한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제29권8호
  • /
  • Pages.834-839
  • /
  • 2012
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

초정밀 진동 보조 가공 연구 동향

Current Trends of Vibration-Assisted Machining in Micro/Nano Scales

  • 투고 : 2012.05.24
  • 심사 : 2012.06.05
  • 발행 : 2012.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, mechanical components with miniaturized size, complex shape and fine surface are on demand from industries such as mobile electronics, medical devices and defense. The size of them is smaller than several millimeters, the shape has micro-holes, curve, or multi-step and the surface is mirror-like. This features are not able to be machined with the conventional machining, therefore electro-discharge machining (EDM), cutting, and laser machining have been applied. If the technologies are assisted by vibration, high aspect ratio and good surface are to be achieved. In this paper, prior and current researches of vibration-assisted machining are reviewed. Machining mechanisms with vibration-assisting are explained, their effects are shown, and vibrating apparatuses are discussed. Especially, comparison between with and without vibration assisting is presented. This review shows the vibration-assisted machining is effectively fabricate the components with small and complicated shape and fine surface finish.

키워드

참고문헌

  1. Digi-Key Co., http://parts.digikey.com/1/parts-kws/67539-card-connector-microsd.html, (Accessed 23 May 2012).
  2. Cook Group Medical Manufacturing Co., http://www.cookmedical.com/esc/dataSheet.do?id=5292, (Accessed 23 May 2012).
  3. Lee, S. H. and Li, X., "Study of the Surface Integrity of the Machined Workpiece in the EDM of Tungsten Carbide," Journal of Materials Processing Technology, Vol. 139, No. 1-3, pp. 315-321, 2003. https://doi.org/10.1016/S0924-0136(03)00547-8
  4. Brehl, D. E. and Dow, T. A., "Review of vibrationassisted machining," Precision Engineering, Vol. 32, No. 3, pp. 153-172, 2008. https://doi.org/10.1016/j.precisioneng.2007.08.003
  5. Jin, M. and Murakawa, M., "Development of a Practical Ultrasonic Vibration Cutting Tool System," Journal of Materials Processing Technology, Vol. 113, No. 1-3, pp. 342-347, 2001. https://doi.org/10.1016/S0924-0136(01)00649-5
  6. Xiao, M., Sato, K., Karube, S., and Soutome, T., "The Effect of Tool Nose Radius in Ultrasonic Vibration Cutting of Hard Metal," International Journal of Machine Tools and Manufacture, Vol. 43, No. 13, pp. 1375-1382, 2003. https://doi.org/10.1016/S0890-6955(03)00129-9
  7. Ma, C. X., Shamoto, E., Moriwaki, T., and Wang, L. J., "Study of Machining Accuracy in Ultrasonic Elliptical Vibration Cutting," International Journal of Machine Tools and Manufacture, Vol. 44, No. 12-13, pp. 1305-1310, 2004. https://doi.org/10.1016/j.ijmachtools.2004.04.014
  8. Liu, K., Li, X. P., Rahman, M., and Liu, X. D., "Study of Ductile Mode Cutting in Grooving of Tungsten Carbide with and without Ultrasonic Vibration Assistance," International Journal of Advance Manufacturing Technology, Vol. 24, No. 5-6, pp. 389-394, 2004. https://doi.org/10.1007/s00170-003-1647-5
  9. Zhong, Z. W. and Lin, G., "Ultrasonic Assisted Turning of an Aluminium-based Metal Matrix Composite Reinforced with SiC Particles," International Journal of Advance Manufacturing Technology, Vol. 27, No. 11-12, pp. 1077-1081, 2006. https://doi.org/10.1007/s00170-004-2320-3
  10. Nath, C. and Rahman, M., "Effect of Machining Parameters in Ultrasonic Vibration Cutting," International Journal of Machine Tools and Manufacture, Vol. 48, No. 9, pp. 965-974, 2008. https://doi.org/10.1016/j.ijmachtools.2008.01.013
