DOI QR코드

DOI QR Code

Characterization of the deformation of a disc cutter in linear rock cutting test

암석의 선형절삭실험에 의한 디스크커터의 변형특성 평가

  • 장수호 (한국건설기술연구원 SOC성능연구소 Geo-인프라연구실) ;
  • 최순욱 (한국건설기술연구원 SOC성능연구소 Geo-인프라연구실) ;
  • 박영택 (한국건설기술연구원 SOC성능연구소 Geo-인프라연구실) ;
  • 이규필 (한국건설기술연구원 SOC성능연구소 Geo-인프라연구실) ;
  • 배규진 (한국건설기술연구원 SOC성능연구소 Geo-인프라연구실)
  • Received : 2012.04.21
  • Accepted : 2012.05.16
  • Published : 2012.05.31

Abstract

Disc cutter is a key cutting tool for rock excavation by TBMs. This study aimed to characterize the deformation of a cutter ring by strain measurement as well as infrared thermal camera measurement during a series of linear cutting tests for a hard rock. The strain measurement results indicated that the cutter ring clearly showed a linear elastic behavior. The data obtained from the infrared thermal camera measurement demonstrated that the maximum temperature increase in the cutter ring was below $14.4^{\circ}C$. The deformation and temperature increase of the cutter ring during rock cutting were insignificant in a given cutting test condition of this study.

디스크커터는 암석의 절삭을 위해 TBM에 사용되는 핵심 굴착도구이다. 본 연구에서는 디스크커터에 의한 암석의 절삭 시에 커터 링에 발생하는 변형특성을 파악하기 위하여, 경암에 대한 선형절삭실험 시에 커터 링에 부착한 일련의 변형률게이지와 적외선 열화상 카메라에 의한 계측을 실시하였다. 실험결과, 커터 링은 매우 뚜렷한 선형탄성 거동을 보였으며, 암석 절삭에 의한 커터 링의 온도 상승은 $14.4^{\circ}C$ 이내로 나타났다. 따라서 본 연구에서 수행한 선형절삭실험 조건에서는 절삭으로 인한 커터 링의 변형과 온도상승이 크지 않았음을 알 수 있었다.

Keywords

References

  1. 김영근, 문준식, 심재법, 이승복, 최창림, 천윤철 (2011), "도심지 대단면 복합지반 NATM과 TBM 터널공법의 비교위험도 분석", 한국터널지하공간학회논문집, 제13권 제1호, pp. 19-32.
  2. 박철환 (2005), "암반용 TBM의 커터수명 평가연구", 한국지질자원연구원 논문집, KIGAM Bulletin, 제9권 제3호, pp. 34-46.
  3. 장수호, 최순욱, 박관인, 전석원 (2005), "선형절삭시험에 의한 TBM 디스크커터의 절삭성능 평가", 대한토목학회논문집, 제25권 제6C호, pp. 429-436.
  4. 장수호, 최순욱, 이규필, 배규진 (2011a), "TBM 굴진자료의 다변량 회귀분석에 의한 암반대응형 TBM의 설계모델 도출", 한국터널지하공간학회논문집, 제13권 제6호, pp. 531-555.
  5. 장수호, 최순욱, 이규필, 배규진 (2011b), "TBM 굴진성능 예측을 위한 NTNU시험결과의 분석", 한국터널지하공간학회논문집, 제13권 제3호, pp. 243-260.
  6. 한국터널공학회 (2008), "터널 기계화시공 설계편", 터널공학시리즈3, 도서출판 씨아이알, pp. 259-262.
  7. Beer, G. (2010), "Technology innovation in underground construction", CRC Press, pp. 299-314.
  8. Broissia, M., Aristaghes, P., Bappler, K., Gal, G., Del Corso, C. Bruland, A., Armada, M., Duchateau, D. (2001), "Global optimisation of disc cutter tool life for tunnel boring machine", Proceedings of the 4th EUROTHEN workshop, Stockholm, Sweden, July 2001, pp. 1-16.
  9. Bruland, A. (1998), "Hard rock tunnel boring - Drillability test methods", Vol. 8, Doctoral Theses at NTNU 1998:81, pp. 13-15.
  10. Cho, J.W, Jeon, S.W., Yu, S.H., Chang, S.H. (2010), "Optimum spacing of TBM disc cutters: A numerical simulation using the three-dimensional dynamic fracturing method", Tunnelling and Underground Space Technology, Vol. 25, Issue 3, pp. 230-244. https://doi.org/10.1016/j.tust.2009.11.007
  11. Gere, J.M, Timoshenko, S.P. (1990), "Mechanics of Materials(THIRD EDITION)", PWS-KENT, pp. 73.
  12. Herrenknecht (2007), "Herrenknecht cutter tools", Herrenknecht AG, pp. 6.
  13. Kasling, H., Thuro, K. (2010), "Determining rock abrasivity in the laboratory", Proceedings of the European Rock Mechanics Symposium EUROCK 2010, Lausanne, Switzerland, 15-18 June 2010, pp. 4-7.
  14. Roby, J. Sandell T., Kocab, J., Lindbergh, L. (2008), "The Current State of Disc Cutter Design and Development Directions", Proceedings of 2008 North American Tunnelling Conference (NAT2008), Society for Mining, Metallurgy & Exploration, pp. 36-45.
  15. Rostami, J. (1997), "Development of a force estimation model for rock fragmentation with disc cutters through theoretical and physical measurement of crushed zone pressure", Ph.D Dissertation, Colorado School of Mines, Golden, Colorado, pp. 68-69.

Cited by

  1. Experimental evaluation of the effects of cutting ring shape on cutter acting forces in a hard rock vol.15, pp.3, 2013, https://doi.org/10.9711/KTAJ.2013.15.3.225
  2. A experimental study on the loads and temperature acting on the shaft of a disc cutter during linear rock cutting test vol.15, pp.3, 2013, https://doi.org/10.9711/KTAJ.2013.15.3.237
  3. Refurbishment of a 3.6 m earth-pressure balanced shield TBM with a domestic cutterhead and its field verification vol.17, pp.4, 2015, https://doi.org/10.9711/KTAJ.2015.17.4.457
  4. Performance estimation of conical picks with slim design by the linear cutting test (II): depending on skew angle variation vol.16, pp.6, 2014, https://doi.org/10.9711/KTAJ.2014.16.6.585
  5. Comparative analysis of cutter acting forces and axial stresses of single and double disc cutters by linear cutting tests vol.16, pp.2, 2014, https://doi.org/10.9711/KTAJ.2014.16.2.181
  6. Performance estimation of conical picks with slim design by the linear cutting test (I): depending on attack angle variation vol.16, pp.6, 2014, https://doi.org/10.9711/KTAJ.2014.16.6.573
  7. Manufacturing of an earth pressure balanced shield TBM cutterhead for a subsea discharge tunnel and its field performance analysis vol.16, pp.2, 2014, https://doi.org/10.9711/KTAJ.2014.16.2.161
  8. Performance estimation depending on the insert size of conical picks by linear cutting test vol.18, pp.2, 2016, https://doi.org/10.9711/KTAJ.2016.18.2.221