Journal of Korea Foundry Society (한국주조공학회지)

Korea Foundry Society (한국주조공학회)
권호 표지
DOI QR코드

DOI QR Code

Fluidity and Mechanical Properties of Open Cell AZ31 Mg Alloy Foam

  • Yue, Xue-Zheng (i-Cube Group, ERI, School of Nano and Advanced Materials Engineering, Gyeongsang National University) ;
  • Hur, Bo-Young (i-Cube Group, ERI, School of Nano and Advanced Materials Engineering, Gyeongsang National University)
  • Received : 2012.03.23
  • Accepted : 2012.06.22
  • Published : 2012.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

발포금속은 초경량 재료로서 폐기공과 개기공의 두 가지 형태의 구조를 지니고 있으며 폐기공은 내충격성, 흡음성, 단열성의 기능을 지니고 있고, 개기공은 필터, 생체지지대, 촉매재, 열방출재 등으로 사용되고 있다. 개기공발포재는 삼차원 구조모양으로 프리커서를 이용한 압력정밀주조나 기공입자용출법으로 제조하고 있으나 기공의 크기나 셀의 형상, 두께 등을 조절하기에 어려움이 있다. 이를 해결하기 위하여 환경친화적인 펄라이트를 사용하여 목적하는 크기의 그래뉼을 제조한 후, 용융마그네슘합금을 감압주조법으로 주조하여 그래뉼의 크기로 기공율을 조절하고, 주형의 온도와 압력에 따른 유동의 길이를 측정하였다. 그래뉼 직경이 2.3 $mm{\O}$ 일때에 주형의 온도 $300^{\circ}C$ 이상, 압력이 5000 Pa 이상에서 유동길이 6.5 cm 이상을 얻었다.

Keywords

References

  1. B. Y. Hur, Y. S. Um and S. Y. Kim : Trends in Metals & Materials Engineering, "Development of Fabrication Technology for Al Foam with Lightweight -Strength", 17 (2004) 37-46
  2. B. Y. Hur, S. H. Park and A. Hiroshi : Mater. Sci. Forum, "Viscosity and Surface Tension of Al and Effects of Additional Element", 439 (2003) 51-56
  3. John Banhart: Int. J. Vehicle Des. Manufacture, "Charaterisation and application of cellular metals and metal foams", 37 (2005) 114 https://doi.org/10.1504/IJVD.2005.006640
  4. D-H. Yang, B. Y. Hur and S-R. Yang: J. Alloys Compd, "Study on fabrication and foaming mechanism of Mg foam using $CaCO_3$ as blowing agent", 461 (2008) 221-227 https://doi.org/10.1016/j.jallcom.2007.07.098
  5. Younghwan Song, Soo Han Park, Sang Youl Kim, Changhwan Seo and Boyoung Hur: Solid State Phenom, "A Study on Mg-Al Alloy Foams by Melt Foaming Method", 125 (2007) 1841-1844
  6. P. Sevilla, C. Aparicio, J. A. Planell and F. J. Gil: J Alloy Comp, "Comparison of the mechanical properties between tantalum and nickel-titanium foams implant materials for bone ingrowth applications", 439 (2007), 67-73 https://doi.org/10.1016/j.jallcom.2006.08.069
  7. W. Y Jang: Int J Solid Struct, "On the microstructure of open-cell foams and its effect on elastic properties", 45(7,8) (2008) 1845-1875 https://doi.org/10.1016/j.ijsolstr.2007.10.008
  8. A. J. and A. K: Metals 2011, "The Manufacture and Characterisation of Aluminium Foams Made by Investment Casting Using Dissolvable Spherical Sodium Chloride Bead Preforms", 1 (2011) 49-64 https://doi.org/10.3390/met1010049
  9. M. G and C. Hintz: Proceeding of material week 2000 conf., "Determination of Parameters for Infiltrated Metallic Foam Composites" (2000) 781.
  10. I. N. O.: Mater Sci Forum, "Composite production by pressure infiltration", 589 (2008) 137-142
  11. J. E. Niesse, M. C. Flemings and H. F. Taylor: Trans. AFS "Application of Theory in Understanding Fluidity of Metals," 67 (1959) 685-697
  12. M. C. Flemings: in Proceedings of the 30th International Foundry Congress, "Fluidity of Metals-Techniques for Producing Ultra Thin Section Castings", (1963) 61-81
  13. I. Jeon and T. Asahina: Acta Mater, "The effect of structural defects on the compressive behavior of closed-cell Al foam", 53 (2005) 3415-3423 https://doi.org/10.1016/j.actamat.2005.04.010
  14. J. Campbell: Castings, Butterworth-Heinemann, Oxford, Boston, (1993) 288
  15. M. X. Xu: Master thesis(in Chinese), "Preparation and compression property of foamed magnesium alloy", Taiyuan University of Technology in china (2009) 6.
  16. Mukai T, Kanahashi H and Miyoshi T: Scripta Mater, "Experimental study of energy absorption in a closed-celled aluminum foam under dynamic loading", 40 (1999) 921-927 https://doi.org/10.1016/S1359-6462(99)00038-X
  17. Sirong Yu: Eng Mater Des, "Compressive property and energy absorption characteristic of open-cell ZA22 foams", 30 (2009) 87-90

Cited by

  1. Effect of fluidity on the manufacturing of open cell magnesium alloy foams vol.4, pp.1, 2016, https://doi.org/10.1016/j.jma.2015.11.007
  2. Current Status and Recent Developments in Porous Magnesium Fabrication 2017, https://doi.org/10.1002/adem.201700562