  11. Zhang, D. Y., Feng, X. J., Wang, L. J., and Chen, D. C., "Study on the Drill Skidding Motion in Ultrasonic Vibration Microdrilling," International Journal of Machine Tools and Manufacture, Vol. 34, No. 6, pp. 847-857, 1994. https://doi.org/10.1016/0890-6955(94)90064-7
  12. Chang, S. S. F. and Bone, G. M., "Burr Size Reduction in Drilling by Ultrasonic Assistance," Robotics and Computer-Integrated Manufacturing, Vol. 21, No. 4-5, pp. 442-450, 2005. https://doi.org/10.1016/j.rcim.2004.11.005
  13. Liu, C. S., Zhao, B., Gao, G. F., and Zhang, X. H., "Study on Ultrasonic Vibration Drilling of Particulate Reinforced Aluminum Matrix Composites," Key Engineering Materials, Vol. 291-292, pp. 447-452, 2005. https://doi.org/10.4028/www.scientific.net/KEM.291-292.447
  14. Kang, B., Kim, G., Cho, S., Park, J., and Yang, M., "The Effects of Ultrasonic Vibration on Surface Finish in Nano-second Laser Machining," Journal of Korean Society of Machine Tool Engineers, Vol. 19, No. 3, pp. 402-406, 2010.
  15. Kim, W., Jeon, Y., and Cho, S.-H., "Analysis and Experiment of Ultrasonic Vibration Mechanism using PZT Actuator for Precision Laser Machining," Journal of the KSPE, Vol. 28, No. 12, pp. 1347-1352, 2011.
  16. Park, J., Yoon, J., and Cho, S.-H., "Vibration Assisted Femto Second Laser Machining on Metal," Optics and Lasers in Engineering, Vol. 50, No. 6, pp. 833-837, 2012. https://doi.org/10.1016/j.optlaseng.2012.01.017
  17. Endo, T., Tsujimotoa, T., and Mitsuib, K., "Study of Vibration-assisted Micro-EDM - The Effect of Vibration on Machining Time and Stability of Discharge," Precision Engineering, Vol. 32, No. 4, pp. 269-277, 2008. https://doi.org/10.1016/j.precisioneng.2007.09.003
  18. Masuzawa, T. and Heuvelman, C. J., "Self Flushing Method with Spark- Erosion Machining," Annals of the CIRP, Vol. 32, No. 1, pp. 109-111, 1983. https://doi.org/10.1016/S0007-8506(07)63372-1
  19. Kremer, D., Lebrun, J. L., Hosari, B., and Moisan, A., "Effects of Ultrasonic Vibrations on the Performances in EDM," Annals of the ClRP, Vol. 38, No. 1, pp. 199-202, 1989. https://doi.org/10.1016/S0007-8506(07)62684-5
  20. Kremer, D., Lhiaubet, C., and Moisan, A., "Study of the Effect of Synchronizing Ultrasonic Vibrations With Pulses in EDM," Annals of the CIRP, Vol. 40, No. 1, pp. 211-214, 1991. https://doi.org/10.1016/S0007-8506(07)61970-2
  21. Ghoreishi, M. and Atkinson, J., "A Comparative Experimental Study of Machining Characteristics in Vibratory, Rotary and Vibro-rotary Electro-discharge Machining," Journal of Materials Processing Technology, Vol. 120, No. 1-3, pp. 374-384, 2002. https://doi.org/10.1016/S0924-0136(01)01160-8
  22. Gao, C. and Liu, Z., "A Study of Ultrasonically Aided Micro-electrical-discharge Machining by the Application of Work Piece Vibration," Journal of Material Processing Technology, Vol. 139, No. 1-3, pp. 226-228, 2003. https://doi.org/10.1016/S0924-0136(03)00224-3
  23. Chern, G. L. and Chuang, Y., "Study on Vibration-EDM and Mass Punching of Micro-holes," Journal of Material Processing Technology, Vol. 180, No. 1-3, pp. 151-160, 2006. https://doi.org/10.1016/j.jmatprotec.2006.03.238
  24. Lee, S. H. and Li, X., "Study of the Surface Integrity of the Machined Workpiece in the EDM of Tungsten Carbide," Journal of Materials Processing Technology, Vol. 139, No. 1, pp. 315-321, 2003. https://doi.org/10.1016/S0924-0136(03)00547-8
  25. Abdullah, A., Shabgard, M. R., Ivanov, A., and Shervanyi-Tabar, M., "Effect of Ultrasonic Assisted EDM on the Surface Integrity of Cemented Tungsten Carbide (WC-Co)," International Journal of Advance Manufacturing Technology, Vol. 41, No. 3-4, pp. 268-280, 2009. https://doi.org/10.1007/s00170-008-1476-7
  26. Zheng, H. Y. and Huang, H., "Ultrasonic vibrationassisted femtosecond laser machining of microholes," J. Micromechanics and Microengneering, Vol. 17, No. 8, pp. N58-N61, 2007. https://doi.org/10.1088/0960-1317/17/8/N03