References
- Kang, S. Y., Williams, P. M., McLaren, T. S., and Lee, Y. C., "Studies of thermosonic bonding for flip chip assembly," Materials Chemistry and Physics, Vol. 42, No. 1, pp. 31-37, 1995. https://doi.org/10.1016/0254-0584(95)80039-5
- McLaren, T., Kang, S. Y., Zhang, W., Hellman, D., Ju, T. H., and Lee, Y. C., "Thermosonic flip chip bonding for an 8x8 VCSEL array," Proc. 45th ECTC, pp. 393-400, 1995.
- Jung, H. K., Kwon, W. T., and Yoon, B. O., "Effect of the Tolerance Parameters of the Horn on the Vibration of the Thermosonic Transverse Bonding Flip Chip System," Transactions of the Korean Society of Machine Tool Engineers, Vol. 18, No. 1, pp. 116-121, 2008.
- Choi, M. S. and Lee, D. Y., "Concurrent Optimization of Design and Machining Tolerances with Accumulated Scrap Cost Model(ASCM)," Trans. of the Korean Society of Mechanical Engineers A, Vol. 25, No. 3, pp. 452-460, 2001.
- Jung, H. K., Kwon, W. T., Rhee, G. H., Shim, H. S., Jung, J. H., and Lee, H. W., "Effect of the temperature and the tolerance parameter on the horn of the thermosonic bonding system," Proceeding of the KSMTE Spring Conference, pp. 480-485, 2008.
- Lee, B. C., Moon, J. H., Kang, Y. S., and Yang, D. Y., "A study on the Formability Estimation of Deep Drawing Process by Using Taguchi Method," J. of KSPE, Vol. 14, No. 11, pp. 17-24, 1997.
- Park, J. S., Lee, D. J., and Im, J. B., "The Study for Construction of the Improved Optimization Algorithm by the Response Surface Method," J. of the Korean Society for Aeronautical Science and Flight Operation, Vol. 13, No. 3, pp. 22-33, 2005.
- Ha, C. Y., Kim, I. K., and Lee, S. I., "Vibration Analysis and Design of Ultrasonic Horn for Flip-Chip Bonding," Proceeding of the KSPE Spring Conference, pp. 525-526, 2009.
- Choi, J. H., Lee, S. J., and Choi, D. H., "Reliability-Based Tolerance Optimization of Mechanisms," Trans. of the Korean Society of Mechanical Engineers A, Vol. 23, No. 5, pp. 751-762, 1999.
- Shin, K. C., Kim, C. J., and Kim, D. G., "A Study on a Robust SQP Algorithm for Nonlinear Optimal Control Analysis," Proceeding of the KSAS Spring Conference, pp. 469-474, 2011.
- Lee, H. W. and Kwon, W. T., "Global Optimization of the Turning Operation Using Response Surface Method," Journal of the Korean Society of Machine Tool Engineers, Vol. 19, No. 1, pp. 114-120, 2010.
- Kim, T. S. and Kim, Y. Y., "Mac-based mode tracking in structural topology optimization," Computers and Structures, Vol. 74, No. 3, pp. 375-383, 2000. https://doi.org/10.1016/S0045-7949(99)00056-5