Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

Design Observable Model of Direct Drive Motor for Air Gap Estimation when Input Disturbance is Impulse signal

외란이 충격 신호일 때 공극 추정을 위한 직구동 모터의 관측 가능한 수학적 모델 수립

  • Received : 2012.04.30
  • Accepted : 2012.06.20
  • Published : 2012.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

Observable mathematical model of DDM (Direct Dirve Motor) was suggested. The motor that operates the object system directly is called DDM. DDM has many strong points, however, it has a significant disadvantage, that it is more sensitive to the external force than the motor with reduction gear. In other word, if the force is applied, air gap of the motor can be perturbed. This causes not only difficulty in motor control but also even more serious problem, such as the breakdown of motor. However, if the air gap variation can be estimated, it can help prevent these problems. DDM should be modeled to estimate the air gap variation. The type of researched DDM is PMSM (Permanent Magnet Synchronous Motor) and precedent model of PMSM includes only characteristics of electro-magnetic system and rotational motion. However, suggested model should also include characteristics of translational motion of rotor to estimate the air gap variation. Also, this model should satisfy observability condition, because state observer is designed based on this model.

Keywords

References

  1. S. Komadam, M. Ishida, K. Ohnoshi, and T. Hori, "Disturbance observer-based motion control of direct dirve motors," IEEE Trans. on Energy Conversion, vol. 6, no. 3, pp. 553-559, 1991. https://doi.org/10.1109/60.84334
  2. H. Guldemir, "Detection of airgap eccentricity using line current spectrum of induction motors," Electric Power System Research, vol. 64, no. 2, pp. 109-117, 2003. https://doi.org/10.1016/S0378-7796(02)00154-2
  3. J. R. Cameron, W. T. Thomson, and A. B. Dow, "Vibration and current monitoring for detecting airgap eccentricity in large induction motors," IEE Proceedings, vol. 133, no. 3, pp. 155- 163, 1986. https://doi.org/10.1049/ip-b.1986.0022
  4. R. Dhaouadi, N. Mohan, and L. Norum, "Design and implementation of an extended Kalman filter for the state estimation of a permanent magnet synchronous motor," IEEE Transactions on Power Electronics, vol. 6, no. 3, pp. 491-497, July 1991. https://doi.org/10.1109/63.85891
  5. Z. Chen, M. Tomita, S. Ichikawa, S. Doki, and S. Okuma, "Sensorless control of interior permanent magnet synchronous motor by estimation of an extended electromotive force," IEEE, vol. 3, pp. 1814-1819, 2000.
  6. J. M. Lee, J. B. Son, H. R. Kim, and Y. S. Seo, "PMSM sensorless speed control using a high speed sliding mode observer," Journal of Institute of Control, Robotics and Systems (in Korean), vol. 16, no. 3, pp. 256-263, 2010. https://doi.org/10.5302/J.ICROS.2010.16.3.256
  7. H. Im, H. H. Yoo, and J. Chung, "Dynamic analysis of a BLDC motor with mechanical and electromagnetic interaction due to air gap variation," Journal of Sound and Vibration, vol. 330, no. 8, pp. 1680-1691, 2011. https://doi.org/10.1016/j.jsv.2010.10.024
  8. N. Kazantzis and C. Kravaris, "Nonlinear observer design using Lyapunov's auxiliary theorem," Systems & Control Letters, vol. 34, no. 5, pp. 241-247, 1998. https://doi.org/10.1016/S0167-6911(98)00017-6
  9. J. P. Gauthier and G. Bornard, "Observability for any u(t) of a class of nonlinear systems," IEEE, vol. 26, no. 4, pp. 910-915, 1980.
  10. O. G. Kwon, T. S. Kim, and J. H. Yang, "A new anti-windup method using the linear quadratic observer," Journal of Institute of Control, Robotics and Systems, vol. 16, no. 2, pp. 134-139, 2010. https://doi.org/10.5302/J.ICROS.2010.16.2.134
  11. T. S. Ki, Y. S. Park, and Y. J. Park, "Design observable model of direct drive motor for air gap estimation," Proc. of the 27th ICROS Annual Conference (in Korean), Seoul, Korea, Apr. 2012.