DOI QR코드

DOI QR Code

Robust Real-Time Wireless Control Platform Compensating for Packet Loss

패킷 손실에 강인한 원격 실시간 무선제어 플랫폼

  • Received : 2012.05.15
  • Accepted : 2012.06.30
  • Published : 2012.08.01

Abstract

Packet loss compensation techniques are increasingly important to stable remote control over wireless communication in WNCS (Wireless Networked Control Systems). Its time varying channels, limited bandwidth, interference, and poor signal not only leads to packet loss or latency, but also can negatively affect performance and system stability. This paper presents a compensation technique exploiting an EWMA (Exponentially Weighed Moving Average)-based value estimator to clarify the influence of packet loss on the overall WNCS behavior. As an example of actuator to be remotely controlled, a rotary-type inverted pendulum has been considered, and modeled. Performance evaluation results through Matlab/Simulink and Truetime co-simulation confirm the superiority of the proposed value estimation method over previous approaches.

Keywords

References

  1. W. Zhang, M. Branicky, and S. Phillips, "Stability of networked control systems," IEEE Control System Magazine, vol. 21, no. 1, pp. 84-99, Feb. 2001. https://doi.org/10.1109/37.898794
  2. M. Pajic, S. Sundaram, G. Pappas, and R. Mangharam, "The wireless control network: a new approach for control over networks," IEEE Transactions on Automatic Control, vol. 56, no. 10, pp. 2305-2318, 2011. https://doi.org/10.1109/TAC.2011.2163864
  3. J. Stankovic, "When sensor and actuator networks cover the world," ETRI Journal, vol. 30, no. 5, pp. 627-633, Oct. 2008. https://doi.org/10.4218/etrij.08.1308.0099
  4. Y. Ma, W. Chen, and G. Luo, "Compensation of networked control systems with time-delay and data packet losses," Chinese Control and Decision Conference (CCDC'09). IEEE Press, Piscataway, NJ, USA, pp. 5609-5612, 2009.
  5. Y. Wang and G. Yang, "Time delay and packet dropout compensation for networked control systems: a linear estimation method," International Journal of Control, vol. 83, no. 1, pp. 115-124, 2010. https://doi.org/10.1080/00207170903104174
  6. A. Ulusoy, O. Gurbuz, and A. Onat, "Wireless model-based predictive networked control system over cooperative wireless network," IEEE Transactions on Industrial Informatics, vol. 7, no. 1, pp. 41-51, Feb. 2011. https://doi.org/10.1109/TII.2010.2089059
  7. T. Kondo, K. Kobayashi, and M. Katayama, "A wireless cooperative motion control system with mutual use of control signals," Industrial Technology (ICIT), 2011 IEEE International Conference, pp. 33-38, Mar. 2011.
  8. F. Xia, X. Kong, and Z. Xu, "Cyber-physical control over wireless sensor and actuator networks with packet loss," Wireless Networking Based Control, pp. 83-102, 2010.
  9. F. Xia, Y. Tian, Y. Li, and Y. Sung, "Wireless sensor actuator network design for mobile control application," Sensors, vol. 7, no. 10, pp. 2157-2173, 2007. https://doi.org/10.3390/s7102157
  10. M. Andersson, D. Henriksson, and A. Cervin, "Truetime 1.5 - reference manual," Department of Automatic Control, Lund University, Sweden, June 2005.
  11. M. Min, "Design of complementary filter using MEMS-type Gyroscope and accelerometer," Chung-Gang University, 2011.
  12. Y. Zhou, R. Choi, H. Lee, S. Lee, D. Lee, and J. Yoo, "Implementing controller for rotary inverted pendulum based on wireless network," Korea Computer Congress (in Korean), pp. 13-15, Nov. 2011.
  13. N. Patel and S. Jenkins, "Adaptive optimization of run-to-run controllers: the EWMA example," IEEE Transactions on Semiconductor Manufacturing, vol. 13, no. 1, pp. 97-107, Feb. 2000. https://doi.org/10.1109/66.827349
  14. R. Choi, Y. Zhou, H. Lee, S. Lee, D. Lee, and J. Yoo, "A packet loss compensation technique for wireless networked control systems," Fall Conference of the Institute of Embedded Engineering of Korea (in Korean), pp. 89-91, Nov. 2011.

Cited by

  1. Study on Communication Interface of Multiple Smartphones for Unit Control in a PC vol.19, pp.6, 2013, https://doi.org/10.5302/J.ICROS.2013.13.1871