTM, pp. 3-84.
  14. Na, G. D., Yoo, Y. T., Shin, B. H., and Shin, H. J., 2007, "A Study on the Surface Hardening of SCM4 Steel using a Continuous Wave Nd:YAG Laser," Transaction of KSMTE, Vol. 16, No. 5, pp. 24-32.
  15. Yoo, Y. T., Shin, H. J., and Jang, W. T., 2004, "Surface Heat Treatment of Die Material by Means of CW Nd:YAG Laser," Transaction of KSMTE, Vol. 13, No. 5, pp. 67-74.
  16. Cha, C., Kang, K., Kim, Y., Kim, J., Kim, S., and Yang, I., 2001, "Collapse Characteristics on Width Ratio and Flange Spot-weld Pitch for Hat-shaped Members," Transaction of KSME, Vol. 25, No. 1, pp. 98-105.
  17. Lee, H., Kim, B., and Han, K., 2002, "Energy Absorption Characteristics and Optimal Welding Space of Square Hat Type Thin-walled Tube," Transaction of KSME, Vol. 26, No. 12, pp. 2703-2714.
  18. Park, C. E., Li, C. S., and Kim, I. S., 2003, "Mathematical Models for Optimal Bead Geometry for GMA Welding Process," International Journal of Korea Welding Society, Vol. 3, No. 1, pp. 8-16.
  19. Matsuda, F., Nakagawa, H., Nakata, K., and Ayani, R., 1980, "Effect of Electromagnetic Stirring on Weld Solidification Structure of Aluminum Alloys," Proceedings of the Arc Physics and Weld Pool Behavior, pp. 337-347.
  20. Pearce, B. P., and Kerr, H. W., 1981, "Grain Refinement in Magnetically Stirred GTA Welds of Aluminum Alloys," Metall. Trans. B, Vol. 12, No. 3, pp. 479-486. https://doi.org/10.1007/BF02654317
  21. Mousavi, M. G., Hermans, M. J., and Richardson, I. M., 2003, "Grain Refinement due to Grain Detachment in Electromagnetically Stirred AA7020 Welds," Sci. Technol. Weld. Joining, Vol. 8, No. 4, pp. 309-321. https://doi.org/10.1179/136217103225005462

피인용 문헌

  1. Change of Mechanical Properties of Clad Steel According to the Welding Process Design vol.22, pp.3, 2013, https://doi.org/10.7735/ksmte.2013.22.3.372
  2. Evaluation of Corrosion Resistance and Weldability for the Butt Welding Zone of Hot Rolled Clad Steel Plates vol.31, pp.5, 2013, https://doi.org/10.5781/KWJS.2013.31.5.47
  3. δ-Ferrite Behavior of Butt Weld Zone in Clad Steel Plates Depended on Holding Time of PWHT vol.32, pp.2, 2014, https://doi.org/10.5781/JWJ.2014.32.2.29