참고문헌
- P. H. Schweitzer, "Penetration of Oil Spray", Pennsylvania State College Bulletin, 46, 1937.
- Y. Wakuri, M. Fujii, T. Amitani and R. Tsuneya, "Studies of Penetration of Fuel Spray in a Diesel Engine", Bull. JSME, Vol. 3, 1963, pp. 123-130.
- J. C. Dent, "A basis for the comparison of various experimental methods for studying penetration", SAE paper 710571, 1971.
- N. Hay and P. L. Jones, "Comparison of the Various Correlations for Spray Penetration", SAE paper 720776, 1972.
- R. D. Reitz and F. V. Bracco, "Mechanism of Atomization of a Liquid Jet", Physics of Fluids, Vol. 25, No. 2, 1982, pp. 1730-1741. https://doi.org/10.1063/1.863650
- G. I. Taylor, "Generation of ripples by wind blowing over a viscous fluid", Collected works of G. I. Taylor, Vol. 3, 1940, Cambridge University Press.
- J. Rife and J. B. Heywood, "Photographic and Performance Studies of Diesel Engine Combustion with Rapid Compression Machine", SAE paper, 74098, 1974.
- T. Kamimoto, H. Yokota and H. Kobayashi, "Effects of high pressure injection on soot formation process in a rapid compression machine to simulate Diesel flames", SAE paper 871610, 1987.
- R. Cavaliere, R. Ragucci, A. D'alessio and C. Noviello, "Analysis of Diesel sprays through two dimensional laser light scattering", Twenty-Second Symposium on (International) on Combustion, 1988, Combustion Institute, pp. 1973-1981.
- J. S. Gregory, O. L. Gulder and D. R. Snelling, "the structure of the dense core region in transient Diesel sprays," Twenty-Fifth Symposium on (International) on Combustion, 1994, Combustion Institute, pp. 371-379.
- H. Kosaka, Y. H. Won and T. Kaminmoto, "A study of the structure of Diesel sprays using 2-D imaging techniques", SAE Transaction, Vol. 101, Sec. 3, 1992, pp. 175-186.
- H. Hiroyasu and M. Arai, "Fuel spray penetration and spray angle in Diesel engines", Trans. of JSME, Vol. 44, 1980, pp. 3208-3220.
- K. S. Varde and D. M. Popa, "Diesel Fuel Spray Penetration at High Injection Pressures," SAE Transactions, Paper 830448, 1983.
- J. D. Naber and D. L. Siebers, "Effects of gas density and vaporization on penetration and dispersion of Diesel sprays," SAE paper 960034, 1996.
- M. N. Svrcek, S. L. Miller and C. F. Edwards, "Diesel spray behavior at compression ratios up to 100:1", Atomization and Sprays, Vol. 20, No. 5, 2010, pp. 453-465. https://doi.org/10.1615/AtomizSpr.v20.i5.60
- J. M. Desantes, R. Payri, F. J. Salvador and V. Soare, "Study of the influence of geometrical and injection parameters on diesel sprays characteristics in isothermal conditions", SAE paper, 2005-01-0913, 2005.
- C. H. Lee, Y. Wang and R. D. Reitz, "CFD simulation of diesel sprays over a wide range of ambient gas densities using an improved gas jet spray model", Atomization and Sprays, Vol. 21, No. 7, 2011, pp. 591-609. https://doi.org/10.1615/AtomizSpr.2011003978
- N. Abani and R. D. Reitz, "Unsteady Turbulent Round Jets and Vortex Motion," Physics of Fluids, Vol. 19, No. 1, 2007, 125102. https://doi.org/10.1063/1.2821910
- A, Amsden, KIVA-3V, A Block-Structured KIVA program for Engines with Vertical or Canted Valves, LA- 13313-MS, Los Alamos National Laboratory, 1997.
- C. Crowe, M. Sommerfeld and Y. Tsuji, "Multiphase Flow with Droplets and Particles Boca Raton: CRC Press, 1998, Chap. 2.
- Y. Wang, H. W. Ge and R. D. Reitz, "Validation of Meshand Time step-Independent Spray Models for Multi- Dimensional Engine CFD Simulation, SAE paper 2010- 01-0626, 2010.
- P. J. Tennison, T. L. Georjon, P. V. Farrell and R. D. Reitz, "An Experimental and numerical study of sprays from a common rail injection system for use in an HSDI Diesel engine", SAE paper, 980810, 1998.
- W. Bosch, "The fuel rate indicator: a new measuring instrument for display of the characteristics of individual injection", SAE paper 660749, 1966.